Try the full study dashboard free, no signup: practice, flashcards and your Exam Readiness Score. Open it →
Home / Practice tests / ASNT 9712 Level II RT
ASNT · Last updated November 2026

ASNT 9712 Level II, Radiographic Testing (RT), written parts: free practice test

ASNT's ISO 9712-based Level II certification for radiographic testing, requiring 15 days of training (in addition to radiation safety training), 180 days of experience and passing all examination elements. Three written elements sit alongside gamma or X-ray practicals and a 20-image film interpretation. This prep covers only the written General, Specific and Instruction Preparation elements, not the practical exams.

Watch the free 4:25 video lesson: the key ASNT 9712 Level II RT concepts →

Premium: 3,000 practice questions, 6 full mock exams, 800 flashcards and 60 comprehensive key notes, topic by topic. See the study path ·

Or open the free ASNT 9712 Level II RT study dashboard: flashcards, notes and your Readiness Score, no signup →

About the ASNT 9712 Level II RT exam

ASNT's ISO 9712-based Level II certification for radiographic testing, requiring 15 days of training (in addition to radiation safety training), 180 days of experience and passing all examination elements. Three written elements sit alongside gamma or X-ray practicals and a 20-image film interpretation. This prep covers only the written General, Specific and Instruction Preparation elements, not the practical exams.

What's on the exam

ASNT 9712 Level II RT
Review of Basic Radiographic Principles
8 key facts
Darkroom Facilities, Techniques and Processing
7 key facts
Indications, Discontinuities and Defects
7 key facts
Manufacturing Processes and Associated Discontinuities
7 key facts
Radiological Safety Principles Review
7 key facts
Specific Exam: Pre- and In-Service Applications
7 key facts
Instruction Preparation
6 key facts

Each branch is a topic in the official outline. Members see every key fact on the full mind map. Read the free study guide →

How to pass the ASNT 9712 Level II RT exam

  • Each written element has its own 70% minimum, so a strong General score can't offset a weak Specific or Instruction Preparation result.
  • Two of the five General topics are about film work: darkroom processing and how discontinuities look. Know artifacts as well as you know weld flaws, since both have to be told apart on film.
  • Instruction Preparation is 20 items in 1 hour, and the detailed test instructions carry 40% of its weighting. Practice stating kV, mA, exposure time, source-to-film distance and film type outright.
  • Keep exposure arithmetic quick: inverse square, milliampere-minutes or curie-minutes, film speed from log exposure and geometric unsharpness. ASNT supplies the calculator, so review its guide before test day.

Save your results and get your Readiness Score

Create a free account after the test: your score by topic, a mistakes bank, the complete study notes for the first topic, flashcards and the NDT Level III Formula Sheet.

Take the test first

What's in the premium ASNT 9712 Level II RT prep

Premium ASNT 9712 Level II RT prep is studied one topic at a time. Each step starts with that topic's key notes and flashcard deck, then its own question sets of 25, so you master one topic before you move to the next. When every topic is strong, the 6 full mock exams show you're ready.

3,000practice questions, every answer explained
6full-length mock exams, 110 questions each, timed
800flashcards with spaced repetition, sorted by topic
60comprehensive key notes across 7 topics

Your step-by-step study path

  1. 1
    Review of Basic Radiographic Principles9 key notes, 115 flashcards, then 450 practice questions in 18 sets of 25
    Notes free with an account
  2. 2
    Darkroom Facilities, Techniques and Processing9 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  3. 3
    Indications, Discontinuities and Defects9 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  4. 4
    Manufacturing Processes and Associated Discontinuities9 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  5. 5
    Radiological Safety Principles Review8 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  6. 6
    Specific Exam: Pre- and In-Service Applications8 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  7. 7
    Instruction Preparation8 key notes, 110 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  8. Final step: 6 full mock exams110 questions each, timed like test day. Pass them, then book your exam.
    Premium
Free with an account

Read the complete ASNT 9712 Level II RT study notes for “Review of Basic Radiographic Principles”

Our first full set of comprehensive notes, about 14 minutes of reading: Sources of radiation · Interaction with the part · Exposure relationships · Contrast and definition · Controlling scatter, a worked exam example, the traps examiners use and a one-minute recap. Create a free account to read it and see how premium notes work before you decide.

