Try the full study dashboard free, no signup: practice, flashcards and your Exam Readiness Score. Open it →
Home / Practice tests / NRCan NDT Level 3
NRCan · Last updated November 2026

NRCan NDT Level 3 (CAN/CGSB-48.9712): free practice test

NRCan's Level 3 certification to CAN/CGSB-48.9712-2022 has a Basic paper common to all methods and sectors, a method General paper, an EMC Codes and Applications paper and a Written Procedure or Review. CGSB stopped operating on 1 April 2026, but NRCan certification continues unchanged. This prep covers only the written knowledge part; the practical exam is separate and is required if it was not passed at Level 2.

Watch the free 4:18 video lesson: the key NRCan NDT Level 3 concepts →

Premium: 3,000 practice questions, 6 full mock exams, 800 flashcards and 60 comprehensive key notes, topic by topic. See the study path ·

Or open the free NRCan NDT Level 3 study dashboard: flashcards, notes and your Readiness Score, no signup →

About the NRCan NDT Level 3 exam

NRCan's Level 3 certification to CAN/CGSB-48.9712-2022 has a Basic paper common to all methods and sectors, a method General paper, an EMC Codes and Applications paper and a Written Procedure or Review. CGSB stopped operating on 1 April 2026, but NRCan certification continues unchanged. This prep covers only the written knowledge part; the practical exam is separate and is required if it was not passed at Level 2.

What's on the exam

NRCan NDT Level 3
Materials and Manufacturing Processes
8 key facts
Discontinuities in Welds, Castings and Wrought Products
7 key facts
CAN/CGSB-48.9712 and NRCan Certification Rules
8 key facts
Other NDT Methods: PT, MT and VT
7 key facts
Other NDT Methods: RT, UT and ET
7 key facts
Method Theory: General Paper
7 key facts
EMC Codes and Applications Paper
6 key facts
Written Procedure and Procedure Review
6 key facts

Each branch is a topic in the official outline. Members see every key fact on the full mind map. Read the free study guide →

How to pass the NRCan NDT Level 3 exam

  • The Basic paper is 140 questions in 4 hours, about 1 minute 40 seconds each, and you need 70% on each part. A strong Part C cannot rescue a weak Part A or Part B.
  • Pick your 4 Part C methods early and study each to Level 2 depth. The Basic paper is common to all methods and sectors, so you need not repeat it for a later Level 3 method.
  • On the EMC paper, the 10 code questions are weighted (5 points each in the UT, MT, ET and VT guides, 4 points in the RT guide), so a missed code question costs far more than a missed application question.
  • You have 3 attempts at each element, and a re-examination application cannot be sent until 30 days after the last exam. After 3 failures on any element you retrain and redo all initial elements, so don't sit a paper before you are ready.

Save your results and get your Readiness Score

Create a free account after the test: your score by topic, a mistakes bank, the complete study notes for the first topic, flashcards and the NDT Level III Formula Sheet.

Take the test first

What's in the premium NRCan NDT Level 3 prep

Premium NRCan NDT Level 3 prep is studied one topic at a time. Each step starts with that topic's key notes and flashcard deck, then its own question sets of 25, so you master one topic before you move to the next. When every topic is strong, the 6 full mock exams show you're ready.

3,000practice questions, every answer explained
6full-length mock exams, 140 questions each, timed
800flashcards with spaced repetition, sorted by topic
60comprehensive key notes across 8 topics

