Try the full study dashboard free, no signup: practice, flashcards and your Exam Readiness Score. Open it →
Home / Practice tests / ASNT NDT Level II VT
ASNT · Last updated November 2026

ASNT NDT Level II, Visual Testing (VT): free practice test

ASNT's third-party Level II certification for visual testing, made up of a 50-item General exam and at least one 40-item Specific exam, each 2 hours. VT topics were revised for exams after 18 October 2026 and now cover principles, equipment, techniques, results, codes and safety. Applicants need 4 days of training and 30 days of VT experience (58 days in NDT). This prep covers only the written exams, not the employer's vision and practical exams.

Watch the free 4:20 video lesson: the key ASNT NDT Level II VT concepts →

Premium: 3,000 practice questions, 6 full mock exams, 800 flashcards and 60 comprehensive key notes, topic by topic. See the study path ·

Or open the free ASNT NDT Level II VT study dashboard: flashcards, notes and your Readiness Score, no signup →

About the ASNT NDT Level II VT exam

ASNT's third-party Level II certification for visual testing, made up of a 50-item General exam and at least one 40-item Specific exam, each 2 hours. VT topics were revised for exams after 18 October 2026 and now cover principles, equipment, techniques, results, codes and safety. Applicants need 4 days of training and 30 days of VT experience (58 days in NDT). This prep covers only the written exams, not the employer's vision and practical exams.

What's on the exam

ASNT NDT Level II VT
VT Principles and Theory
8 key facts
VT Equipment and Materials
7 key facts
VT Techniques and Surface Preparation
7 key facts
Interpreting, Evaluating and Documenting Results
7 key facts
Codes, Standards, Specifications and Procedures
6 key facts
Safety and Health Standards
6 key facts
Specific Exam: Codes, Applications and Techniques
7 key facts

Each branch is a topic in the official outline. Members see every key fact on the full mind map. Read the free study guide →

How to pass the ASNT NDT Level II VT exam

  • Study the revised VT topics in effect since 18 October 2026. Older study lists are organized around vision, lighting and optics, which now sit inside a broader job-task outline.
  • ASNT publishes topic lists but no percentage weights for Level II, so give all six General domains time, including safety and work instructions.
  • Each exam gives 2 hours, so General allows 2.4 minutes per item and Specific 3 minutes. Spend the extra Specific time checking each answer against the exact wording of the code or procedure.
  • Practice the short calculations by hand: inverse square law, magnifier power, footcandle to lux conversion and comparison sizing on a video image.

Save your results and get your Readiness Score

Create a free account after the test: your score by topic, a mistakes bank, the complete study notes for the first topic, flashcards and the NDT Level III Formula Sheet.

Take the test first

What's in the premium ASNT NDT Level II VT prep

Premium ASNT NDT Level II VT prep is studied one topic at a time. Each step starts with that topic's key notes and flashcard deck, then its own question sets of 25, so you master one topic before you move to the next. When every topic is strong, the 6 full mock exams show you're ready.

3,000practice questions, every answer explained
6full-length mock exams, 90 questions each, timed
800flashcards with spaced repetition, sorted by topic
60comprehensive key notes across 7 topics

Your step-by-step study path

  1. 1
    VT Principles and Theory9 key notes, 115 flashcards, then 450 practice questions in 18 sets of 25
    Notes free with an account
  2. 2
    VT Equipment and Materials9 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  3. 3
    VT Techniques and Surface Preparation9 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  4. 4
    Interpreting, Evaluating and Documenting Results9 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  5. 5
    Codes, Standards, Specifications and Procedures8 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  6. 6
    Safety and Health Standards8 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  7. 7
    Specific Exam: Codes, Applications and Techniques8 key notes, 110 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  8. Final step: 6 full mock exams90 questions each, timed like test day. Pass them, then book your exam.
    Premium
Free with an account

Read the complete ASNT NDT Level II VT study notes for “VT Principles and Theory”

Our first full set of comprehensive notes, about 12 minutes of reading: What VT can and cannot do · The eye and vision · Light and contrast · Magnification · Oversight of VT personnel, a worked exam example, the traps examiners use and a one-minute recap. Create a free account to read it and see how premium notes work before you decide.

