Try the full study dashboard free, no signup: practice, flashcards and your Exam Readiness Score. Open it →
Home / Study guides / ASNT 9712 Level II MT
Study guide · Last updated November 2026

ASNT 9712 Level II MT Exam Study Guide (2026)

Everything the ASNT 9712 Level II, Magnetic Particle Testing (MT), written parts tests, topic by topic: what each section covers, the facts that come up most, and how to study it. Pair it with the free 15-question practice test.

The exam at a glance

Questions110 written items over three computer-based elements: General 50, Specific 40 (Pre- and In-Service) and Instruction Preparation 20. A practical exam (bench or yoke, 2 pieces) is also required
Time5 hours of written exams: General 2 hours, Specific 2 hours, Instruction Preparation 1 hour. Each practical (bench or yoke) is a further 1 hour
Passing scoreAt least 70% on each written element (General, Specific and Instruction Preparation) and at least 80% on each practical specimen
FormatComputer-based with an on-screen calculator. ASNT's candidate pages do not state the reference-material rules, so confirm them with ASNT. Instruction Preparation uses multiple-choice and multiple-response items. This prep covers only the written parts, with 4-option practice items; it does not cover the hands-on practical exam
Certifying bodyASNT Certification Services LLC (American Society for Nondestructive Testing)
Test providerWritten exams at Pearson VUE test centers or ASNT Authorized Exam Centers (computer-based); practical exams only at Authorized Exam Centers

Mind map: the whole exam on one screen

ASNT 9712 Level II MT
MT Principles and Theory
Field created by current flowing through a partCurrent type that best suits fine surface cracks with a yokeParticle system best for fine surface cracks on a benchRule that gives field direction around a conductor
Use and Care of MT Equipment and Accessories
Settling range for wet visible bathsAmmeter accuracy required by Article 7Standard used to check a stationary unit with a central conductorMinimum UV-A on the examined surface
MT Techniques and Demagnetization
Article 7 direct contact currentArticle 7 prod spacing rangeArticle 7 high fill-factor coil equationLowest L/D at which the coil equations apply without pole extenders
Interpreting, Evaluating and Documenting Results
6 key facts
Codes, Standards, Specifications and Procedures
6 key facts
Specific Exam: Pre- and In-Service Applications
6 key facts
Instruction Preparation
6 key facts
Free with an account

Read the complete ASNT 9712 Level II MT study notes for “MT Principles and Theory”

Our first full set of comprehensive notes, about 14 minutes of reading: How MT works · Field type and direction · Choosing the magnetizing current · Selecting particles · Material properties and oversight, a worked exam example, the traps examiners use and a one-minute recap. Create a free account to read it and see how premium notes work before you decide.

Open the free dashboard

1. MT Principles and Theory

First domain of the General exam outline for exams after 15 December 2026: selecting field type, magnetizing current and particle type, and guiding Level I personnel. It absorbs the earlier topics Principles, Flux Fields, Effects of Discontinuities and Magnetization by Means of Electric Current. ASNT publishes no percentage weights.

Key facts

  • MT finds surface and some near-surface discontinuities in ferromagnetic materials by the particles collecting at flux leakage.
  • Flaws show best at 90° to the magnetic field and are generally detectable within about 45° of that direction.
  • Current through a part or conductor gives a circular field; a coil or yoke gives a longitudinal field.
  • Permeability is how easily a material is magnetized, retentivity is how much field it keeps, and coercive force is what it takes to remove that field.
  • AC concentrates the field at the surface (skin effect). Rectified current reaches deeper, and half-wave with dry powder favors subsurface flaws.
  • Wet fluorescent particles give the best sensitivity to fine surface cracks; dry powder suits rough surfaces and field work.
  • A Level II provides technical guidance to, and oversight of, Level I personnel and trainees.

Flashcards

Field created by current flowing through a partA circular field around the current path.
Current type that best suits fine surface cracks with a yokeAC, because of skin effect and particle mobility.
Particle system best for fine surface cracks on a benchWet fluorescent.
Rule that gives field direction around a conductorRight-hand rule: thumb with current, fingers with field.