Your step-by-step study path

  1. 1
    Materials and Manufacturing Processes8 key notes, 100 flashcards, then 375 practice questions in 15 sets of 25
    Notes free with an account
  2. 2
    Discontinuities in Welds, Castings and Wrought Products8 key notes, 100 flashcards, then 375 practice questions in 15 sets of 25
    Premium
  3. 3
    CAN/CGSB-48.9712 and NRCan Certification Rules8 key notes, 100 flashcards, then 375 practice questions in 15 sets of 25
    Premium
  4. 4
    Other NDT Methods: PT, MT and VT8 key notes, 100 flashcards, then 375 practice questions in 15 sets of 25
    Premium
  5. 5
    Other NDT Methods: RT, UT and ET7 key notes, 100 flashcards, then 375 practice questions in 15 sets of 25
    Premium
  6. 6
    Method Theory: General Paper7 key notes, 100 flashcards, then 375 practice questions in 15 sets of 25
    Premium
  7. 7
    EMC Codes and Applications Paper7 key notes, 100 flashcards, then 375 practice questions in 15 sets of 25
    Premium
  8. 8
    Written Procedure and Procedure Review7 key notes, 100 flashcards, then 375 practice questions in 15 sets of 25
    Premium
  9. Final step: 6 full mock exams140 questions each, timed like test day. Pass them, then book your exam.
    Premium
Free with an account

Read the complete NRCan NDT Level 3 study notes for “Materials and Manufacturing Processes”

Our first full set of comprehensive notes, about 15 minutes of reading: Steel structure · Heat treatments · Surface hardening and alloys · Primary processes and working · Welding metallurgy, a worked exam example, the traps examiners use and a one-minute recap. Create a free account to read it and see how premium notes work before you decide.

Open the free dashboard

Study tools included

3,000 practice questions

3,000 exam-style questions per exam, organized topic by topic in sets of 25. Every answer explained, with the rule it comes from.

6 full mock exams

6 full-length timed mock exams per exam, with real question counts and time limits, so test day feels like practice day.

Exam Readiness Score

One 0 to 100 number that tells you when you're ready to book. Reach 80 and you're covered by our Pass Guarantee.

800 flashcards + spaced repetition

800 flashcards per exam, in a deck for each topic, that come back right before you'd forget them. Five minutes a day keeps every number fresh.

60 comprehensive key notes

60 key notes per exam, split across its topics and each explained in full: the concepts, worked exam examples, the traps examiners use and a quick recap. Your first set is free with an account.

Mind maps

See the whole exam on one screen: every topic and the facts under it.

Sample questions with answers

These are the questions in the free test above, with answers. Try the test first. You'll learn more by getting some wrong.