Open the free dashboard

Study tools included

3,000 practice questions

3,000 exam-style questions per exam, organized topic by topic in sets of 25. Every answer explained, with the rule it comes from.

6 full mock exams

6 full-length timed mock exams per exam, with real question counts and time limits, so test day feels like practice day.

Exam Readiness Score

One 0 to 100 number that tells you when you're ready to book. Reach 80 and you're covered by our Pass Guarantee.

800 flashcards + spaced repetition

800 flashcards per exam, in a deck for each topic, that come back right before you'd forget them. Five minutes a day keeps every number fresh.

60 comprehensive key notes

60 key notes per exam, split across its topics and each explained in full: the concepts, worked exam examples, the traps examiners use and a quick recap. Your first set is free with an account.

Mind maps

See the whole exam on one screen: every topic and the facts under it.

Sample questions with answers

These are the questions in the free test above, with answers. Try the test first. You'll learn more by getting some wrong.

1. A technique uses a 40 Ci Ir-192 source for 3 minutes at a 24 in source-to-film distance. The same part is now shot with the source at 20 Ci and a 48 in distance. What exposure time gives the same film density?
Answer: 24 minutes. Exposure scales with curies times minutes divided by distance squared, so the time is 3 × (40/20) × (48/24)² = 3 × 2 × 4 = 24 minutes. Stopping at 12 minutes means the distance was treated as a linear change. Half the activity doubles the time, and double the distance quadruples it.
2. On the same log-exposure scale, Film X reaches density 2.0 at log relative exposure 1.60 and Film Y reaches density 2.0 at 1.90. Film X needs 5 minutes. About how long does Film Y need?
Answer: 10 minutes. The difference is 0.30 in log exposure, and the antilog of 0.30 is about 2, so Film Y needs about twice the exposure: 10 minutes. Multiplying the time by 3 misreads the 0.30 as a linear factor. Film Y sits further right on the scale, so it is the slower film.
3. Which setup gives the lowest geometric unsharpness?
Answer: 0.120 in source, 0.50 in object-to-film, 12 in source-to-object. Ug = Fd/D gives 0.0067, 0.0050, 0.0067 and 0.0075 in. The 0.120 in source wins despite not being the smallest, because its object-to-film distance is short. Always work the ratio, since a small source alone doesn't guarantee a sharp image.
4. A flat plate is radiographed with its edges unsupported, and the plate edges on the film appear fogged, with loss of edge detail. What is the most effective correction?
Answer: Mask the edges with lead strips or lead shot. Radiation passing beside the plate scatters from the cassette and undercuts the edges, a side-scatter effect that masking stops at its origin. A smaller focal spot improves geometric sharpness but has no effect on scatter. Longer development or faster film makes fog worse rather than reducing it.
5. A film clears in 3 minutes in today's fixer. Using the usual rule for fixing time, how long should the film stay in the fixer?
Answer: 6 minutes. Clearing time is when the undeveloped emulsion goes transparent, and the rule of thumb is to fix for at least twice that, here 6 minutes, so the silver compounds become fully soluble. Removing the film the moment it looks clear leaves a poorly fixed image. A rising clearing time also tells you the fixer is becoming exhausted.
6. A film went straight from a warm developer into a much colder wash, and the dried film has a netlike, leathery surface pattern. What is this artifact?
Answer: Reticulation. A sharp temperature difference between solutions makes the swollen emulsion wrinkle into a net pattern called reticulation. Static marks are dark tree-shaped or dotted branches, and pressure marks follow where the film was bent or pressed. Keep all processing solutions close to the same temperature.
7. A multi-pass butt weld shows two roughly parallel, irregular dark lines running along the edges of the root pass. Visual examination finds no undercut. What is the most likely indication?
Answer: Slag lines along the root pass (wagon tracks). Slag trapped along the two edges of a root or early pass forms parallel lines called wagon tracks. Incomplete penetration usually gives a single, straight dark line at the center of the root. Undercut is ruled out because it would be visible at the surface.
8. A single-V weld has a 30° bevel measured from the plate normal. A beam normal to the plate shows nothing, but sidewall lack of fusion is suspected along the bevel. What change best improves detection?
