ASNT NDT Level III ET Exam Study Guide (2026)
Everything the ASNT NDT Level III Electromagnetic Testing (ET) tests, topic by topic: what each section covers, the facts that come up most, and how to study it. Pair it with the free 15-question practice test.
The exam at a glance
| Questions | 135 multiple-choice questions (some are unscored pretest items) |
|---|---|
| Time | 4 hours |
| Passing score | Not published per exam. ASNT sets criterion-referenced cut scores (Angoff or IRT) and says its exams are typically in the 70% to 80% range; aim for 80% or higher in practice |
| Format | Computer-based multiple choice with an on-screen calculator. ASNT does not publish reference-material rules on its exam page; confirm with ASNT. Certification also needs the NDT Level III Basic exam |
| Certifying body | ASNT Certification Services LLC (American Society for Nondestructive Testing) |
| Test provider | Pearson VUE test centers and ASNT Authorized Exam Centers (in person, computer-based); no practical exam |
Mind map: the whole exam on one screen
Read the complete ASNT NDT Level III ET study notes for “ET Principles and Theory”
Our first full set of comprehensive notes, about 15 minutes of reading: Induction and impedance · Skin effect and standard depth · Variables that change the signal · Ferromagnetic materials, demagnetization and POD, a worked exam example, the traps examiners use and a one-minute recap. Create a free account to read it and see how premium notes work before you decide.
1. ET Principles and Theory
Domain 1 of ASNT's ET outline from 9 January 2027 (and eddy current principles in the earlier outline): induction, impedance, skin effect, and the material and coupling variables, plus demagnetization and POD studies. ASNT does not publish domain weights.
Key facts
- An AC coil induces eddy currents in a conductor; their secondary field opposes the primary and changes the coil impedance (resistance and inductive reactance).
- Standard depth δ = 1 ÷ √(πfμσ). In practice δ (mm) ≈ 660 ÷ √(f × %IACS × μr), with f in Hz. Halving δ needs four times the frequency.
- Current density falls as e^(-x/δ): 37% at 1δ, about 14% at 2δ and 5% at 3δ. Phase lag is x/δ radians: 57° at 1δ.
- Variables that change impedance: conductivity, permeability, frequency, geometry, lift-off or fill factor, and discontinuities.
- Ferromagnetic materials have high and variable permeability, which masks flaw signals; DC magnetic saturation suppresses it, and parts are then demagnetized with a reversing, decreasing field.
- Eddy currents flow parallel to the coil windings, so flaws parallel to the current flow (and to the surface, such as laminations) are hard to detect.
- Probability of detection (POD) studies relate flaw size to detection rate; a90/95 is the flaw size detected 90% of the time with 95% confidence.
Flashcards
Exam tip: Most ET physics questions are one formula. Write δ and its frequency dependence on your scratch paper at the start.
2. ET Equipment, Probes and Accessories
Domain 2 of the new outline: selecting instruments, probes, cables and scanners and evaluating equipment and contractor capability.
Key facts
- Probe types: surface (pancake, pencil), encircling (OD) coils, internal bobbin coils, and arrays of many coils for C-scan imaging.
- Absolute coils respond to gradual changes; differential coils cancel slow changes and highlight small, abrupt flaws.
- Bridge (impedance) probes use the same coil to drive and sense; reflection (driver-pickup) probes use separate coils and give a wider frequency range and better subsurface response.
- Fill factor for encircling coils is (part diameter ÷ coil diameter)²; for internal probes, (probe diameter ÷ tube ID)².
- Shielded probes limit the field spread, reducing edge effect and fastener interference.
- Instruments display signals on the impedance plane; multifrequency instruments allow channel mixing.
- Cable length and type affect probe impedance and noise; change cables only if the procedure allows and recalibrate.
Flashcards
Exam tip: Pick the probe by flaw shape: abrupt flaws suit differential coils; gradual changes suit absolute coils.
3. Techniques, Reference Standards and Calibration
Domain 6 of the new outline: designing and selecting reference standards, choosing and validating techniques, and standardizing equipment.
Key facts
- Reference standards must match the test material's conductivity, permeability and nominal size, with artificial flaws (EDM notches, drilled or flat-bottom holes, grooves) of known size.
- Frequency choice balances penetration against sensitivity: high frequency for surface cracks, low frequency for subsurface layers and thick sections.
- Phase is set so lift-off appears in a fixed direction (usually horizontal) and flaw signals rotate away from it.
- Multifrequency mixing removes unwanted signals such as support plates, deposits or probe wobble.
- Edge effect is controlled with shielded probes and scan paths at constant distance from the edge.
- Conductivity measurement uses standards traceable in %IACS; coating thickness on nonferrous metals uses the lift-off effect.
- Calibration is checked at the start, at intervals set by the procedure and at the end; failure means re-examining everything since the last good check.
Flashcards
Exam tip: When asked how to improve detection, check frequency first, probe second and signal processing third.
Test yourself on these topics
Take the free 15-question ASNT NDT Level III ET test, then save your results to unlock your Readiness Score and the mistakes bank.
4. RFT, ACFM and Other Electromagnetic Techniques
Remote field testing and alternating current field measurement are listed separately in the outline for exams before 9 January 2027 and remain ET techniques under the new outline; pulsed eddy current and arrays round out the toolset.
Key facts
- RFT uses a low-frequency exciter and a detector about two to three tube diameters away, in the remote field zone.
- The RFT field passes through the tube wall twice, so ID and OD wall loss give similar responses in ferromagnetic tubes.
Flashcards
Exam tip: Choose the technique from the material and access: ferromagnetic tubes favor RFT, coated ferritic welds favor ACFM.