1. A low-carbon steel strip has been heavily cold rolled and is now too hard to form further. The mill wants to restore ductility through recrystallization without heating into the austenite range. Which treatment fits?
Answer: Subcritical (process) annealing below the lower critical temperature. Subcritical annealing, also called process annealing, heats cold-worked steel below the lower critical temperature so that deformed ferrite recrystallizes and ductility returns. Normalizing and full annealing also soften or refine steel, but they heat into the austenite range, which the mill wants to avoid. Rule: cold-work recovery needs recrystallization, not a phase change.
2. A structural steel has 0.20% C, 1.20% Mn, 0.10% Cr, 0.05% Mo, 0.15% Ni and 0.15% Cu, with no vanadium. Using the IIW formula CE = C + Mn/6 + (Cr + Mo + V)/5 + (Ni + Cu)/15, what is its carbon equivalent?
Answer: 0.45. CE = 0.20 + 0.20 + 0.15/5 + 0.30/15 = 0.20 + 0.20 + 0.03 + 0.02 = 0.45. Leaving out the Ni and Cu term gives 0.43, and forgetting to divide the Cr group by 5 gives 0.57. Rule: a higher carbon equivalent means a harder heat-affected zone and a greater risk of hydrogen cracking, so preheat and low-hydrogen practice matter more.
3. A quenched and tempered steel plate is butt welded with electrodes left in damp storage. Visual and MT checks right after welding are clean, but MT two days later finds cracks in the heat-affected zone, running along the weld. What is the most likely cause?
Answer: Hydrogen-induced cold cracking in the hardened heat-affected zone. Hydrogen from damp electrodes, a hardened heat-affected zone and residual stress combine to cause cold cracking that can appear hours or days after welding, which explains the delay. Solidification cracks form at the weld centreline as the bead cools and would have been present at the first check. Rule: delayed HAZ cracks in hardenable steel point to hydrogen, so plan final NDT after a suitable hold time.
4. Ultrasonic testing of an extruded aluminum bar finds a central, elongated cavity, but only in the last length to leave the die. What is the most likely discontinuity?
Answer: Extrusion pipe drawn into the centre at the end of the stroke. Near the end of the stroke, metal from the billet surface and back end flows toward the centre and forms a funnel-shaped cavity called extrusion pipe, which is why the butt and the last length are discarded. A seam runs along the surface over the whole length, while forging bursts and cold shuts belong to forging and casting. Rule: tie each discontinuity to the process stage that creates it.
5. A candidate holds valid NRCan PT3 and UT2 certification, has no qualifying post-secondary education and applies for UT3. With NRCan's additional-method reduction, what minimum UT industrial experience must be shown for UT3, on top of Level 2?
Answer: 337.5 days (2,362.5 hours). UT3 with Level 2 and no higher education needs 450 days. NRCan gives a 25% reduction to a candidate actively certified at Level 3 in another method, so 450 x 0.75 = 337.5 days. The 270-day figure applies only with qualifying higher education. Rule: check the method group, then the education route, then the additional-method reduction.
6. A UT3 candidate passes the Basic and General papers but fails the EMC Codes and Applications paper at the first attempt and at both re-examinations. What does NRCan require next?
Answer: Complete new UT Level 3 training and redo all initial exam elements. NRCan allows three attempts at any element. After two failed re-examinations, the candidate must complete the method and level training course again, update the vision report if it has lapsed and redo all initial examination elements, including those already passed. The 30-day wait and the CAD 140 fee apply only to an allowed re-examination. Rule: three attempts per element, then restart.
7. A ferromagnetic tube of 80 mm outside diameter is centred on a conductor carrying 800 A. What is the tangential magnetic field at the outer surface of the tube?
Answer: 3.2 kA/m. H = I ÷ (2πr) = 800 ÷ (2π x 0.040 m) = 3,183 A/m, about 3.2 kA/m. Using the diameter in place of the radius gives 1.6 kA/m. Rule: the radius is the distance from the conductor centre to the surface being tested, and the Level 3 compares the result with the tangential field the procedure requires.
8. An inspector measures equal legs of 8 mm on a flat-faced 90° fillet weld. The drawing requires a minimum theoretical throat of 6 mm. What is the correct finding?
Answer: Reject: the theoretical throat is about 5.7 mm. For an equal-leg 90° fillet, the theoretical throat is leg x 0.707, so 8 x 0.707 = 5.66 mm, which is below the 6 mm minimum. The leg is not the throat, and multiplying by root 2 gives the hypotenuse across the toes. Rule: a leg of about 8.5 mm would be needed for a 6 mm throat, so always convert before judging.
9. A 12 mm carbon steel butt weld is to be radiographed in the field with a gamma source. Image contrast is the priority and exposure time is not. Which of these isotopes is the best choice?
Answer: Selenium-75. Of these sources, selenium-75 emits the lowest photon energies, mostly below 0.4 MeV, so it gives the best contrast on thin steel. Iridium-192 is usable at this thickness but gives lower contrast, and the higher-energy cesium-137 and cobalt-60 suit much thicker sections. Rule: choose the lowest energy that still penetrates in a practical exposure time.
10. A surface eddy current probe on thick aluminum has a standard depth of penetration of 0.5 mm at the test frequency. About what fraction of the surface current density remains at a depth of 1.0 mm?
Answer: About 14%. Current density falls exponentially with depth as e^(-x/δ). Here x/δ = 1.0 ÷ 0.5 = 2, so e^-2 = 0.135, about 14%. The 37% figure is the value at one standard depth, and 5% is the value at three. Rule: at two standard depths little current remains, so lower the frequency to reach deeper flaws.
11. On a 100 mm steel block, in the far field, the first and second back-wall echoes differ by 9 dB. Of this, 6 dB is due to beam spread over the doubled path. What is the attenuation in dB per mm of sound path?
Answer: 0.015 dB/mm. Subtract the beam-spread loss: 9 - 6 = 3 dB of material attenuation. The extra sound path between the two echoes is down and back, 200 mm, so 3 ÷ 200 = 0.015 dB/mm. Dividing by the 100 mm thickness gives 0.030, which is the classic error. Rule: remove divergence first, then divide by the extra sound path, not the thickness.
12. Cobalt-60 gamma rays (1.17 and 1.33 MeV) pass through a thick steel section. Which interaction accounts for most of the attenuation?
Answer: Compton scattering. At about 1 MeV in steel, Compton scattering dominates, which is why scatter control matters for cobalt-60 work. Photoelectric absorption dominates at low energy, while pair production needs more than 1.02 MeV and contributes little at cobalt-60 energies in steel. Rule: photoelectric at low energy, Compton in the middle, pair production at high energy.
13. A 30 mm austenitic stainless steel butt weld gives a noisy, skewed response with 4 MHz shear-wave angle probes. Which technique change is most appropriate for detecting planar flaws in the weld?
Answer: Dual-element refracted longitudinal-wave probes at about 2 MHz. Columnar austenitic weld grains scatter and skew shear waves strongly. Lower-frequency longitudinal waves are far less affected, and dual-element refracted probes concentrate the useful sound at the depth of interest. Raising the frequency only adds scatter. Rule: for austenitic weld metal, go longitudinal and lower in frequency, then prove sensitivity on a representative block.
14. A specification extract says: record every indication above 50% DAC, and reject any indication above 100% DAC that is longer than 10 mm. A weld indication peaks 4 dB above the 50% DAC level and is 14 mm long. What is the correct disposition?
Answer: Record it and accept it: the peak is about 79% DAC. 50% DAC is 6 dB below DAC, so a peak 4 dB above it is 2 dB below DAC, or about 79% DAC. It exceeds the recording level, but it does not reach DAC, so the length limit is not triggered. Rule: convert every level to dB relative to DAC first, then apply the criteria in the order the code gives them.
15. In a procedure review, a magnetic particle procedure specifies an AC yoke lift test, wet fluorescent particles and a full report format, and its scope lists carbon steel and Type 316 stainless steel welds. Which entry is a technical deficiency to mark?
Answer: Type 316 stainless steel listed within the scope of the method. Type 316 is austenitic and essentially non-magnetic, so magnetic particle testing cannot be applied to it, which makes that scope entry technically wrong. The yoke lift test, the fluorescent particles and a complete report format are all good practice. Rule: in a review, check technical content against the physics of the method as well as format, signatures and references.

