Try the full study dashboard free, no signup: practice, flashcards and your Exam Readiness Score. Open it →
Home / Study guides / ASNT 9712 Level II RT
Study guide · Last updated November 2026

ASNT 9712 Level II RT Exam Study Guide (2026)

Everything the ASNT 9712 Level II, Radiographic Testing (RT), written parts tests, topic by topic: what each section covers, the facts that come up most, and how to study it. Pair it with the free 15-question practice test.

The exam at a glance

Questions110 written items over three computer-based elements: General 50, Specific 40 (Pre- and In-Service) and Instruction Preparation 20. Practical elements are also required: gamma or X-ray (2 setups, 1 casting or forging and 1 weld) and film interpretation (20 images, delivered on computer)
Time5 hours of written exams: General 2 hours, Specific 2 hours, Instruction Preparation 1 hour. Each gamma or X-ray practical is a further 1.5 hours and film interpretation 1 hour
Passing scoreAt least 70% on each written element (General, Specific and Instruction Preparation) and at least 80% on each practical specimen
FormatComputer-based with an on-screen scientific calculator supplied by ASNT. Codes, standards, procedures and other aids may be used only if ASNT supplies or authorizes them for that exam, and ASNT's candidate pages do not list them, so confirm with ASNT. Instruction Preparation uses multiple-choice and multiple-response items. This prep covers only the written parts, with 4-option practice items; it does not cover the gamma, X-ray or film interpretation practical exams
Certifying bodyASNT Certification Services LLC (American Society for Nondestructive Testing)
Test providerWritten exams at Pearson VUE test centers or ASNT Authorized Exam Centers (computer-based); practical exams only at Authorized Exam Centers

Mind map: the whole exam on one screen

ASNT 9712 Level II RT
Review of Basic Radiographic Principles
Half-life of Ir-192Effect of raising kV on subject contrastEquation for geometric unsharpnessHalf-life of Co-60
Darkroom Facilities, Techniques and Processing
Time-temperature link in developmentResult of exhausted developerCause of tree-shaped dark marks on filmLate yellow-brown staining on stored film
Indications, Discontinuities and Defects
Image produced by a tungsten inclusionDiscontinuity versus defectBeam alignment needed to show a crackAppearance of burn-through
Manufacturing Processes and Associated Discontinuities
7 key facts
Radiological Safety Principles Review
7 key facts
Specific Exam: Pre- and In-Service Applications
7 key facts
Instruction Preparation
6 key facts
Free with an account

Read the complete ASNT 9712 Level II RT study notes for “Review of Basic Radiographic Principles”

Our first full set of comprehensive notes, about 14 minutes of reading: Sources of radiation · Interaction with the part · Exposure relationships · Contrast and definition · Controlling scatter, a worked exam example, the traps examiners use and a one-minute recap. Create a free account to read it and see how premium notes work before you decide.

Open the free dashboard

1. Review of Basic Radiographic Principles

First topic of the RT General exam (50 items, 2 hours). ASNT publishes no percentage weights for RT. It covers how radiation is produced and absorbed, exposure relationships, contrast and definition, and control of scatter.

Key facts

  • X-rays come from electrons striking a tube target. Gamma rays come from isotopes such as Ir-192, Se-75 and Co-60 and have fixed energies.
  • Raising kV increases penetration and lowers subject contrast. Raising mA or time changes only the amount of radiation.
  • Reciprocity: the same mA-minutes or curie-minutes give the same exposure, within limits, with direct and lead-screen film exposures.
  • Exposure is proportional to source output times time, and inversely proportional to the square of distance.
  • Radiographic contrast combines subject contrast and film contrast. Definition depends on geometric unsharpness, film grain and screen contact.
  • Geometric unsharpness is Ug = Fd/D: source size times object-to-film distance, divided by source-to-object distance.
  • Lead screens intensify the image and absorb lower-energy scatter. Masks, filters and diaphragms reduce scatter at its origin.
  • Backscatter from behind the film is checked with a lead letter B on the back of the film holder.