Exam tip: For every field-direction question, draw the current path, then the field, then the flaw. If the flaw runs along the field, the setup is wrong.

2. Use and Care of MT Equipment and Accessories

Second domain after 15 December 2026, and the longest list: verifying calibration, daily standardizations (10 lb and 40 lb lift tests, Ketos ring, QQIs), bath concentration and contamination, light checks, field meters and housekeeping. It replaces the earlier Equipment and Quality Control topics.

Key facts

  • Article 7 calibrates ammeters at least once a year and after major repair, with meter readings within ±10% of full scale, checked at a minimum of three output levels.
  • Yokes: AC must lift 10 lb and DC or permanent magnet yokes 40 lb, at the maximum pole spacing to be used.
  • Settling test: wet fluorescent 0.1 to 0.4 mL per 100 mL; wet visible 1.2 to 2.4 mL per 100 mL. Settle about 30 minutes for water baths and 60 for oil baths.
  • A water-break test checks that a water bath wets the part surface properly.
  • Fluorescent work: UV-A of at least 1,000 µW/cm² and ambient visible light of no more than 2 fc (20 lx) at the surface. Visible work: at least 100 fc (1,000 lx).
  • A QQI shim or pie gauge shows field direction and relative adequacy. A Hall-effect meter gives a tangential field reading, with 30 G as the common minimum.
  • A Ketos ring, magnetized with a central conductor, checks overall system performance on stationary units.
  • Temperature limits under Article 7: wet particles up to 135 °F (57 °C) and dry particles up to 600 °F (315 °C).

Flashcards

Settling range for wet visible baths1.2 to 2.4 mL per 100 mL.
Ammeter accuracy required by Article 7Within ±10% of full scale.
Standard used to check a stationary unit with a central conductorA Ketos ring.
Minimum UV-A on the examined surface1,000 µW/cm².

Exam tip: The new outline lists tools by name. Be able to say what each one checks, how often and what action a failure requires.

3. MT Techniques and Demagnetization

Third domain after 15 December 2026: selecting the technique; applying direct contact, central conductor, prod, coil and yoke techniques; examining castings, forgings and welds; and applying and verifying demagnetization.

Key facts

  • ASME direct contact: 300 to 800 A per inch of diameter. A central conductor uses the same current range.
  • Prods: spacing of 3 to 8 in; 100 to 125 A per inch for 3/4 in and thicker, 90 to 110 A per inch for thinner material.
  • Low fill-factor coil near the wall: NI = 45,000 ÷ (L/D), ±10%. Use a maximum L/D of 15; below L/D of 2, pole extenders are needed.
  • A coil's effective field extends about 9 in either side of the coil, so long parts need multiple shots with overlap.
  • Prods can cause arc strikes, so use clean tips and proper contact before applying current.
  • Continuous method: apply particles while the current flows; with wet baths, stop the flow just before the final current.
  • Demagnetize from a field higher than the one applied, reducing and reversing it. A common limit for residual field is 3 G (240 A/m), with the part removed from the coil before the current stops.

Flashcards

Article 7 direct contact current300 to 800 A per inch of diameter.
Article 7 prod spacing range3 to 8 in.
Article 7 high fill-factor coil equationNI = 35,000 ÷ (L/D + 2), ±10%.
Lowest L/D at which the coil equations apply without pole extenders2.

Exam tip: Write the current rules on your note board before starting and check which thickness, position or L/D limit applies before calculating.

Test yourself on these topics

Take the free 15-question ASNT 9712 Level II MT test, then save your results to unlock your Readiness Score and the mistakes bank.

Start the free test

4. Interpreting, Evaluating and Documenting Results

Fourth domain after 15 December 2026: characterizing relevant and nonrelevant indications, spotting false indications, sizing, recording test data and reporting findings. It replaces the earlier Types of Discontinuities and Evaluation Techniques topics.

