Try the full study dashboard free, no signup: practice, flashcards and your Exam Readiness Score. Open it →
Home / Practice tests / UT Level III
ASNT NDT Level III · Last updated November 2026

ASNT NDT Level III Ultrasonic Testing (UT) Exam: free practice test

The most-taken ASNT Level III method exam. Since 15 July 2026 it follows a revised outline: UT principles and theory, materials and product forms, data collection, interpretation and reporting, training and certification programs, and UT equipment. Expect wave physics and calculation items alongside procedure and program questions.

Watch the free 4:35 video lesson: the key UT Level III concepts →

Premium: 3,000 practice questions, 6 full mock exams, 800 flashcards and 60 comprehensive key notes, topic by topic. See the study path ·

Or open the free UT Level III study dashboard: flashcards, notes and your Readiness Score, no signup →

About the UT Level III exam

The most-taken ASNT Level III method exam. Since 15 July 2026 it follows a revised outline: UT principles and theory, materials and product forms, data collection, interpretation and reporting, training and certification programs, and UT equipment. Expect wave physics and calculation items alongside procedure and program questions.

What's on the exam

UT Level III
Ultrasonic Principles and Wave Physics
7 key facts
Transducers, Instruments and Couplants
6 key facts
Contact and Immersion Techniques
6 key facts
Calibration, Reference Standards and DAC
6 key facts
Phased Array and TOFD
6 key facts
Interpretation of Product Forms and Welds
6 key facts
Codes, Procedures and UT Program Management
5 key facts

Each branch is a topic in the official outline. Members see every key fact on the full mind map. Read the free study guide →

How to pass the UT Level III exam

  • 135 questions in 4 hours. Calculation items (Snell's law, near field, wavelength, decibels, skip distance) take longer, so keep the recall items fast.
  • Memorize the velocities you'll use most: steel longitudinal about 5,920 m/s, steel shear about 3,230 m/s, water about 1,480 m/s, acrylic about 2,730 m/s.
  • The 2026 outline adds weight on writing and qualifying procedures, PAUT and TOFD, and running training and certification programs. Study the Level III role, not just the physics.
  • Practice with the on-screen calculator: sine, inverse sine and log functions all come up.

Save your results and get your Readiness Score

Create a free account after the test: your score by topic, a mistakes bank, the complete study notes for the first topic, flashcards and the NDT Level III Formula Sheet.

Take the test first

What's in the premium UT Level III prep

Premium UT Level III prep is studied one topic at a time. Each step starts with that topic's key notes and flashcard deck, then its own question sets of 25, so you master one topic before you move to the next. When every topic is strong, the 6 full mock exams show you're ready.

3,000practice questions, every answer explained
6full-length mock exams, 135 questions each, timed
800flashcards with spaced repetition, sorted by topic
60comprehensive key notes across 7 topics

Your step-by-step study path

  1. 1
    Ultrasonic Principles and Wave Physics9 key notes, 115 flashcards, then 450 practice questions in 18 sets of 25
    Notes free with an account
  2. 2
    Transducers, Instruments and Couplants9 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  3. 3
    Contact and Immersion Techniques9 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  4. 4
    Calibration, Reference Standards and DAC9 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  5. 5
    Phased Array and TOFD8 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  6. 6
    Interpretation of Product Forms and Welds8 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  7. 7
    Codes, Procedures and UT Program Management8 key notes, 110 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  8. Final step: 6 full mock exams135 questions each, timed like test day. Pass them, then book your exam.
    Premium
Free with an account

Read the complete UT Level III study notes for “Ultrasonic Principles and Wave Physics”

Our first full set of comprehensive notes, about 15 minutes of reading: Wave modes · Velocity, wavelength and frequency · Acoustic impedance and reflection · Refraction, Snell's law and critical angles · Attenuation and decibels, a worked exam example, the traps examiners use and a one-minute recap. Create a free account to read it and see how premium notes work before you decide.

Open the free dashboard

Study tools included

3,000 practice questions

3,000 exam-style questions per exam, organized topic by topic in sets of 25. Every answer explained, with the rule it comes from.

6 full mock exams

6 full-length timed mock exams per exam, with real question counts and time limits, so test day feels like practice day.

Exam Readiness Score

One 0 to 100 number that tells you when you're ready to book. Reach 80 and you're covered by our Pass Guarantee.

800 flashcards + spaced repetition

800 flashcards per exam, in a deck for each topic, that come back right before you'd forget them. Five minutes a day keeps every number fresh.

60 comprehensive key notes

60 key notes per exam, split across its topics and each explained in full: the concepts, worked exam examples, the traps examiners use and a quick recap. Your first set is free with an account.

Mind maps

See the whole exam on one screen: every topic and the facts under it.

