ASNT NDT Level III Electromagnetic Testing (ET): free practice test
The ASNT Level III electromagnetic testing method exam: 135 questions in 4 hours. Exams from 9 January 2027 follow a new six-domain outline: principles and theory, equipment and materials, interpreting and documenting results, codes and procedures, training and certification programs, and techniques and calibrations. Exams before that date use the older outline of eddy current, remote field and ACFM topics; this prep covers both.
Watch the free 4:34 video lesson: the key ASNT NDT Level III ET concepts →
Premium: 3,000 practice questions, 6 full mock exams, 800 flashcards and 60 comprehensive key notes, topic by topic. See the study path ·
- Lesson 2: Electromagnetic induction and the impedance planeHow eddy currents change coil resistance and inductive reactance, plotted point by point.
- Lesson 3: Standard depth of penetration calculationsWorked depth, frequency and percent IACS problems in exam-style units.
- Lesson 4: Phase lag and signal rotationWhy deeper flaws rotate signals and how phase calibration curves are built.
- Lesson 5: Conductivity, permeability and the characteristic frequencyMaterial variables, the limit frequency ratio and their impedance-plane loci.
- Lesson 6: Lift-off, fill factor and edge effectCoupling variables, how they distort signals and how to suppress them.
- Lesson 7: Magnetic saturation and demagnetizationDC saturation for ferromagnetic parts and reversing decreasing field demagnetization.
- Lesson 8: Probability of detection studiesReading POD curves and the meaning of a90/95 for flaw sizing.
- Lesson 9: Instruments, displays and multifrequency mixingAnalog and digital instruments, filters, channel mixing and support-plate suppression.
- Lesson 10: Probe types: surface, encircling, bobbin and arrayChoosing probes by part geometry, access and flaw orientation.
- Lesson 11: Absolute, differential, bridge and reflection coilsCoil configurations, their signal shapes and where each one fails.
- Lesson 12: Cables, scanners and equipment qualificationCable effects, scanner choice and evaluating contractor equipment capability.
- Lesson 13: Designing reference standardsMaterial matching, EDM notches, flat-bottom holes and documenting artificial flaws.
- Lesson 14: Frequency selection and technique validationBalancing penetration and sensitivity, then proving the technique on standards.
- Lesson 15: Conductivity and coating thickness measurementPercent IACS sorting, heat damage checks and lift-off coating gauging.
- Lesson 16: Remote field testing of ferromagnetic tubingDirect and indirect zones, spacing, signal phase and wall-loss sizing.
- Lesson 17: ACFM on welds and subsea structuresBx and Bz traces, butterfly plots and crack length and depth sizing.
- Lesson 18: Pulsed, saturation and magnetically biased eddy currentCorrosion under insulation screening and testing partially magnetic tubes.
- Lesson 19: Relevant versus nonrelevant indicationsSeparating flaws from wobble, dents, deposits, supports and permeability changes.
- Lesson 20: Tubing data analysis and reportingPhase-depth curves, trending between outages, second analyst review and report content.
- Lesson 21: ASME Section V Article 8 and ASTM standardsTubing examination requirements, E1004, E2096 and E2261 in practice.
- Lesson 22: Writing and reviewing ET proceduresEssential variables, calibration checks, acceptance criteria and client requirement reviews.
- Lesson 23: ET training, OJT and examination programsSNT-TC-1A written practices, practical specimens, item statistics and recertification.
Keep going after the free lesson. Every topic gets its own lesson, plus the full question bank, timed simulations and study tools.
About the ASNT NDT Level III ET exam
The ASNT Level III electromagnetic testing method exam: 135 questions in 4 hours. Exams from 9 January 2027 follow a new six-domain outline: principles and theory, equipment and materials, interpreting and documenting results, codes and procedures, training and certification programs, and techniques and calibrations. Exams before that date use the older outline of eddy current, remote field and ACFM topics; this prep covers both.
What's on the exam
Each branch is a topic in the official outline. Members see every key fact on the full mind map. Read the free study guide →
How to pass the ASNT NDT Level III ET exam
- 135 questions in 4 hours is about 107 seconds each. Standard depth, fill factor and frequency calculations should take under a minute.
- Check your exam date: before 9 January 2027 the outline lists eddy current, remote field testing and ACFM separately; from that date ASNT uses six task-based domains.
- Learn standard depth both ways: δ = 1 ÷ √(πfμσ), and in practice δ (mm) ≈ 660 ÷ √(f × %IACS × μr). Frequency scales with 1 ÷ δ².