Get the full NRCan NDT Level 3 prep

Most popular · cancel anytime

Premium Monthly

$147/month
per exam
About $4.83 a day · less than a retake fee, for the certification that lets you approve procedures and certify technicians
  • One ASNT Level III exam of your choice: Basic, UT, RT or MT
  • 3,000 practice questions + 6 full mock exams per exam
  • 800 flashcards + 60 key notes per exam, by topic, plus mind maps
  • Spaced repetition + mistakes bank
  • Readiness Score & detailed reports
  • Video lessons as they release
  • Content updates during your access
  • 5 bonuses: NDT formula sheet, discontinuity atlas, study planner and more
  • Pass Guarantee: complete the prep, pass or 100% back

Renews monthly until you cancel. Cancel in two clicks from your account; you keep access until the end of the month you've paid for. No minimum term.

Best value · 3 months free

Premium Yearly

$1,323/year
per exam
Pay for 9 months, get 12. Save $441 against paying monthly.
  • One ASNT Level III exam of your choice: Basic, UT, RT or MT
  • 3,000 practice questions + 6 full mock exams per exam
  • 800 flashcards + 60 key notes per exam, by topic, plus mind maps
  • Spaced repetition + mistakes bank
  • Readiness Score & detailed reports
  • Video lessons as they release
  • Content updates during your access
  • 5 bonuses: NDT formula sheet, discontinuity atlas, study planner and more
  • Pass Guarantee: complete the prep, pass or 100% back

Renews once a year until you cancel. We email you before each renewal. Cancel any time from your account; you keep access until the end of the year you've paid for.

