ASNT 9712 Level II, Liquid Penetrant Testing (PT), written parts: free practice test
ASNT's ISO 9712-based Level II certification for liquid penetrant testing, requiring 5 days of training, 60 days of experience and four examination elements. The General exam covers PT principles, method selection, inspection and evaluation of indications, and procedures and standards. This prep covers only the three written elements, not the practical exam.
Watch the free 4:34 video lesson: the key ASNT 9712 Level II PT concepts →
Premium: 3,000 practice questions, 6 full mock exams, 800 flashcards and 60 comprehensive key notes, topic by topic. See the study path ·
- Lesson 2: Capillary action, surface tension and contact angleThe physics of entry and bleed-out, and how each property shifts sensitivity.
- Lesson 3: What penetrant testing can and cannot detectSurface-open limits, porous materials and comparison with MT and VT.
- Lesson 4: Developer action and how indications formReverse capillary action, contrast and why indications look wider than flaws.
- Lesson 5: Fluorescent and visible dye penetrants comparedType I and II, UV-A excitation, contrast and when each is required.
- Lesson 6: Sensitivity levels and what drives themFluorescent sensitivity levels, their order and how to match them to flaws.
- Lesson 7: Removal methods A to D in depthWater-washable, lipophilic, solvent-removable and hydrophilic removal step by step.
- Lesson 8: Developer forms and where each fitsDry, water-soluble, water-suspendable and nonaqueous developers compared.
- Lesson 9: Choosing a PT system for the jobSurface, volume, location and flaw size used to eliminate wrong options.
- Lesson 10: Pre-cleaning and surface preparationDegreasing, coating removal, smeared metal and when etching is needed.
- Lesson 11: Penetrant application, dwell and temperature limitsTable T-672 dwell times, the cold-range rule and nonstandard qualification.
- Lesson 12: Excess removal and emulsification controlRinse pressure and temperature limits, over-emulsification and solvent wiping.
- Lesson 13: Drying, developing and the interpretation clockDrying limits, developer coating and when interpretation time starts.
- Lesson 14: Viewing conditions for fluorescent and visible PTUV-A intensity, ambient light, dark adaptation and white-light minimums.
- Lesson 15: Reading cracks, porosity, laps and cold shutsHow each discontinuity bleeds out and how to tell them apart.
- Lesson 16: Relevant, nonrelevant and false indicationsA repeatable method to classify every indication before acceptance.
- Lesson 17: Written procedures and essential variablesProcedure content, requalification triggers and penetrant family rules.
- Lesson 18: ASME Section V Article 6 walkthroughThe paragraphs most tested, read and applied in order.
- Lesson 19: Acceptance criteria from referencing codesAppendix 8 linear and rounded rules worked through realistic cases.
- Lesson 20: Specific exam: castings, forgings and weldsManufacturing discontinuities and where each appears in pre-service work.
- Lesson 21: Specific exam: in-service cracking and contaminantsStress raisers, sulfur and halogen limits, and post-cleaning requirements.
- Lesson 22: Instruction Preparation: structure of a PT instructionSections an instruction needs, from scope to reporting, and their order.
- Lesson 23: Instruction Preparation: worked example and reviewBuild a complete instruction, then find the vague lines a grader rejects.
Keep going after the free lesson. Every topic gets its own lesson, plus the full question bank, timed simulations and study tools.
About the ASNT 9712 Level II PT exam
ASNT's ISO 9712-based Level II certification for liquid penetrant testing, requiring 5 days of training, 60 days of experience and four examination elements. The General exam covers PT principles, method selection, inspection and evaluation of indications, and procedures and standards. This prep covers only the three written elements, not the practical exam.
What's on the exam
Each branch is a topic in the official outline. Members see every key fact on the full mind map. Read the free study guide →
How to pass the ASNT 9712 Level II PT exam
- ASNT lists four General topics for PT and no percentage weights, so split your time evenly across principles, selection, evaluation and procedures.
- Know the ASME Section V Article 6 numbers and how each is triggered: 40 to 125 °F, dwell minimums by product form, and the 10 to 60 minute interpretation window.
- Each written element has its own 70% minimum. Treat the 1-hour Instruction Preparation element as a separate exam, not an afterthought.
- Learn the process order for each method by heart. Many questions turn on which step comes next or which step has been skipped.
Save your results and get your Readiness Score
Create a free account after the test: your score by topic, a mistakes bank, the complete study notes for the first topic, flashcards and the NDT Level III Formula Sheet.