Flashcards

Half-life of Ir-192About 74 days.
Effect of raising kV on subject contrastIt lowers subject contrast while increasing penetration.
Equation for geometric unsharpnessUg = Fd/D.
Half-life of Co-60About 5.3 years.

Exam tip: On a time-and-distance problem, write the ratio for each change on its own line before multiplying. Most wrong answers forget to square distance or invert the source ratio.

2. Darkroom Facilities, Techniques and Processing

Second General topic: darkroom layout, safelights, film handling, the develop, stop, fix, wash and dry sequence, solution control and film artifacts. ASNT publishes no percentage weights.

Key facts

  • The usual manual sequence is develop, stop bath, fix, wash, wetting agent, then dry.
  • A common standard develops at 68 °F (20 °C) for about 5 to 8 minutes, per the film maker's data.
  • A stop bath of about 30 seconds halts development and protects the fixer from carry-over.
  • Fix for at least twice the clearing time. A clearing time that keeps rising means the fixer is near exhaustion.
  • Poor washing leaves thiosulfate in the emulsion, which later stains the film and fades the image.
  • Safelights are safe only with the right filter, wattage and working distance; test them for fog.
  • Reticulation, static marks, pressure marks, water marks and light fog must be told apart from real indications.

Flashcards

Time-temperature link in developmentHigher temperature needs less time, and lower temperature more.
Result of exhausted developerLower density and contrast.
Cause of tree-shaped dark marks on filmStatic electricity discharge during handling.
Late yellow-brown staining on stored filmResidual thiosulfate from poor washing.

Exam tip: When a mark looks odd, ask whether it could come from the part. Artifacts often continue past the weld or ignore the part's geometry.

3. Indications, Discontinuities and Defects

Third General topic: recognizing and classifying images on film, including indications, weld discontinuities, film artifacts and the difference between a discontinuity and a defect. ASNT publishes no percentage weights.

Key facts

  • An indication is what the film shows, a discontinuity is an interruption in the part, and a defect is a discontinuity that fails the acceptance criteria.
  • Areas of lower absorption (voids, cracks, slag) appear darker. Denser material, such as tungsten, appears lighter.
  • Slag is usually irregular and elongated. Porosity is rounded with smooth edges.
  • Incomplete penetration typically gives a straight dark line at the root center.
  • Sidewall lack of fusion is usually offset from the weld center, along the bevel.
  • Cracks are fine, dark and wavy, and may be missed if the beam isn't nearly parallel to the crack plane.
  • Surface conditions such as spatter, grinding marks and weld ripple can give images that visual examination explains.

Flashcards

Image produced by a tungsten inclusionA very light, sharply defined spot.
Discontinuity versus defectA defect is a discontinuity that fails the acceptance criteria.
Beam alignment needed to show a crackNearly parallel to the crack plane.
Appearance of burn-throughA dark, rounded area, often with a lighter rim.

Exam tip: Decide density first (darker or lighter than the weld), then shape, then position. Those three clues eliminate most wrong options.

Test yourself on these topics

Take the free 15-question ASNT 9712 Level II RT test, then save your results to unlock your Readiness Score and the mistakes bank.

Start the free test

4. Manufacturing Processes and Associated Discontinuities

Fourth General topic: how casting, forging, rolling and welding produce discontinuities and what each one looks like on film. ASNT publishes no percentage weights.

Key facts

  • Casting discontinuities include gas holes, shrinkage, hot tears, cold shuts, sand and slag inclusions.
  • Hot tears are ragged cracks formed at section changes as the metal cools and is restrained.
5 more key facts, 9 key notes, 115 flashcards and 425 practice questions for this topic are in premium.

Flashcards

Reason laminations are hard to detect by RTThey are thin and lie perpendicular to the beam.

Exam tip: Link each flaw to its process and its position in the part. The exam often gives you the process and location before the image.