Open the free dashboard

Study tools included

3,000 practice questions

3,000 exam-style questions per exam, organized topic by topic in sets of 25. Every answer explained, with the rule it comes from.

6 full mock exams

6 full-length timed mock exams per exam, with real question counts and time limits, so test day feels like practice day.

Exam Readiness Score

One 0 to 100 number that tells you when you're ready to book. Reach 80 and you're covered by our Pass Guarantee.

800 flashcards + spaced repetition

800 flashcards per exam, in a deck for each topic, that come back right before you'd forget them. Five minutes a day keeps every number fresh.

60 comprehensive key notes

60 key notes per exam, split across its topics and each explained in full: the concepts, worked exam examples, the traps examiners use and a quick recap. Your first set is free with an account.

Mind maps

See the whole exam on one screen: every topic and the facts under it.

Sample questions with answers

These are the questions in the free test above, with answers. Try the test first. You'll learn more by getting some wrong.

1. A portable lamp gives 800 fc on a weld when held 1 ft from it. A scaffold forces the inspector to hold it 4 ft away. Treating the lamp as a point source, what is the illuminance at the weld, and is the ASME Section V Article 9 minimum met?
Answer: 50 fc, so the minimum is not met. Illuminance falls with the square of distance: 800 ÷ 4² = 50 fc, below the Article 9 minimum of 100 fc (1,000 lx). Dividing by 4 gives 200 fc, the error of treating the fall-off as linear. Move the lamp closer or add light, then verify with a calibrated meter at the surface.
2. An inspector replaces a 3X magnifier with a 10X magnifier to study a suspected crack at a weld toe. Compared with the 3X lens, what happens to the view?
Answer: Field of view and depth of field both shrink. Raising magnification narrows the area seen and reduces the range of distances in focus, so the lens must be held steadier and closer to correct focus. Many candidates assume depth of field improves with power, but it does not. Scan at low power and use high power only to study a located indication.
3. Bright, even overhead light shows nothing on a machined plate, but a shallow dent is suspected. Which lighting change is most likely to reveal it?
Answer: Directing a light at a low angle across the surface. Low-angle (oblique) light casts shadows from small changes in surface height, which raises the contrast of dents and ridges. Light from directly overhead or from many directions flattens those shadows. Reducing light overall takes the surface below the level needed for reliable detail.
4. While a fiberscope is moved along a tube, a fixed pattern of small black dots stays in the same screen positions. What is the most likely cause?
Answer: Broken fibers in the image bundle. Each fiber carries one image point, so a broken fiber shows as a black dot that stays still while the scene moves. Real wall pitting would move across the screen as the tip moves. Note the dots and have the instrument checked, since many broken fibers reduce resolution.
5. A dial caliper with a stated tolerance of ±0.002 in reads 1.004 in on a 1.000 in gage block during a daily check. What should the inspector do?
Answer: Tag it out and review work since the last good check. A reading outside tolerance means the tool has failed verification. It must be removed from use, and the measurements made since its last good check must be reviewed. An informal correction or re-zero leaves the fault unexplained and any prior results unverified.
6. Under ASME Section V Article 9, an inspector doing direct visual examination is viewing a weld from 30 in at a 45° angle to the surface. What must change?
Answer: Move the eye to within 24 in of the surface. Direct visual examination under Article 9 needs the eye within 24 in (600 mm) of the surface at an angle of at least 30°. The 45° angle is fine but 30 in is too far. Mirrors can improve the angle, but a magnifier does not replace the distance limit unless it is part of a qualified remote technique.
7. A Type 316 stainless steel weld must be cleaned of light slag before visual examination. Which cleaning tool choice is best?