What's in the premium ASNT 9712 Level II PT prep
Premium ASNT 9712 Level II PT prep is studied one topic at a time. Each step starts with that topic's key notes and flashcard deck, then its own question sets of 25, so you master one topic before you move to the next. When every topic is strong, the 6 full mock exams show you're ready.
Your step-by-step study path
- 1Review of PT Principles9 key notes, 115 flashcards, then 450 practice questions in 18 sets of 25Notes free with an account
- 2Selection of the Appropriate PT Method9 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25Premium
- 3PT Processing Steps and Materials9 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25Premium
- 4Inspection and Evaluation of Indications9 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25Premium
- 5Inspection Procedures and Standards8 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25Premium
- 6Specific Exam: Pre- and In-Service Applications8 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25Premium
- 7Instruction Preparation8 key notes, 110 flashcards, then 425 practice questions in 17 sets of 25Premium
- Final step: 6 full mock exams110 questions each, timed like test day. Pass them, then book your exam.Premium
Read the complete ASNT 9712 Level II PT study notes for “Review of PT Principles”
Our first full set of comprehensive notes, about 12 minutes of reading: What PT can and cannot do · Capillary action and wetting · Viscosity and temperature · Developer action · Fluorescent and visible penetrants, a worked exam example, the traps examiners use and a one-minute recap. Create a free account to read it and see how premium notes work before you decide.
Study tools included
3,000 practice questions
3,000 exam-style questions per exam, organized topic by topic in sets of 25. Every answer explained, with the rule it comes from.
6 full mock exams
6 full-length timed mock exams per exam, with real question counts and time limits, so test day feels like practice day.
Exam Readiness Score
One 0 to 100 number that tells you when you're ready to book. Reach 80 and you're covered by our Pass Guarantee.
800 flashcards + spaced repetition
800 flashcards per exam, in a deck for each topic, that come back right before you'd forget them. Five minutes a day keeps every number fresh.
60 comprehensive key notes
60 key notes per exam, split across its topics and each explained in full: the concepts, worked exam examples, the traps examiners use and a quick recap. Your first set is free with an account.
Mind maps
See the whole exam on one screen: every topic and the facts under it.
Sample questions with answers
These are the questions in the free test above, with answers. Try the test first. You'll learn more by getting some wrong.
1. A penetrant forms beaded droplets with a contact angle above 90° on a clean metal test surface. What does this show?
2. A new penetrant has the same wetting behavior as the one it replaces, but it is noticeably more viscous at the same temperature. What effect should be expected?
3. Turbine blades must be examined for very fine fatigue cracks, and a full water-wash processing line is available. Which option gives the highest sensitivity?
4. A field weld on a remote pipeline must be examined. There is no water or power, and only a few joints need testing. Which process best fits?
5. An aluminum casting was grit blasted and then penetrant tested. No indications appeared at a location that had failed a prior inspection. What is the most likely fix?
6. To save time after the dwell on a solvent-removable examination, a technician sprays cleaner straight onto the weld to clear the excess penetrant. Under ASME Section V Article 6, what should happen next?
7. A nonaqueous developer coat on a weld is dry at 09:20. Under ASME Section V Article 6, what is the standard period for final interpretation?
8. A part that has seen fatigue loading shows a straight line of closely spaced red dots at a fillet radius. What is the most likely cause?
9. Two indications of equal length are on the same weld, but one bleeds out much more widely and quickly. What is the most likely difference?
10. A suspected false indication appears on a part. How should the inspector verify it before making a judgment?
11. Under ASME Section VIII Division 1, Appendix 8, a weld has four 1/8 in rounded PT indications in a straight line, 1/32 in apart edge to edge. What is the result?
12. An ASME Section V Article 6 procedure uses the standard temperature range. The part surface is at 130 °F. What should be done?
13. A weld received a color contrast PT under ASME Section V Article 6. The client now wants fluorescent PT on the same weld. What is correct?
14. The penetrant materials for a nickel-base alloy weld must be certified under ASME Section V Article 6. Which contaminant has to be controlled for this alloy?