5. Radiological Safety Principles Review

Fifth General topic: time, distance and shielding, dose units, monitoring and limits. ASNT publishes no percentage weights. Radiation safety training is separate from, and additional to, the 15 days of RT method training.

Key facts

  • Time, distance and shielding are the three means of controlling external dose.
  • Dose rate falls with the inverse square of distance from a point source.
5 more key facts, 8 key notes, 115 flashcards and 425 practice questions for this topic are in premium.

Flashcards

Annual lens of the eye limit15 rem (150 mSv).

Exam tip: Convert everything to the same units before comparing, especially mrem and rem, or mSv and rem.

6. Specific Exam: Pre- and In-Service Applications

A separate 40-item, 2-hour computer-based exam. ASNT lists three areas (Codes, Applications and Techniques) without naming the documents used or publishing percentage weights, so confirm any code edition or supplied procedure with ASNT. ASME Section V Article 2 and Section VIII UW-51 are common references for this work.

Key facts

  • Article 2 sets minimum density at 1.8 for single-film X-ray, 2.0 for single-film gamma and 1.3 for each film in composite viewing, with a 4.0 maximum.
  • Density through the IQI body or next to the designated wire may vary only -15% to +30% from the area of interest without another IQI.
5 more key facts, 8 key notes, 115 flashcards and 425 practice questions for this topic are in premium.

Flashcards

UW-51 elongated indication limit up to 3/4 in thick1/4 in.

Exam tip: Check which thickness the rule uses. UW-51 uses weld thickness excluding reinforcement, and Article 2's IQI selection tables use the single-wall thickness.

7. Instruction Preparation

A separate 20-item, 1-hour computer-based element with multiple-choice and multiple-response items, testing the creation of a written RT instruction. Weighting: foreword 5%, personnel 5%, equipment and media 5%, product 10%, test conditions 10%, detailed instructions 40%, recording and classifying results 20%, reporting 5%.

Key facts

  • An NDT instruction describes the exact steps for carrying out a test according to a standard or procedure.
  • Detailed instructions, including settings, carry the largest share at 40%.
4 more key facts, 8 key notes, 110 flashcards and 425 practice questions for this topic are in premium.

Flashcards

Weight of detailed instructions and settings40%.

Exam tip: Read each multiple-response option on its own. Keep only what a Level I could carry out exactly as written.

How to pass

  • Each written element has its own 70% minimum, so a strong General score can't offset a weak Specific or Instruction Preparation result.
  • Two of the five General topics are about film work: darkroom processing and how discontinuities look. Know artifacts as well as you know weld flaws, since both have to be told apart on film.
  • Instruction Preparation is 20 items in 1 hour, and the detailed test instructions carry 40% of its weighting. Practice stating kV, mA, exposure time, source-to-film distance and film type outright.
  • Keep exposure arithmetic quick: inverse square, milliampere-minutes or curie-minutes, film speed from log exposure and geometric unsharpness. ASNT supplies the calculator, so review its guide before test day.

Frequently asked questions

How long should I study for the ASNT 9712 Level II RT exam?

Most working candidates need 4 to 8 weeks at 45 to 60 minutes a day. Book your exam once your Readiness Score has stayed at 80 or higher for about a week.

Can I take the ASNT 9712 Level II RT exam online?

No. ASNT NDT Level III exams are taken in person, on a computer, at Pearson VUE test centers or ASNT Authorized Exam Centers. Format: computer-based with an on-screen scientific calculator supplied by asnt. codes, standards, procedures and other aids may be used only if asnt supplies or authorizes them for that exam, and asnt's candidate pages do not list them, so confirm with asnt. instruction preparation uses multiple-choice and multiple-response items. this prep covers only the written parts, with 4-option practice items; it does not cover the gamma, x-ray or film interpretation practical exams. Check ASNT's current exam information for the rules.

What score do I need to pass the ASNT 9712 Level II RT exam?