Sample questions with answers

These are the questions in the free test above, with answers. Try the test first. You'll learn more by getting some wrong.

1. What is the wavelength of a 5 MHz longitudinal wave in steel (velocity 5,920 m/s)?
Answer: 1.18 mm. λ = V ÷ f = 5.92 mm/µs ÷ 5 MHz = 1.18 mm. (0.65 mm is the shear wavelength at 5 MHz: 3.23 ÷ 5.)
2. Using an acrylic wedge (longitudinal velocity 2,730 m/s) on steel (longitudinal 5,920 m/s, shear 3,230 m/s), what is the first critical angle?
Answer: 27.5°. First critical angle: sin θ = V1 ÷ V2(L) = 2.73 ÷ 5.92 = 0.461, so θ ≈ 27.5°. Above it the refracted longitudinal wave disappears. The second critical angle uses the shear velocity: sin⁻¹(2.73 ÷ 3.23) ≈ 57.7°.
3. Acoustic impedances are 1.48 MRayl for water and 45.4 MRayl for steel. About what percentage of incident sound energy is reflected at a water-steel interface at normal incidence?
Answer: 88%. Energy reflection coefficient R = ((Z2 − Z1) ÷ (Z2 + Z1))² = (43.92 ÷ 46.88)² = 0.937² ≈ 0.88, so about 88% is reflected and 12% transmitted.
4. Which wave mode cannot travel through water or other liquids?
Answer: Shear (transverse) waves. Shear waves need a medium that resists shear. Liquids and gases don't, so shear waves only travel in solids. That is why immersion testing generates shear waves in the part by mode conversion at the surface.
5. Which piezoelectric material is known as the most efficient receiver but is soluble in water?
Answer: Lithium sulfate. Lithium sulfate is an excellent receiver but water soluble and fragile. PZT and barium titanate are efficient transmitters; quartz is very stable but a poor converter.
6. Increasing the damping (backing) of a transducer mainly:
Answer: Shortens the pulse and improves axial resolution, at some cost in sensitivity. Heavier damping stops the element ringing sooner: a shorter pulse, broader bandwidth and better near-surface and axial resolution, but less energy, so lower sensitivity.
7. What is the near-field length of a 12.7 mm (0.5 in) diameter, 5 MHz straight-beam transducer in steel (longitudinal velocity 5,920 m/s)?
Answer: 34 mm. N = D² f ÷ 4V = (12.7² × 5) ÷ (4 × 5.92) = 806.5 ÷ 23.68 ≈ 34 mm. (136 mm is the near field of the same probe in water, where the wavelength is four times shorter.)
8. In immersion testing of a 100 mm thick steel plate with longitudinal waves, what minimum water path keeps the second front-surface echo beyond the first back-wall echo?
Answer: 25 mm. The second interface echo arrives after another round trip in water. It falls beyond the back-wall echo when water path × (1 ÷ 1.48) > thickness × (1 ÷ 5.92), so water path > 100 × 1.48 ÷ 5.92 = 25 mm. In practice add a margin.
9. A 60° shear-wave probe is used on a 25 mm thick plate. What is the full skip distance?
Answer: 86.6 mm. Skip distance = 2T × tan θ = 2 × 25 × tan 60° = 50 × 1.732 = 86.6 mm. 43.3 mm is the half skip; 100 mm is the full-skip sound path (2T ÷ cos θ).
10. A reference reflector is set to 80% full screen height. At the same gain an indication peaks at 20%. How many decibels below the reference is it?
Answer: 12 dB. dB = 20 log (A1 ÷ A2) = 20 log (80 ÷ 20) = 20 log 4 = 12 dB. Every 6 dB halves or doubles the amplitude: 80 → 40 → 20.
11. A distance-amplitude correction (DAC) curve compensates for:
Answer: Loss of amplitude with distance from beam spread and attenuation, so reflectors at different depths can be compared. A DAC curve plots the response of equal reference reflectors at increasing distances. Indications are then judged against the curve at their own depth, not against a single reference amplitude.
12. In time-of-flight diffraction (TOFD), the through-wall height of a flaw is measured from:
Answer: The arrival times of the diffracted signals from the upper and lower flaw tips. TOFD uses tip-diffracted signals, which are weak but arrive at times set by geometry. Height comes from the time difference between upper- and lower-tip signals, so it doesn't depend on amplitude or flaw orientation.
13. How does a phased array instrument steer and focus the beam?
Answer: By applying calculated time delays (focal laws) to the firing and receiving of individual elements. A focal law sets the delay for each element. Wavefronts from the elements add up to a beam at the chosen angle and focal depth, which is how sectorial and linear scans are built.
14. A straight-beam test of rolled steel plate shows a strong echo at mid-thickness over a wide area with complete loss of the back-wall echo. What is the most likely cause?
Answer: A lamination. Laminations are flattened planar discontinuities parallel to the plate surface. They reflect the straight beam strongly at their depth and shadow the back wall.
15. Your UT procedure, written to ASME Section V Article 4, lists the search unit angle as an essential variable and specifies 45° probes only. A crew wants to use a 60° probe. What is required?
Answer: A revision of, or an addendum to, the written procedure before the 60° probe is used. Under ASME Section V Article 4, changing an essential variable beyond the value or range the procedure specifies requires a revision of, or an addendum to, the written procedure. Where the referencing code requires procedure qualification, the change also needs requalification by demonstration. The Level II's judgment or a note in the report is not enough.