15. Which order is correct for a Level II to write in a solvent-removable PT instruction?
Get the full ASNT 9712 Level II PT prep
Premium Monthly
- One ASNT Level III exam of your choice: Basic, UT, RT or MT
- 3,000 practice questions + 6 full mock exams per exam
- 800 flashcards + 60 key notes per exam, by topic, plus mind maps
- Spaced repetition + mistakes bank
- Readiness Score & detailed reports
- Video lessons as they release
- Content updates during your access
- 5 bonuses: NDT formula sheet, discontinuity atlas, study planner and more
- Pass Guarantee: complete the prep, pass or 100% back
Renews monthly until you cancel. Cancel in two clicks from your account; you keep access until the end of the month you've paid for. No minimum term.
Premium Yearly
- One ASNT Level III exam of your choice: Basic, UT, RT or MT
- 3,000 practice questions + 6 full mock exams per exam
- 800 flashcards + 60 key notes per exam, by topic, plus mind maps
- Spaced repetition + mistakes bank
- Readiness Score & detailed reports
- Video lessons as they release
- Content updates during your access
- 5 bonuses: NDT formula sheet, discontinuity atlas, study planner and more
- Pass Guarantee: complete the prep, pass or 100% back
Renews once a year until you cancel. We email you before each renewal. Cancel any time from your account; you keep access until the end of the year you've paid for.
ASNT 9712 Level II PT exam FAQ
How many questions are on the ASNT 9712 Level II PT exam?
110 written items over three computer-based elements: General 50, Specific 40 (Pre- and In-Service) and Instruction Preparation 20. A practical exam (post-emulsifiable, solvent-removable or water-washable, 2 parts) is also required, with a time limit of 5 hours of written exams: general 2 hours, specific 2 hours, instruction preparation 1 hour. practicals add 1.5 hours (post-emulsifiable or water-washable) or 1 hour (solvent-removable) each. Format: computer-based with an on-screen calculator. asnt's candidate pages do not state the reference-material rules, so confirm them with asnt. instruction preparation uses multiple-choice and multiple-response items. this prep covers only the written parts, with 4-option practice items; it does not cover the hands-on practical exam.
What is the passing score for ASNT 9712 Level II PT?
At least 70% on each written element (General, Specific and Instruction Preparation) and at least 80% on each practical specimen.
How much does the ASNT 9712 Level II PT exam cost?
US$1,270 for ASNT members, US$1,345 for nonmembers (single technique); all techniques US$1,970 / US$2,085. Retakes: General or Specific US$415 / US$465, Instruction Preparation US$400 / US$455, practical US$500 / US$590. ASNT fees differ for members and nonmembers and can change, so confirm on the ASNT certification website before you apply.
Which languages is the ASNT 9712 Level II PT exam offered in?
English only (an online NDT terminology dictionary covers Korean, Mandarin, Spanish, UK English and Arabic).
Where do I take the ASNT 9712 Level II PT exam?
Written exams at Pearson VUE test centers or ASNT Authorized Exam Centers (computer-based); practical exams only at Authorized Exam Centers.
Is this ASNT 9712 Level II PT practice test free?
Yes. The 15-question practice test on this page is free, with an explanation for every answer and no signup. A free account also unlocks the complete study notes for the first topic. The full ASNT 9712 Level II PT prep is Premium at $147 a month for this exam.
What's in the premium ASNT 9712 Level II PT prep?
3,000 practice questions organized topic by topic (Review of PT Principles: 450; Selection of the Appropriate PT Method: 425; PT Processing Steps and Materials: 425; Inspection and Evaluation of Indications: 425; Inspection Procedures and Standards: 425; Specific Exam: Pre- and In-Service Applications: 425; Instruction Preparation: 425), 6 full-length timed mock exams of 110 questions, 800 flashcards and 60 comprehensive key notes split across all 7 topics, plus a mistakes bank and the Readiness Score.
Related practice tests
ASNT NDT Level II, Liquid Penetrant Testing (PT)
ASNT's third-party written certification for liquid penetrant technicians: a 50-item General exam and a 40-item Specific exam for the general industry or pressure equipment sector.
ASNT NDT Level II, Radiographic Testing (RT)
ASNT's third-party written certification for radiographic technicians: a 50-item General exam and a 40-item Specific exam for the general industry or pressure equipment sector.
ASNT NDT Level II, Ultrasonic Testing (UT)
ASNT's third-party written certification for ultrasonic technicians: a 50-item General exam and a 40-item Specific exam for the general industry or pressure equipment sector.
Exam details are summarized from the official candidate information available in October 2026. ASNT changes formats and fees, so confirm with ASNT Certification Services LLC (American Society for Nondestructive Testing) before you book. NDTLevel3Exam is not affiliated with ASNT or Pearson VUE.