- The new outline adds Level III program duties (training, exams, OJT) and equipment selection, so expect judgment questions as well as physics.
Save your results and get your Readiness Score
Create a free account after the test: your score by topic, a mistakes bank, the complete study notes for the first topic, flashcards and the NDT Level III Formula Sheet.
What's in the premium ASNT NDT Level III ET prep
Premium ASNT NDT Level III ET prep is studied one topic at a time. Each step starts with that topic's key notes and flashcard deck, then its own question sets of 25, so you master one topic before you move to the next. When every topic is strong, the 6 full mock exams show you're ready.
Your step-by-step study path
- 1ET Principles and Theory9 key notes, 115 flashcards, then 450 practice questions in 18 sets of 25Notes free with an account
- 2ET Equipment, Probes and Accessories9 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25Premium
- 3Techniques, Reference Standards and Calibration9 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25Premium
- 4RFT, ACFM and Other Electromagnetic Techniques9 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25Premium
- 5Interpreting, Evaluating and Documenting Results8 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25Premium
- 6Codes, Standards, Specifications and Procedures8 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25Premium
- 7ET Training and Certification Programs8 key notes, 110 flashcards, then 425 practice questions in 17 sets of 25Premium
- Final step: 6 full mock exams135 questions each, timed like test day. Pass them, then book your exam.Premium
Read the complete ASNT NDT Level III ET study notes for “ET Principles and Theory”
Our first full set of comprehensive notes, about 15 minutes of reading: Induction and impedance · Skin effect and standard depth · Variables that change the signal · Ferromagnetic materials, demagnetization and POD, a worked exam example, the traps examiners use and a one-minute recap. Create a free account to read it and see how premium notes work before you decide.
Study tools included
3,000 practice questions
3,000 exam-style questions per exam, organized topic by topic in sets of 25. Every answer explained, with the rule it comes from.
6 full mock exams
6 full-length timed mock exams per exam, with real question counts and time limits, so test day feels like practice day.
Exam Readiness Score
One 0 to 100 number that tells you when you're ready to book. Reach 80 and you're covered by our Pass Guarantee.
800 flashcards + spaced repetition
800 flashcards per exam, in a deck for each topic, that come back right before you'd forget them. Five minutes a day keeps every number fresh.
60 comprehensive key notes
60 key notes per exam, split across its topics and each explained in full: the concepts, worked exam examples, the traps examiners use and a quick recap. Your first set is free with an account.
Mind maps
See the whole exam on one screen: every topic and the facts under it.
Sample questions with answers
These are the questions in the free test above, with answers. Try the test first. You'll learn more by getting some wrong.
1. A nonmagnetic aluminum alloy has a conductivity of 30% IACS. About what test frequency gives a standard depth of penetration of 2 mm, using δ (mm) ≈ 660 ÷ √(f × %IACS)?
2. At a depth of three standard depths in a thick conductor, about what are the eddy current density, as a share of the surface value, and the phase lag?
3. Ferritic stainless steel tubes were examined using DC magnetic saturation and now hold residual magnetism that disturbs later machining. Which demagnetization approach should the Level III specify?
4. A bobbin probe of 0.540 in diameter is used in a tube with an inside diameter of 0.620 in. About what is the fill factor?
5. Heat exchanger tubes are expected to show long, gradual general wall thinning rather than short pits. Which coil arrangement responds best to that condition?
6. During bobbin coil examination of nonferromagnetic tubing, signals from carbon steel support plates hide small flaws at the supports. Which technique best suppresses the support plate signal?
7. A surface probe scanning near the edge of an aluminum part gives a large signal that masks cracks close to the edge. What is the best technique change?
8. Cracks must be found in the second layer of an aluminum lap joint under a 0.040 in skin, around steel fasteners. Which approach is most suitable?
9. Carbon steel boiler feedwater heater tubes must be examined from the inside for both ID and OD wall loss, with similar sensitivity to each and no saturation equipment. Which technique fits best?
10. In an ACFM scan along a fillet weld toe, which signal feature marks the two ends of a surface-breaking crack?
11. Conductivity checks on a 2024-T3 aluminum skin panel near a past fire show readings clearly outside the range expected for that temper, while the rest of the panel reads normally. What is the most likely interpretation?
12. On a surface crack examination, an indication appears with the same phase angle as the lift-off signal set during calibration. What is it most likely to be?
13. A contractor's procedure for bobbin examination of admiralty brass tubes uses a calibration standard made from stainless steel tube of the same size. What should the Level III do in reviewing it?