Key facts

  • False indications come from poor processing or handling, such as magnetic writing or particles held by surface roughness.
  • Nonrelevant indications are real leakage fields from design features, such as abrupt section changes or a magnetized edge.
4 more key facts, 9 key notes, 115 flashcards and 425 practice questions for this topic are in premium.

Flashcards

Difference between false and nonrelevant indicationsFalse comes from processing; nonrelevant is real leakage at a design feature.

Exam tip: Ask two questions in order: is it real leakage, and is it caused by a discontinuity? That separates false, nonrelevant and relevant indications.

5. Codes, Standards, Specifications and Procedures

Fifth domain after 15 December 2026: applying safety protocols, developing MT work instructions, selecting and applying procedures (equations, formulas and tests), and determining acceptance or rejection.

Key facts

  • ASME Section V Article 7 tells you how to examine. The referencing code sets acceptance criteria, for example Section VIII Division 1 Appendix 6 for vessels.
  • Appendix 6: indications over 1/16 in are relevant; linear means a length greater than three times the width.
4 more key facts, 8 key notes, 115 flashcards and 425 practice questions for this topic are in premium.

Flashcards

Size above which an Appendix 6 indication is relevantOver 1/16 in.

Exam tip: Look for the governing document first. A correct value from E1444 can be wrong for a job running to ASME Section V.

6. Specific Exam: Pre- and In-Service Applications

The 40-item, 2-hour Specific exam covers codes, applications and techniques for the single ASNT 9712 Pre- and In-Service sector, which includes manufacturing, castings, forgings and welds.

Key facts

  • Article 7 requires at least two examinations of each area, with lines of flux about perpendicular to each other.
  • Offset central conductors cover four conductor diameters along the circumference, with about 10% overlap.
4 more key facts, 8 key notes, 115 flashcards and 425 practice questions for this topic are in premium.

Flashcards

Offset central conductor coverageFour conductor diameters along the circumference.

Exam tip: Specific questions reward method over memory. Identify the product form, the flaw direction and the governing code in the stem.

7. Instruction Preparation

A separate 20-item, 1-hour computer-based element with multiple-choice and multiple-response items, testing the creation of a written instruction. Weighting: foreword 5%, personnel 5%, equipment and media 5%, product 10%, test conditions 10%, detailed instructions 40%, recording and classifying results 20%, reporting 5%.

Key facts

  • An NDT instruction describes the exact steps for carrying out a test according to a standard or procedure.
  • Detailed instructions, including settings, carry the largest share at 40%.
4 more key facts, 8 key notes, 110 flashcards and 425 practice questions for this topic are in premium.

Flashcards

Instruction Preparation items and time20 items in 1 hour.

Exam tip: In multiple-response items, judge each statement on its own. Choose only those that a Level I could carry out exactly as written.

How to pass

  • Check your exam date against 15 December 2026. Earlier General exams use the ten-topic outline; later ones use the five job-task domains, including QQIs, Ketos rings and field meters.
  • Each written element has its own 70% minimum, so a strong General score can't offset a weak Instruction Preparation result.
  • Instruction Preparation is 20 items in 1 hour, and the detailed test instructions carry 40% of its weighting. Practice writing settings that a Level I could follow with no guesswork.
  • Know the current formulas and their limits cold: direct contact, prods by thickness, the L/D cap on the coil equation and offset central conductor coverage.

Frequently asked questions

How long should I study for the ASNT 9712 Level II MT exam?

Most working candidates need 4 to 8 weeks at 45 to 60 minutes a day. Book your exam once your Readiness Score has stayed at 80 or higher for about a week.

Can I take the ASNT 9712 Level II MT exam online?

No. ASNT NDT Level III exams are taken in person, on a computer, at Pearson VUE test centers or ASNT Authorized Exam Centers. Format: computer-based with an on-screen calculator. asnt's candidate pages do not state the reference-material rules, so confirm them with asnt. instruction preparation uses multiple-choice and multiple-response items. this prep covers only the written parts, with 4-option practice items; it does not cover the hands-on practical exam. Check ASNT's current exam information for the rules.