Answer: A stainless steel brush kept only for stainless steel work. A dedicated stainless steel brush removes slag without leaving iron that can later cause rust staining and corrosion on the stainless surface. Peening and grinding can hide or remove the very surface features under examination. Preparation should clean the surface without altering it.
8. On a videoscope image, a 0.250 in reference washer lying next to an indication appears 1.00 in wide on the screen. The indication, in the same plane and at the same distance, appears 2.50 in long. What is its estimated length?
Answer: 0.625 in. Comparison sizing uses the reference to set the scale: 0.250 in ÷ 1.00 in = 0.250 in per screen inch, so 2.50 × 0.250 = 0.625 in. It is valid only when the reference and the indication are in the same plane at the same distance, because working distance changes the image scale.
9. On a steel casting, a smooth-edged, wavy line appears where two streams of molten metal met during pouring. What is it most likely to be?
Answer: A cold shut. A cold shut forms when two metal fronts meet without fully fusing, leaving a smooth, often wavy surface line. Hot tears are jagged cracks in zones that were restrained during solidification. Laps come from forging and lack of fusion comes from welding, so the product form rules them out.
10. A VT report for an ASME Section V Article 9 examination lists the date, part number, results and examiner's name. Which required item is missing?
Answer: The procedure identification and revision. Article 9 reports must identify the procedure and its revision, along with the date, the technique, the results, the examiner and the part examined, so the work can be traced and repeated. Commercial details are not part of the examination record, and a procedure may add environmental data if it requires them.
11. On site, a supervisor asks a Level II to drop the procedure's minimum light from 100 fc to 50 fc so a job can finish on time. What should the Level II do?
Answer: Keep the 100 fc limit unless the procedure is formally revised. A Level II works to the written procedure and cannot relax a stated requirement on the job. A decrease in lighting is an essential variable under Article 9, so the procedure would need requalification and formal revision by those responsible for it. A verbal agreement or a report note does not change the procedure.
12. When a visual procedure is demonstrated under ASME Section V Article 9, a fine line can be used as the test condition. What is the widest such line that can be used?
Answer: 1/32 in (0.8 mm). Article 9 allows the procedure to be demonstrated by resolving a fine line 1/32 in (0.8 mm) wide or less, under the most difficult viewing conditions of the job. A wider line proves less about the procedure's ability to resolve small detail. Article 9 also allows an artificial flaw or simulated condition.
13. A confined-space check before a tank inspection shows 18.5% oxygen. Under OSHA confined-space rules, what should the inspector do?
Answer: Stay out until the air is corrected and retested. OSHA's permit-required confined space rule treats oxygen below 19.5% as a hazardous atmosphere, so entry waits until ventilation brings the reading into range and a retest confirms it. A dust mask supplies no oxygen, and an attendant does not make the atmosphere safe.
14. Under the AWS D1.1 visual acceptance criteria, a 36 in groove weld in 1/2 in plate on a statically loaded nontubular connection has 1/16 in deep undercut over an accumulated 3 in of one 12 in length. What is the result?
Answer: Reject: that depth is limited to 2 in in any 12 in. For material under 1 in thick, D1.1 limits undercut to 1/32 in, with an allowance of up to 1/16 in for an accumulated 2 in in any 12 in. Here 3 in exceeds that allowance. The 2025 edition added rules for welds shorter than 12 in, which do not apply to this 36 in weld. Always check the edition the contract invokes.
15. During an internal inspection of a carbon steel pressure vessel, the inspector finds a group of pits near an inlet nozzle. What is the correct next step for a Level II?
Answer: Measure pit depth with a pit gauge and report it. Corrosion pits are evaluated by measured depth and extent against the applicable in-service code, so the Level II measures and reports them as the procedure requires. Grinding first destroys the evidence. Accepting or rejecting by appearance alone skips the measurement that the evaluation depends on.