Answer: Angle the beam about 30° to run along the bevel face. Planar flaws show only when the beam runs nearly parallel to them, so that the flaw presents its full depth to the film. Aligning the beam with the bevel face does this. Stronger sources, more distance or faster film don't change the orientation problem, so a tight planar flaw can stay invisible.
9. A steel casting film shows a smooth, dark line with rounded ends in a thin section, at a point where two streams of metal met. There is no branching. What is the most likely discontinuity?
Answer: Cold shut. A cold shut forms when two streams of metal meet without fusing, and the film shows a smooth-edged dark line. A hot tear is ragged and branching, usually at a change of section. Porosity gives rounded spots, and sand gives irregular grainy patches rather than a clean line.
10. A casting film shows a dark, spongy, feathery area with no distinct outline, in the heavy region that freezes last. What is the most likely discontinuity?
Answer: Microshrinkage or sponge shrinkage. Metal contracting as it solidifies, without enough feed from the riser, leaves a spongy or feathery void in the last region to freeze. Gas holes are round and smooth-walled, and hot tears are ragged lines. Location in the casting is often the deciding clue, so ask which area froze last.
11. A radiographer has 3.8 rem total effective dose equivalent recorded so far this year, and a job will deliver an average of 80 mrem/h. How many hours of this work reach the 5 rem annual limit in 10 CFR 20.1201?
Answer: 15 hours. The remaining margin is 5,000 - 3,800 = 1,200 mrem, and 1,200 / 80 = 15 hours. Dividing the 5 rem limit by the rate ignores dose already received, and dividing the 3.8 rem by the rate answers the wrong question. Employers normally set lower administrative limits than this.
12. A radiographer gives the Radiation Safety Officer a written declaration of pregnancy. What limit then applies to the dose to the embryo/fetus under 10 CFR 20.1208?
Answer: 0.5 rem over the entire pregnancy. Once pregnancy is declared in writing, the embryo/fetus limit is 0.5 rem (5 mSv) for the entire pregnancy, with efforts to avoid large variations in the monthly rate. It is a total for the pregnancy, not a monthly allowance. The 5 rem figure is the adult annual occupational limit.
13. A gamma radiograph is viewed as a single film under ASME Section V Article 2. The densitometer reads 1.90 through the body of the hole-type IQI. What is the correct disposition?
Answer: Reject, since it is below the gamma minimum after tolerance. Article 2 sets a minimum of 2.0 for single-film gamma viewing and 1.8 for X-ray, with a 0.05 tolerance for densitometer variation. A reading of 1.90 is below even 1.95, so the film fails. Readings are taken through the IQI body or next to the designated wire, not averaged with the area of interest.
14. A weld in a 1.50 in thick section is fully radiographed under ASME Section VIII Division 1 UW-51. The film shows one elongated slag indication 0.60 in long, with no others nearby. What is the disposition?
Answer: Reject, since it exceeds the limit of t/3, or 0.50 in. For thickness over 3/4 in up to 2 1/4 in, UW-51 limits an elongated indication to one-third of t, which is 0.50 in here, so 0.60 in fails. The 3/4 in cap applies only above 2 1/4 in, and 1/4 in applies to sections up to 3/4 in. Cracks and incomplete fusion or penetration are rejected at any length.
15. In a written RT instruction, which section should state the kV, mA, exposure time and source-to-film distance?
Answer: Detailed instruction, including settings. ASNT's weighting table places settings in the detailed instruction section, which carries 40% of the Instruction Preparation grade. The foreword covers scope and references, personnel covers who may do the work, and reporting covers what is issued afterward. A Level I needs the settings stated outright rather than left to judgment.

Get the full ASNT 9712 Level II RT prep

Most popular · cancel anytime

Premium Monthly

$147/month
per exam
About $4.83 a day · less than a retake fee, for the certification that lets you approve procedures and certify technicians
  • One ASNT Level III exam of your choice: Basic, UT, RT or MT
  • 3,000 practice questions + 6 full mock exams per exam
  • 800 flashcards + 60 key notes per exam, by topic, plus mind maps
  • Spaced repetition + mistakes bank
  • Readiness Score & detailed reports
  • Video lessons as they release
  • Content updates during your access
  • 5 bonuses: NDT formula sheet, discontinuity atlas, study planner and more
  • Pass Guarantee: complete the prep, pass or 100% back

Renews monthly until you cancel. Cancel in two clicks from your account; you keep access until the end of the month you've paid for. No minimum term.