14. During tubing examination, the end-of-shift calibration check shows system response has shifted beyond the procedure's tolerance. What is required?
15. A Level III is preparing a practical examination for Level II eddy current technicians who will inspect heat exchanger tubing. What should the test specimens contain?
Get the full ASNT NDT Level III ET prep
Premium Monthly
- One ASNT Level III exam of your choice: Basic, UT, RT or MT
- 3,000 practice questions + 6 full mock exams per exam
- 800 flashcards + 60 key notes per exam, by topic, plus mind maps
- Spaced repetition + mistakes bank
- Readiness Score & detailed reports
- Video lessons as they release
- Content updates during your access
- 5 bonuses: NDT formula sheet, discontinuity atlas, study planner and more
- Pass Guarantee: complete the prep, pass or 100% back
Renews monthly until you cancel. Cancel in two clicks from your account; you keep access until the end of the month you've paid for. No minimum term.
Premium Yearly
- One ASNT Level III exam of your choice: Basic, UT, RT or MT
- 3,000 practice questions + 6 full mock exams per exam
- 800 flashcards + 60 key notes per exam, by topic, plus mind maps
- Spaced repetition + mistakes bank
- Readiness Score & detailed reports
- Video lessons as they release
- Content updates during your access
- 5 bonuses: NDT formula sheet, discontinuity atlas, study planner and more
- Pass Guarantee: complete the prep, pass or 100% back
Renews once a year until you cancel. We email you before each renewal. Cancel any time from your account; you keep access until the end of the year you've paid for.
ASNT NDT Level III ET exam FAQ
How many questions are on the ASNT NDT Level III ET exam?
135 multiple-choice questions (some are unscored pretest items), with a time limit of 4 hours. Format: computer-based multiple choice with an on-screen calculator. asnt does not publish reference-material rules on its exam page; confirm with asnt. certification also needs the ndt level iii basic exam.
What is the passing score for ASNT NDT Level III ET?
Not published per exam. ASNT sets criterion-referenced cut scores (Angoff or IRT) and says its exams are typically in the 70% to 80% range; aim for 80% or higher in practice.
How much does the ASNT NDT Level III ET exam cost?
US$545 for ASNT members, US$625 for nonmembers (retake US$475 / US$555). ASNT fees differ for members and nonmembers and can change, so confirm on the ASNT certification website before you apply.
Which languages is the ASNT NDT Level III ET exam offered in?
English only (an online NDT terminology dictionary covers Korean, Mandarin, Spanish, UK English and Arabic).
Where do I take the ASNT NDT Level III ET exam?
Pearson VUE test centers and ASNT Authorized Exam Centers (in person, computer-based); no practical exam.
Is this ASNT NDT Level III ET practice test free?
Yes. The 15-question practice test on this page is free, with an explanation for every answer and no signup. A free account also unlocks the complete study notes for the first topic. The full ASNT NDT Level III ET prep is Premium at $147 a month for this exam.
What's in the premium ASNT NDT Level III ET prep?
3,000 practice questions organized topic by topic (ET Principles and Theory: 450; ET Equipment, Probes and Accessories: 425; Techniques, Reference Standards and Calibration: 425; RFT, ACFM and Other Electromagnetic Techniques: 425; Interpreting, Evaluating and Documenting Results: 425; Codes, Standards, Specifications and Procedures: 425; ET Training and Certification Programs: 425), 6 full-length timed mock exams of 135 questions, 800 flashcards and 60 comprehensive key notes split across all 7 topics, plus a mistakes bank and the Readiness Score.
Related practice tests
ASNT NDT Level II, Liquid Penetrant Testing (PT)
ASNT's third-party written certification for liquid penetrant technicians: a 50-item General exam and a 40-item Specific exam for the general industry or pressure equipment sector.
ASNT NDT Level II, Radiographic Testing (RT)
ASNT's third-party written certification for radiographic technicians: a 50-item General exam and a 40-item Specific exam for the general industry or pressure equipment sector.
ASNT NDT Level II, Ultrasonic Testing (UT)
ASNT's third-party written certification for ultrasonic technicians: a 50-item General exam and a 40-item Specific exam for the general industry or pressure equipment sector.
Exam details are summarized from the official candidate information available in October 2026. ASNT changes formats and fees, so confirm with ASNT Certification Services LLC (American Society for Nondestructive Testing) before you book. NDTLevel3Exam is not affiliated with ASNT or Pearson VUE.