At least 70% on each written element (General, Specific and Instruction Preparation) and at least 80% on each practical specimen. The exam has 110 written items over three computer-based elements: general 50, specific 40 (pre- and in-service) and instruction preparation 20. practical elements are also required: gamma or x-ray (2 setups, 1 casting or forging and 1 weld) and film interpretation (20 images, delivered on computer) and a time limit of 5 hours of written exams: general 2 hours, specific 2 hours, instruction preparation 1 hour. each gamma or x-ray practical is a further 1.5 hours and film interpretation 1 hour.

What are the most tested topics?

The outline covers review of basic radiographic principles, darkroom facilities, techniques and processing, indications, discontinuities and defects, manufacturing processes and associated discontinuities, radiological safety principles review, specific exam: pre- and in-service applications, instruction preparation. Use the free practice test to see which ones you need most.

The premium ASNT 9712 Level II RT study path

Premium ASNT 9712 Level II RT prep is studied one topic at a time. Each step starts with that topic's key notes and flashcard deck, then its own question sets of 25, so you master one topic before you move to the next. When every topic is strong, the 6 full mock exams show you're ready.

3,000practice questions, every answer explained
6full-length mock exams, 110 questions each, timed
800flashcards with spaced repetition, sorted by topic
60comprehensive key notes across 7 topics

Your step-by-step study path

  1. 1
    Review of Basic Radiographic Principles9 key notes, 115 flashcards, then 450 practice questions in 18 sets of 25
    Notes free with an account
  2. 2
    Darkroom Facilities, Techniques and Processing9 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  3. 3
    Indications, Discontinuities and Defects9 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  4. 4
    Manufacturing Processes and Associated Discontinuities9 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  5. 5
    Radiological Safety Principles Review8 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  6. 6
    Specific Exam: Pre- and In-Service Applications8 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  7. 7
    Instruction Preparation8 key notes, 110 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  8. Final step: 6 full mock exams110 questions each, timed like test day. Pass them, then book your exam.
    Premium

Get every note, flashcard and question

Most popular · cancel anytime

Premium Monthly

$147/month
per exam
About $4.83 a day · less than a retake fee, for the certification that lets you approve procedures and certify technicians
  • One ASNT Level III exam of your choice: Basic, UT, RT or MT
  • 3,000 practice questions + 6 full mock exams per exam
  • 800 flashcards + 60 key notes per exam, by topic, plus mind maps
  • Spaced repetition + mistakes bank
  • Readiness Score & detailed reports
  • Video lessons as they release
  • Content updates during your access
  • 5 bonuses: NDT formula sheet, discontinuity atlas, study planner and more
  • Pass Guarantee: complete the prep, pass or 100% back

Renews monthly until you cancel. Cancel in two clicks from your account; you keep access until the end of the month you've paid for. No minimum term.

Best value · 3 months free

Premium Yearly

$1,323/year
per exam
Pay for 9 months, get 12. Save $441 against paying monthly.
  • One ASNT Level III exam of your choice: Basic, UT, RT or MT
  • 3,000 practice questions + 6 full mock exams per exam
  • 800 flashcards + 60 key notes per exam, by topic, plus mind maps
  • Spaced repetition + mistakes bank
  • Readiness Score & detailed reports
  • Video lessons as they release
  • Content updates during your access
  • 5 bonuses: NDT formula sheet, discontinuity atlas, study planner and more
  • Pass Guarantee: complete the prep, pass or 100% back

Renews once a year until you cancel. We email you before each renewal. Cancel any time from your account; you keep access until the end of the year you've paid for.

Pass Guarantee. Complete the full prep, sit your exam within 60 days, and if you don't pass we refund 100% of your subscription payments. See the requirements
Secure checkout by Stripe Card, Apple Pay, Google Pay Pass Guarantee

Summarized from ASNT's official candidate information and the rules cited, checked October 2026. Confirm current requirements with ASNT Certification Services LLC (American Society for Nondestructive Testing).

Start the free test