Best value · 3 months free

Premium Yearly

$1,323/year
per exam
Pay for 9 months, get 12. Save $441 against paying monthly.
  • One ASNT Level III exam of your choice: Basic, UT, RT or MT
  • 3,000 practice questions + 6 full mock exams per exam
  • 800 flashcards + 60 key notes per exam, by topic, plus mind maps
  • Spaced repetition + mistakes bank
  • Readiness Score & detailed reports
  • Video lessons as they release
  • Content updates during your access
  • 5 bonuses: NDT formula sheet, discontinuity atlas, study planner and more
  • Pass Guarantee: complete the prep, pass or 100% back

Renews once a year until you cancel. We email you before each renewal. Cancel any time from your account; you keep access until the end of the year you've paid for.

Pass Guarantee. Complete the full prep, sit your exam within 60 days, and if you don't pass we refund 100% of your subscription payments. See the requirements
Secure checkout by Stripe Card, Apple Pay, Google Pay Pass Guarantee

ASNT 9712 Level II RT exam FAQ

How many questions are on the ASNT 9712 Level II RT exam?

110 written items over three computer-based elements: General 50, Specific 40 (Pre- and In-Service) and Instruction Preparation 20. Practical elements are also required: gamma or X-ray (2 setups, 1 casting or forging and 1 weld) and film interpretation (20 images, delivered on computer), with a time limit of 5 hours of written exams: general 2 hours, specific 2 hours, instruction preparation 1 hour. each gamma or x-ray practical is a further 1.5 hours and film interpretation 1 hour. Format: computer-based with an on-screen scientific calculator supplied by asnt. codes, standards, procedures and other aids may be used only if asnt supplies or authorizes them for that exam, and asnt's candidate pages do not list them, so confirm with asnt. instruction preparation uses multiple-choice and multiple-response items. this prep covers only the written parts, with 4-option practice items; it does not cover the gamma, x-ray or film interpretation practical exams.

What is the passing score for ASNT 9712 Level II RT?

At least 70% on each written element (General, Specific and Instruction Preparation) and at least 80% on each practical specimen.

How much does the ASNT 9712 Level II RT exam cost?

US$1,270 for ASNT members, US$1,345 for nonmembers (single technique, including film interpretation); all techniques US$1,620 / US$1,715. Retakes: General or Specific US$415 / US$465, Instruction Preparation US$400 / US$455, gamma or X-ray practical US$500 / US$590, film interpretation US$280. ASNT fees differ for members and nonmembers and can change, so confirm on the ASNT certification website before you apply.

Which languages is the ASNT 9712 Level II RT exam offered in?

English only (an online NDT terminology dictionary covers Korean, Mandarin, Spanish, UK English and Arabic).

Where do I take the ASNT 9712 Level II RT exam?

Written exams at Pearson VUE test centers or ASNT Authorized Exam Centers (computer-based); practical exams only at Authorized Exam Centers.

Is this ASNT 9712 Level II RT practice test free?

Yes. The 15-question practice test on this page is free, with an explanation for every answer and no signup. A free account also unlocks the complete study notes for the first topic. The full ASNT 9712 Level II RT prep is Premium at $147 a month for this exam.

What's in the premium ASNT 9712 Level II RT prep?

3,000 practice questions organized topic by topic (Review of Basic Radiographic Principles: 450; Darkroom Facilities, Techniques and Processing: 425; Indications, Discontinuities and Defects: 425; Manufacturing Processes and Associated Discontinuities: 425; Radiological Safety Principles Review: 425; Specific Exam: Pre- and In-Service Applications: 425; Instruction Preparation: 425), 6 full-length timed mock exams of 110 questions, 800 flashcards and 60 comprehensive key notes split across all 7 topics, plus a mistakes bank and the Readiness Score.

Related practice tests

Exam details are summarized from the official candidate information available in October 2026. ASNT changes formats and fees, so confirm with ASNT Certification Services LLC (American Society for Nondestructive Testing) before you book. NDTLevel3Exam is not affiliated with ASNT or Pearson VUE.

Start the free test