Get the full ASNT NDT Level II VT prep

Most popular · cancel anytime

Premium Monthly

$147/month
per exam
About $4.83 a day · less than a retake fee, for the certification that lets you approve procedures and certify technicians
  • One ASNT Level III exam of your choice: Basic, UT, RT or MT
  • 3,000 practice questions + 6 full mock exams per exam
  • 800 flashcards + 60 key notes per exam, by topic, plus mind maps
  • Spaced repetition + mistakes bank
  • Readiness Score & detailed reports
  • Video lessons as they release
  • Content updates during your access
  • 5 bonuses: NDT formula sheet, discontinuity atlas, study planner and more
  • Pass Guarantee: complete the prep, pass or 100% back

Renews monthly until you cancel. Cancel in two clicks from your account; you keep access until the end of the month you've paid for. No minimum term.

Best value · 3 months free

Premium Yearly

$1,323/year
per exam
Pay for 9 months, get 12. Save $441 against paying monthly.
  • One ASNT Level III exam of your choice: Basic, UT, RT or MT
  • 3,000 practice questions + 6 full mock exams per exam
  • 800 flashcards + 60 key notes per exam, by topic, plus mind maps
  • Spaced repetition + mistakes bank
  • Readiness Score & detailed reports
  • Video lessons as they release
  • Content updates during your access
  • 5 bonuses: NDT formula sheet, discontinuity atlas, study planner and more
  • Pass Guarantee: complete the prep, pass or 100% back

Renews once a year until you cancel. We email you before each renewal. Cancel any time from your account; you keep access until the end of the year you've paid for.

Pass Guarantee. Complete the full prep, sit your exam within 60 days, and if you don't pass we refund 100% of your subscription payments. See the requirements
Secure checkout by Stripe Card, Apple Pay, Google Pay Pass Guarantee

ASNT NDT Level II VT exam FAQ

How many questions are on the ASNT NDT Level II VT exam?

90 multiple-choice questions over two exams: General 50 and Specific 40 (General Industry or Pressure Equipment sector). ASNT forms can include unscored pretest items, with a time limit of 4 hours in total: 2 hours for the general exam and 2 hours for the specific exam. Format: computer-based with an on-screen calculator. asnt's exam pages do not state the reference-material rules, so confirm them with asnt. this prep covers only the written general and specific exams; visual acuity, practical and job-specific exams are carried out by the employer.

What is the passing score for ASNT NDT Level II VT?

Not published for this program (the program document says exams are graded by accepted psychometric principles). ASNT says its exams are typically in the 70% to 80% range; aim for 80% or higher in practice and confirm with ASNT.

How much does the ASNT NDT Level II VT exam cost?

US$740 for ASNT members, US$820 for nonmembers (General plus one Specific); sector add-on or retake US$370 / US$410. ASNT fees differ for members and nonmembers and can change, so confirm on the ASNT certification website before you apply.

Which languages is the ASNT NDT Level II VT exam offered in?

English only (an online NDT terminology dictionary covers Korean, Mandarin, Spanish, UK English and Arabic).

Where do I take the ASNT NDT Level II VT exam?

Pearson VUE test centers and ASNT Authorized Exam Centers (in person, computer-based, no walk-ins).

Is this ASNT NDT Level II VT practice test free?

Yes. The 15-question practice test on this page is free, with an explanation for every answer and no signup. A free account also unlocks the complete study notes for the first topic. The full ASNT NDT Level II VT prep is Premium at $147 a month for this exam.

What's in the premium ASNT NDT Level II VT prep?

3,000 practice questions organized topic by topic (VT Principles and Theory: 450; VT Equipment and Materials: 425; VT Techniques and Surface Preparation: 425; Interpreting, Evaluating and Documenting Results: 425; Codes, Standards, Specifications and Procedures: 425; Safety and Health Standards: 425; Specific Exam: Codes, Applications and Techniques: 425), 6 full-length timed mock exams of 90 questions, 800 flashcards and 60 comprehensive key notes split across all 7 topics, plus a mistakes bank and the Readiness Score.

Related practice tests

Exam details are summarized from the official candidate information available in October 2026. ASNT changes formats and fees, so confirm with ASNT Certification Services LLC (American Society for Nondestructive Testing) before you book. NDTLevel3Exam is not affiliated with ASNT or Pearson VUE.

Start the free test