Try the full study dashboard free, no signup: practice, flashcards and your Exam Readiness Score. Open it →
Home / Practice tests / RT Level III
ASNT NDT Level III · Last updated November 2026

ASNT NDT Level III Radiographic Testing (RT) Exam: free practice test

The ASNT Level III radiography exam. Since 18 August 2026 it follows a revised outline in four domains: RT principles and theory, equipment and materials, interpretation and evaluation, and safety and health standards. Expect exposure, decay and unsharpness calculations, image quality, interpretation and radiation safety.

Watch the free 4:23 video lesson: the key RT Level III concepts →

Premium: 3,000 practice questions, 6 full mock exams, 800 flashcards and 60 comprehensive key notes, topic by topic. See the study path ·

Or open the free RT Level III study dashboard: flashcards, notes and your Readiness Score, no signup →

About the RT Level III exam

The ASNT Level III radiography exam. Since 18 August 2026 it follows a revised outline in four domains: RT principles and theory, equipment and materials, interpretation and evaluation, and safety and health standards. Expect exposure, decay and unsharpness calculations, image quality, interpretation and radiation safety.

What's on the exam

RT Level III
Radiation Physics and Sources
6 key facts
Equipment, Film and Digital Detectors
6 key facts
Exposure Calculations and Geometry
6 key facts
Image Quality and Technique Development
6 key facts
Interpretation and Evaluation
6 key facts
Radiation Safety and Regulations
6 key facts
Codes, Procedures and RT Program Management
6 key facts

Each branch is a topic in the official outline. Members see every key fact on the full mind map. Read the free study guide →

How to pass the RT Level III exam

  • Exposure math is reliable points: inverse square law, source decay, exposure factor and geometric unsharpness. Practice them until each takes under a minute.
  • Know the isotopes cold: Ir-192 half-life about 74 days, Co-60 about 5.27 years, Se-75 about 120 days, and which steel thickness each suits.
  • The revised outline puts more weight on the Level III role: approving techniques, auditing film quality and radiation safety, and setting acceptance criteria when none exist.
  • Radiation safety questions use US NRC terms (radiation area, high radiation area, alarming ratemeters). Learn the definitions word for word.

Save your results and get your Readiness Score

Create a free account after the test: your score by topic, a mistakes bank, the complete study notes for the first topic, flashcards and the NDT Level III Formula Sheet.

Take the test first

What's in the premium RT Level III prep

Premium RT Level III prep is studied one topic at a time. Each step starts with that topic's key notes and flashcard deck, then its own question sets of 25, so you master one topic before you move to the next. When every topic is strong, the 6 full mock exams show you're ready.

3,000practice questions, every answer explained
6full-length mock exams, 135 questions each, timed
800flashcards with spaced repetition, sorted by topic
60comprehensive key notes across 7 topics

Your step-by-step study path

  1. 1
    Radiation Physics and Sources9 key notes, 115 flashcards, then 450 practice questions in 18 sets of 25
    Notes free with an account
  2. 2
    Equipment, Film and Digital Detectors9 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  3. 3
    Exposure Calculations and Geometry9 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  4. 4
    Image Quality and Technique Development9 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  5. 5
    Interpretation and Evaluation8 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  6. 6
    Radiation Safety and Regulations8 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  7. 7
    Codes, Procedures and RT Program Management8 key notes, 110 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  8. Final step: 6 full mock exams135 questions each, timed like test day. Pass them, then book your exam.
    Premium
Free with an account

Read the complete RT Level III study notes for “Radiation Physics and Sources”

Our first full set of comprehensive notes, about 15 minutes of reading: X-ray sources · Gamma sources · Decay calculations · Interaction with matter · Attenuation, HVL and TVL, a worked exam example, the traps examiners use and a one-minute recap. Create a free account to read it and see how premium notes work before you decide.

Open the free dashboard

Study tools included

3,000 practice questions

3,000 exam-style questions per exam, organized topic by topic in sets of 25. Every answer explained, with the rule it comes from.

6 full mock exams

6 full-length timed mock exams per exam, with real question counts and time limits, so test day feels like practice day.

Exam Readiness Score

One 0 to 100 number that tells you when you're ready to book. Reach 80 and you're covered by our Pass Guarantee.

800 flashcards + spaced repetition

800 flashcards per exam, in a deck for each topic, that come back right before you'd forget them. Five minutes a day keeps every number fresh.

60 comprehensive key notes

60 key notes per exam, split across its topics and each explained in full: the concepts, worked exam examples, the traps examiners use and a quick recap. Your first set is free with an account.

Mind maps

See the whole exam on one screen: every topic and the facts under it.