Get the full UT Level III prep

Most popular · cancel anytime

Premium Monthly

$147/month
per exam
About $4.83 a day · less than a retake fee, for the certification that lets you approve procedures and certify technicians
  • One ASNT Level III exam of your choice: Basic, UT, RT or MT
  • 3,000 practice questions + 6 full mock exams per exam
  • 800 flashcards + 60 key notes per exam, by topic, plus mind maps
  • Spaced repetition + mistakes bank
  • Readiness Score & detailed reports
  • Video lessons as they release
  • Content updates during your access
  • 5 bonuses: NDT formula sheet, discontinuity atlas, study planner and more
  • Pass Guarantee: complete the prep, pass or 100% back

Renews monthly until you cancel. Cancel in two clicks from your account; you keep access until the end of the month you've paid for. No minimum term.

Best value · 3 months free

Premium Yearly

$1,323/year
per exam
Pay for 9 months, get 12. Save $441 against paying monthly.
  • One ASNT Level III exam of your choice: Basic, UT, RT or MT
  • 3,000 practice questions + 6 full mock exams per exam
  • 800 flashcards + 60 key notes per exam, by topic, plus mind maps
  • Spaced repetition + mistakes bank
  • Readiness Score & detailed reports
  • Video lessons as they release
  • Content updates during your access
  • 5 bonuses: NDT formula sheet, discontinuity atlas, study planner and more
  • Pass Guarantee: complete the prep, pass or 100% back

Renews once a year until you cancel. We email you before each renewal. Cancel any time from your account; you keep access until the end of the year you've paid for.

Pass Guarantee. Complete the full prep, sit your exam within 60 days, and if you don't pass we refund 100% of your subscription payments. See the requirements
Secure checkout by Stripe Card, Apple Pay, Google Pay Pass Guarantee

Certification guide

How to become an ASNT NDT Level III: ASNT NDT Level III is the credential for NDT professionals who write procedures, interpret codes, choose methods and train and certify technicians. It is issued by [ASNT Certification Services](https://certification.asnt.org/certification/asnt-ndt-level-iii) after you prove your education and Level II experience and pass the Basic exam plus at least one method exam. Here is the path, what it costs and how long it takes.

UT Level III exam FAQ

How many questions are on the UT Level III exam?

135 multiple-choice questions (some are unscored pretest items), with a time limit of 4 hours. Format: closed book, computer-based, with an on-screen calculator.

What is the passing score for UT Level III?

Not published per exam. Aim for 80% or higher in practice (ASNT says its criterion-referenced cut scores are typically 70% to 80%).

How much does the UT Level III exam cost?

US$545 for ASNT members, US$625 for nonmembers (retake US$475 / US$555). ASNT fees differ for members and nonmembers and can change, so confirm on the ASNT certification website before you apply.

Which languages is the UT Level III exam offered in?

English (an online NDT terminology translation dictionary is available).

Where do I take the UT Level III exam?

Pearson VUE test centers and ASNT Authorized Exam Centers (in person, computer-based).

Is this UT Level III practice test free?

Yes. The 15-question practice test on this page is free, with an explanation for every answer and no signup. A free account also unlocks the complete study notes for the first topic. The full UT Level III prep is Premium at $147 a month for this exam.

What's in the premium UT Level III prep?

3,000 practice questions organized topic by topic (Ultrasonic Principles and Wave Physics: 450; Transducers, Instruments and Couplants: 425; Contact and Immersion Techniques: 425; Calibration, Reference Standards and DAC: 425; Phased Array and TOFD: 425; Interpretation of Product Forms and Welds: 425; Codes, Procedures and UT Program Management: 425), 6 full-length timed mock exams of 135 questions, 800 flashcards and 60 comprehensive key notes split across all 7 topics, plus a mistakes bank and the Readiness Score.

Compare UT Level III with the other ASNT Level III exams

Related practice tests

Exam details are summarized from the official candidate information available in October 2026. ASNT changes formats and fees, so confirm with ASNT Certification Services LLC (American Society for Nondestructive Testing) before you book. NDTLevel3Exam is not affiliated with ASNT or Pearson VUE.

Start the free test