What score do I need to pass the ASNT 9712 Level II MT exam?

At least 70% on each written element (General, Specific and Instruction Preparation) and at least 80% on each practical specimen. The exam has 110 written items over three computer-based elements: general 50, specific 40 (pre- and in-service) and instruction preparation 20. a practical exam (bench or yoke, 2 pieces) is also required and a time limit of 5 hours of written exams: general 2 hours, specific 2 hours, instruction preparation 1 hour. each practical (bench or yoke) is a further 1 hour.

What are the most tested topics?

The outline covers mt principles and theory, use and care of mt equipment and accessories, mt techniques and demagnetization, interpreting, evaluating and documenting results, codes, standards, specifications and procedures, specific exam: pre- and in-service applications, instruction preparation. Use the free practice test to see which ones you need most.

The premium ASNT 9712 Level II MT study path

Premium ASNT 9712 Level II MT prep is studied one topic at a time. Each step starts with that topic's key notes and flashcard deck, then its own question sets of 25, so you master one topic before you move to the next. When every topic is strong, the 6 full mock exams show you're ready.

3,000practice questions, every answer explained
6full-length mock exams, 110 questions each, timed
800flashcards with spaced repetition, sorted by topic
60comprehensive key notes across 7 topics

Your step-by-step study path

  1. 1
    MT Principles and Theory9 key notes, 115 flashcards, then 450 practice questions in 18 sets of 25
    Notes free with an account
  2. 2
    Use and Care of MT Equipment and Accessories9 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  3. 3
    MT Techniques and Demagnetization9 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  4. 4
    Interpreting, Evaluating and Documenting Results9 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  5. 5
    Codes, Standards, Specifications and Procedures8 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  6. 6
    Specific Exam: Pre- and In-Service Applications8 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  7. 7
    Instruction Preparation8 key notes, 110 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  8. Final step: 6 full mock exams110 questions each, timed like test day. Pass them, then book your exam.
    Premium

Get every note, flashcard and question

Most popular · cancel anytime

Premium Monthly

$147/month
per exam
About $4.83 a day · less than a retake fee, for the certification that lets you approve procedures and certify technicians
  • One ASNT Level III exam of your choice: Basic, UT, RT or MT
  • 3,000 practice questions + 6 full mock exams per exam
  • 800 flashcards + 60 key notes per exam, by topic, plus mind maps
  • Spaced repetition + mistakes bank
  • Readiness Score & detailed reports
  • Video lessons as they release
  • Content updates during your access
  • 5 bonuses: NDT formula sheet, discontinuity atlas, study planner and more
  • Pass Guarantee: complete the prep, pass or 100% back

Renews monthly until you cancel. Cancel in two clicks from your account; you keep access until the end of the month you've paid for. No minimum term.

Best value · 3 months free

Premium Yearly

$1,323/year
per exam
Pay for 9 months, get 12. Save $441 against paying monthly.
  • One ASNT Level III exam of your choice: Basic, UT, RT or MT
  • 3,000 practice questions + 6 full mock exams per exam
  • 800 flashcards + 60 key notes per exam, by topic, plus mind maps
  • Spaced repetition + mistakes bank
  • Readiness Score & detailed reports
  • Video lessons as they release
  • Content updates during your access
  • 5 bonuses: NDT formula sheet, discontinuity atlas, study planner and more
  • Pass Guarantee: complete the prep, pass or 100% back

Renews once a year until you cancel. We email you before each renewal. Cancel any time from your account; you keep access until the end of the year you've paid for.

Pass Guarantee. Complete the full prep, sit your exam within 60 days, and if you don't pass we refund 100% of your subscription payments. See the requirements
Secure checkout by Stripe Card, Apple Pay, Google Pay Pass Guarantee

Summarized from ASNT's official candidate information and the rules cited, checked October 2026. Confirm current requirements with ASNT Certification Services LLC (American Society for Nondestructive Testing).

Start the free test