Sample questions with answers

These are the questions in the free test above, with answers. Try the test first. You'll learn more by getting some wrong.

1. An Ir-192 source (half-life 74 days) measures 100 Ci today. About what will its activity be in 148 days?
Answer: 25 Ci. 148 days is two half-lives: 100 → 50 → 25 Ci. In general A = A0 × (1/2)^(t ÷ T½). Exposure times must be increased as the source decays.
2. Which isotope emits the highest-energy gamma rays and is used for the thickest steel sections?
Answer: Cobalt-60. Co-60 emits gamma rays of 1.17 and 1.33 MeV, suited to thick steel. Ir-192 (about 0.2 to 0.6 MeV) covers mid-range thicknesses; Se-75 and Yb-169 have lower energies for thinner sections.
3. On an X-ray tube, raising the tube current (mA) while the kilovoltage stays the same:
Answer: Increases radiation intensity without changing its penetrating power. Tube current controls how many electrons hit the target, so it scales intensity. Kilovoltage controls the energy spectrum and therefore penetration and contrast.
4. In gamma radiography, front lead screens mainly:
Answer: Intensify the image by emitting electrons and absorb lower-energy scattered radiation. Lead screens give off electrons under high-energy radiation, which exposes the film (intensification), and they filter out softer scattered radiation that would reduce contrast. Fluorescent screens are the ones that emit light.
5. A technique is changed from a fast, coarse-grain film to a slower, fine-grain film at the same density. What happens?
Answer: Exposure time rises and definition improves. Finer-grain films are slower, so they need more exposure for the same density, but they give lower graininess and better definition and sensitivity.
6. An exposure takes 3.0 minutes at a 24 in source-to-film distance. What exposure is needed at 36 in, with everything else unchanged?
Answer: 6.75 minutes. New time = old time × (new distance ÷ old distance)² = 3.0 × (36 ÷ 24)² = 3.0 × 2.25 = 6.75 minutes.
7. Source size 3.0 mm, source-to-object distance 500 mm, object-to-film distance 40 mm. What is the geometric unsharpness?
Answer: 0.24 mm. Ug = F × t ÷ d = 3.0 × 40 ÷ 500 = 0.24 mm, where F is the source size, t the object-to-film distance and d the source-to-object distance.
8. A film area has a density of 2.0. What fraction of the incident light does it transmit?
Answer: 1%. Density D = log10 (I0 ÷ It). D = 2.0 means I0 ÷ It = 100, so 1% of the light is transmitted. Each extra 1.0 of density cuts transmitted light by a factor of 10.
9. On 20 mm thick steel, what does 2-2T sensitivity with an ASTM E1025 hole-type IQI require?
Answer: A 0.4 mm thick plaque with its 2T hole (0.8 mm) visible. The first number is plaque thickness as a percentage of part thickness (2% of 20 mm = 0.4 mm); 2T is the hole whose diameter is twice the plaque thickness (0.8 mm). That hole must be visible on the image.
10. Under ASME Section V Article 2, a double-wall, double-image technique (both walls viewed on one image) may be used for welds in components with a nominal outside diameter of:
Answer: 3½ in (89 mm) or less. ASME Section V permits double-wall viewing of both walls on the same image for components 3½ in (89 mm) or less in nominal OD. Larger pipe uses double-wall, single-image or single-wall techniques.
11. A film radiograph of a single-V butt weld shows a dark, straight, sharply defined line along the center of the weld root. What is it most likely to be?
Answer: Incomplete (inadequate) penetration. Incomplete penetration leaves an unfused root gap, which images as a dark straight line on the weld centerline. Lack of sidewall fusion runs along a fusion boundary, offset from the center; excess penetration is lighter, not darker.
12. Which weld discontinuity appears lighter (lower density) than the surrounding weld on a film radiograph?
Answer: Tungsten inclusion. Tungsten is much denser than steel and absorbs more radiation, so it shows as a bright, light spot. Porosity, slag and cracks absorb less than the weld metal and image darker.
13. Under US NRC 10 CFR Part 20, a 'high radiation area' is one where an individual could receive a dose greater than:
Answer: 100 mrem (1 mSv) in one hour at 30 cm from the source. Radiation area: more than 5 mrem (0.05 mSv) in 1 hour at 30 cm. High radiation area: more than 100 mrem (1 mSv) in 1 hour at 30 cm. Very high radiation area: more than 500 rad (5 Gy) in 1 hour at 1 m.
14. A survey meter reads 80 mR/h at 10 m from an unshielded gamma source. At about what distance will the rate drop to 2 mR/h?
Answer: 63 m. Inverse square law: d2 = d1 × √(I1 ÷ I2) = 10 × √(80 ÷ 2) = 10 × √40 ≈ 63 m. Halving the rate needs √2 times the distance, not twice.
15. Under ASME Section V Article 2, where may the IQI be placed when the source side of the part is not accessible?
Answer: On the film side, with a lead letter 'F' next to it. IQIs go on the source side. If that side is inaccessible, the IQI may go on the film (detector) side with a lead letter 'F' placed adjacent to it, so the reviewer knows its location.