5. Interpreting, Evaluating and Documenting Results
Domain 3 of the new outline: managing inspection operations, reviewing results, separating relevant from nonrelevant indications and reporting.
Key facts
- Relevant indications come from discontinuities; nonrelevant ones come from lift-off, wobble, geometry, supports, deposits, dents or permeability changes.
- A signal along the lift-off phase is from probe spacing, not a flaw.
Flashcards
Exam tip: Always ask what else could cause the signal before calling it a flaw: lift-off, geometry and material changes come first.
6. Codes, Standards, Specifications and Procedures
Domain 4 of the new outline: reviewing client requirements, interpreting codes, developing and reviewing procedures and applying acceptance criteria.
Key facts
- ASME Section V Article 8 covers eddy current examination of tubular products and other applications in its appendices.
- Article 8 tubing standards must be made from the same material specification and nominal size as the tubes examined.
Flashcards
Exam tip: In procedure review questions, look for anything that changes the eddy current response: material, size, frequency, probe.
7. ET Training and Certification Programs
Domain 5 of the new outline: managing ET personnel and OJT, developing training, writing and administering exams and assessing exam quality.
Key facts
- Under SNT-TC-1A, the employer's written practice, approved by its NDT Level III, sets training, experience, exams and certification.
- Level I and II qualification uses general, specific and practical exams; SNT-TC-1A recommends at least 70% on each and an 80% composite when equally weighted.
Flashcards
Exam tip: Program questions reward the documented, objective and traceable choice.
How to pass
- 135 questions in 4 hours is about 107 seconds each. Standard depth, fill factor and frequency calculations should take under a minute.
- Check your exam date: before 9 January 2027 the outline lists eddy current, remote field testing and ACFM separately; from that date ASNT uses six task-based domains.
- Learn standard depth both ways: δ = 1 ÷ √(πfμσ), and in practice δ (mm) ≈ 660 ÷ √(f × %IACS × μr). Frequency scales with 1 ÷ δ².
- The new outline adds Level III program duties (training, exams, OJT) and equipment selection, so expect judgment questions as well as physics.
Frequently asked questions
How long should I study for the ASNT NDT Level III ET exam?
Most working candidates need 4 to 8 weeks at 45 to 60 minutes a day. Book your exam once your Readiness Score has stayed at 80 or higher for about a week.
Can I take the ASNT NDT Level III ET exam online?
No. ASNT NDT Level III exams are taken in person, on a computer, at Pearson VUE test centers or ASNT Authorized Exam Centers. Format: computer-based multiple choice with an on-screen calculator. asnt does not publish reference-material rules on its exam page; confirm with asnt. certification also needs the ndt level iii basic exam. Check ASNT's current exam information for the rules.
What score do I need to pass the ASNT NDT Level III ET exam?
Not published per exam. ASNT sets criterion-referenced cut scores (Angoff or IRT) and says its exams are typically in the 70% to 80% range; aim for 80% or higher in practice. The exam has 135 multiple-choice questions (some are unscored pretest items) and a time limit of 4 hours.
What are the most tested topics?
The outline covers et principles and theory, et equipment, probes and accessories, techniques, reference standards and calibration, rft, acfm and other electromagnetic techniques, interpreting, evaluating and documenting results, codes, standards, specifications and procedures, et training and certification programs. Use the free practice test to see which ones you need most.
The premium ASNT NDT Level III ET study path
Premium ASNT NDT Level III ET prep is studied one topic at a time. Each step starts with that topic's key notes and flashcard deck, then its own question sets of 25, so you master one topic before you move to the next. When every topic is strong, the 6 full mock exams show you're ready.
Your step-by-step study path
- 1ET Principles and Theory9 key notes, 115 flashcards, then 450 practice questions in 18 sets of 25Notes free with an account
- 2ET Equipment, Probes and Accessories9 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25Premium
- 3Techniques, Reference Standards and Calibration9 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25Premium
- 4RFT, ACFM and Other Electromagnetic Techniques9 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25Premium
- 5Interpreting, Evaluating and Documenting Results8 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25Premium
- 6Codes, Standards, Specifications and Procedures8 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25Premium
- 7ET Training and Certification Programs8 key notes, 110 flashcards, then 425 practice questions in 17 sets of 25Premium
- Final step: 6 full mock exams135 questions each, timed like test day. Pass them, then book your exam.Premium
Get every note, flashcard and question
Premium Monthly
- One ASNT Level III exam of your choice: Basic, UT, RT or MT
- 3,000 practice questions + 6 full mock exams per exam
- 800 flashcards + 60 key notes per exam, by topic, plus mind maps
- Spaced repetition + mistakes bank
- Readiness Score & detailed reports
- Video lessons as they release
- Content updates during your access
- 5 bonuses: NDT formula sheet, discontinuity atlas, study planner and more
- Pass Guarantee: complete the prep, pass or 100% back
Renews monthly until you cancel. Cancel in two clicks from your account; you keep access until the end of the month you've paid for. No minimum term.
Premium Yearly
- One ASNT Level III exam of your choice: Basic, UT, RT or MT
- 3,000 practice questions + 6 full mock exams per exam
- 800 flashcards + 60 key notes per exam, by topic, plus mind maps
- Spaced repetition + mistakes bank
- Readiness Score & detailed reports
- Video lessons as they release
- Content updates during your access
- 5 bonuses: NDT formula sheet, discontinuity atlas, study planner and more
- Pass Guarantee: complete the prep, pass or 100% back
Renews once a year until you cancel. We email you before each renewal. Cancel any time from your account; you keep access until the end of the year you've paid for.
Summarized from ASNT's official candidate information and the rules cited, checked October 2026. Confirm current requirements with ASNT Certification Services LLC (American Society for Nondestructive Testing).