Pass Guarantee. Complete the full prep, sit your exam within 60 days, and if you don't pass we refund 100% of your subscription payments. See the requirements
Secure checkout by Stripe Card, Apple Pay, Google Pay Pass Guarantee

NRCan NDT Level 3 exam FAQ

How many questions are on the NRCan NDT Level 3 exam?

Basic paper 140 multiple-choice questions (Part A 70 on materials, processes and discontinuities; Part B 10 on the standard; Part C 60 on 4 methods you choose, 15 each). General paper 30. EMC Codes and Applications paper 40 (10 code questions plus 30 application questions). Plus one Written Procedure or Procedure Review, with a time limit of basic 4 hours; general 1 hour; emc codes and applications 2 hours; written procedure 4 hours, or procedure review 1.5 hours for each additional level 3 method. rt also has a 1-hour radiation protection paper if not completed at level 1 or 2. Format: the real papers are multiple choice, except the written procedure or review, which is a written task. bring a non-programmable scientific calculator with no internet connectivity. nrcan does not publish whether references are supplied in the written multiple-choice papers; confirm with nrcan. this prep covers only the written knowledge papers, with 4-option single-best-answer practice items; it does not cover the practical exam (required if not passed at level 2) or grade your written procedure.

What is the passing score for NRCan NDT Level 3?

At least 70% on each of Basic Parts A, B and C, and at least 70% on each of the General, EMC Codes and Applications, and Written Procedure or Review papers.

How much does the NRCan NDT Level 3 exam cost?

CAD 525 application, plus CAD 140 registration per written paper (Basic, General, EMC, Written Procedure or Review), plus CAD 125 recommended exam centre fee for each online paper and CAD 95 for the paper-based procedure: CAD 1,555 for a first Level 3 method, where the practical was passed at Level 2. RT adds CAD 115 and CAD 125 if Radiation Protection is needed. Re-examination registration is CAD 140 per paper. ASNT fees differ for members and nonmembers and can change, so confirm on the ASNT certification website before you apply.

Which languages is the NRCan NDT Level 3 exam offered in?

Not published for the exam papers. NRCan's website and guides are available in English and French; confirm your exam language with NRCan.

Where do I take the NRCan NDT Level 3 exam?

NRCan online exam system, in-person live proctored at authorized examination centres in Canada. The Written Procedure or Review is paper-based at an authorized centre.

Is this NRCan NDT Level 3 practice test free?

Yes. The 15-question practice test on this page is free, with an explanation for every answer and no signup. A free account also unlocks the complete study notes for the first topic. The full NRCan NDT Level 3 prep is Premium at $147 a month for this exam.

What's in the premium NRCan NDT Level 3 prep?

3,000 practice questions organized topic by topic (Materials and Manufacturing Processes: 375; Discontinuities in Welds, Castings and Wrought Products: 375; CAN/CGSB-48.9712 and NRCan Certification Rules: 375; Other NDT Methods: PT, MT and VT: 375; Other NDT Methods: RT, UT and ET: 375; Method Theory: General Paper: 375; EMC Codes and Applications Paper: 375; Written Procedure and Procedure Review: 375), 6 full-length timed mock exams of 140 questions, 800 flashcards and 60 comprehensive key notes split across all 8 topics, plus a mistakes bank and the Readiness Score.

Related practice tests

Exam details are summarized from the official candidate information available in October 2026. ASNT changes formats and fees, so confirm with Natural Resources Canada (NRCan) National Non-Destructive Testing Certification Body (NDTCB) before you book. NDTLevel3Exam is not affiliated with ASNT or Pearson VUE.

Start the free test