Get the full RT Level III prep

Most popular · cancel anytime

Premium Monthly

$147/month
per exam
About $4.83 a day · less than a retake fee, for the certification that lets you approve procedures and certify technicians
  • One ASNT Level III exam of your choice: Basic, UT, RT or MT
  • 3,000 practice questions + 6 full mock exams per exam
  • 800 flashcards + 60 key notes per exam, by topic, plus mind maps
  • Spaced repetition + mistakes bank
  • Readiness Score & detailed reports
  • Video lessons as they release
  • Content updates during your access
  • 5 bonuses: NDT formula sheet, discontinuity atlas, study planner and more
  • Pass Guarantee: complete the prep, pass or 100% back

Renews monthly until you cancel. Cancel in two clicks from your account; you keep access until the end of the month you've paid for. No minimum term.

Best value · 3 months free

Premium Yearly

$1,323/year
per exam
Pay for 9 months, get 12. Save $441 against paying monthly.
  • One ASNT Level III exam of your choice: Basic, UT, RT or MT
  • 3,000 practice questions + 6 full mock exams per exam
  • 800 flashcards + 60 key notes per exam, by topic, plus mind maps
  • Spaced repetition + mistakes bank
  • Readiness Score & detailed reports
  • Video lessons as they release
  • Content updates during your access
  • 5 bonuses: NDT formula sheet, discontinuity atlas, study planner and more
  • Pass Guarantee: complete the prep, pass or 100% back

Renews once a year until you cancel. We email you before each renewal. Cancel any time from your account; you keep access until the end of the year you've paid for.

Pass Guarantee. Complete the full prep, sit your exam within 60 days, and if you don't pass we refund 100% of your subscription payments. See the requirements
Secure checkout by Stripe Card, Apple Pay, Google Pay Pass Guarantee

Certification guide

How to become an ASNT NDT Level III: ASNT NDT Level III is the credential for NDT professionals who write procedures, interpret codes, choose methods and train and certify technicians. It is issued by [ASNT Certification Services](https://certification.asnt.org/certification/asnt-ndt-level-iii) after you prove your education and Level II experience and pass the Basic exam plus at least one method exam. Here is the path, what it costs and how long it takes.

RT Level III exam FAQ

How many questions are on the RT Level III exam?

135 multiple-choice questions (some are unscored pretest items), with a time limit of 4 hours. Format: closed book, computer-based, with an on-screen calculator.

What is the passing score for RT Level III?

Not published per exam. Aim for 80% or higher in practice (ASNT says its criterion-referenced cut scores are typically 70% to 80%).

How much does the RT Level III exam cost?

US$545 for ASNT members, US$625 for nonmembers (retake US$475 / US$555). ASNT fees differ for members and nonmembers and can change, so confirm on the ASNT certification website before you apply.

Which languages is the RT Level III exam offered in?

English (an online NDT terminology translation dictionary is available).

Where do I take the RT Level III exam?

Pearson VUE test centers and ASNT Authorized Exam Centers (in person, computer-based).

Is this RT Level III practice test free?

Yes. The 15-question practice test on this page is free, with an explanation for every answer and no signup. A free account also unlocks the complete study notes for the first topic. The full RT Level III prep is Premium at $147 a month for this exam.

What's in the premium RT Level III prep?

3,000 practice questions organized topic by topic (Radiation Physics and Sources: 450; Equipment, Film and Digital Detectors: 425; Exposure Calculations and Geometry: 425; Image Quality and Technique Development: 425; Interpretation and Evaluation: 425; Radiation Safety and Regulations: 425; Codes, Procedures and RT Program Management: 425), 6 full-length timed mock exams of 135 questions, 800 flashcards and 60 comprehensive key notes split across all 7 topics, plus a mistakes bank and the Readiness Score.

Compare RT Level III with the other ASNT Level III exams

Related practice tests

Exam details are summarized from the official candidate information available in October 2026. ASNT changes formats and fees, so confirm with ASNT Certification Services LLC (American Society for Nondestructive Testing) before you book. NDTLevel3Exam is not affiliated with ASNT or Pearson VUE.

Start the free test