Try the full study dashboard free, no signup: practice, flashcards and your Exam Readiness Score. Open it →
Home / Practice tests / ASNT NDT Level III MFL
ASNT · Last updated November 2026

ASNT NDT Level III Magnetic Flux Leakage Testing (MFL): free practice test

The ASNT Level III magnetic flux leakage method exam: 90 questions in 2 hours across six domains: principles and theory, equipment and materials, techniques and standardization, interpretation and evaluation, standards, and procedures. Passing it with the NDT Level III Basic exam gives ASNT NDT Level III certification in MFL, renewed every five years.

Watch the free 4:19 video lesson: the key ASNT NDT Level III MFL concepts →

Premium: 3,000 practice questions, 6 full mock exams, 800 flashcards and 60 comprehensive key notes, topic by topic. See the study path ·

Or open the free ASNT NDT Level III MFL study dashboard: flashcards, notes and your Readiness Score, no signup →

About the ASNT NDT Level III MFL exam

The ASNT Level III magnetic flux leakage method exam: 90 questions in 2 hours across six domains: principles and theory, equipment and materials, techniques and standardization, interpretation and evaluation, standards, and procedures. Passing it with the NDT Level III Basic exam gives ASNT NDT Level III certification in MFL, renewed every five years.

What's on the exam

ASNT NDT Level III MFL
MFL Principles and Theory
7 key facts
MFL Equipment and Sensing Elements
7 key facts
Techniques, Field Strength and Standardization
7 key facts
Interpretation, Characterization and Process Control
7 key facts
MFL Standards and Specifications
7 key facts
MFL Procedures and Applications
7 key facts

Each branch is a topic in the official outline. Members see every key fact on the full mind map. Read the free study guide →

How to pass the ASNT NDT Level III MFL exam

  • 90 questions in 2 hours is 80 seconds each. Expect reasoning about why a signal looks the way it does, not just definitions.
  • Know your sensors: induction coils respond to the rate of change of flux, so their output depends on scan speed; Hall-effect and magnetoresistive sensors measure the field itself.
  • Field direction decides what you find. Axial MFL is weak on narrow axial flaws; circumferential (transverse) field tools are built for them.
  • ASNT's outline names Förster's work, finite element modeling and DC versus AC flux leakage, so study the theory behind signal shape as well as field practice on pipelines, tank floors and tubulars.

Save your results and get your Readiness Score

Create a free account after the test: your score by topic, a mistakes bank, the complete study notes for the first topic, flashcards and the NDT Level III Formula Sheet.

Take the test first

What's in the premium ASNT NDT Level III MFL prep

Premium ASNT NDT Level III MFL prep is studied one topic at a time. Each step starts with that topic's key notes and flashcard deck, then its own question sets of 25, so you master one topic before you move to the next. When every topic is strong, the 6 full mock exams show you're ready.

3,000practice questions, every answer explained
6full-length mock exams, 90 questions each, timed
800flashcards with spaced repetition, sorted by topic
60comprehensive key notes across 6 topics

Your step-by-step study path

  1. 1
    MFL Principles and Theory10 key notes, 135 flashcards, then 500 practice questions in 20 sets of 25
    Notes free with an account
  2. 2
    MFL Equipment and Sensing Elements10 key notes, 135 flashcards, then 500 practice questions in 20 sets of 25
    Premium
  3. 3
    Techniques, Field Strength and Standardization10 key notes, 135 flashcards, then 500 practice questions in 20 sets of 25
    Premium
  4. 4
    Interpretation, Characterization and Process Control10 key notes, 135 flashcards, then 500 practice questions in 20 sets of 25
    Premium
  5. 5
    MFL Standards and Specifications10 key notes, 130 flashcards, then 500 practice questions in 20 sets of 25
    Premium
  6. 6
    MFL Procedures and Applications10 key notes, 130 flashcards, then 500 practice questions in 20 sets of 25
    Premium
  7. Final step: 6 full mock exams90 questions each, timed like test day. Pass them, then book your exam.
    Premium
Free with an account

Read the complete ASNT NDT Level III MFL study notes for “MFL Principles and Theory”

Our first full set of comprehensive notes, about 14 minutes of reading: How a leakage field forms · Why field level matters · Models: dipoles, Förster and finite elements · DC versus AC flux leakage, a worked exam example, the traps examiners use and a one-minute recap. Create a free account to read it and see how premium notes work before you decide.

Open the free dashboard

Study tools included

3,000 practice questions

3,000 exam-style questions per exam, organized topic by topic in sets of 25. Every answer explained, with the rule it comes from.

6 full mock exams

6 full-length timed mock exams per exam, with real question counts and time limits, so test day feels like practice day.

Exam Readiness Score

One 0 to 100 number that tells you when you're ready to book. Reach 80 and you're covered by our Pass Guarantee.

800 flashcards + spaced repetition

800 flashcards per exam, in a deck for each topic, that come back right before you'd forget them. Five minutes a day keeps every number fresh.

60 comprehensive key notes

60 key notes per exam, split across its topics and each explained in full: the concepts, worked exam examples, the traps examiners use and a quick recap. Your first set is free with an account.

Mind maps

See the whole exam on one screen: every topic and the facts under it.

Sample questions with answers

These are the questions in the free test above, with answers. Try the test first. You'll learn more by getting some wrong.

1. An axially magnetized steel tube is run well below saturation, and a shallow outside pit gives only a weak leakage signal. Why does raising the magnetization toward saturation increase the signal?
Answer: Near saturation the ligament can't carry the diverted flux, so it leaks. At low field the steel's high permeability lets flux simply detour through the remaining wall under the pit. Near saturation the incremental permeability falls sharply, the ligament can't carry the diverted flux, and it leaks into the air where sensors detect it. Saturation also makes signals less sensitive to permeability and stress variations.
2. A contractor proposes an AC-magnetized flux leakage scanner, run from the outside, to find internal corrosion in 12 mm (0.47 in) wall pipe. What is the main objection?
Answer: Skin effect keeps AC flux near the scanned surface, missing far-side loss. Alternating flux is confined to a thin layer near the magnetized surface by the skin effect, so AC flux leakage suits near-side, surface-breaking flaws. Detecting metal loss on the far wall needs DC (or permanent magnet) magnetization driven close to saturation through the full thickness.
3. An MFL in-line tool with induction coil sensors slows from about 3 m/s to 0.3 m/s through a station bypass. What happens to the metal-loss signals recorded in that section?
Answer: They fall roughly tenfold, because coil output tracks the rate of change of flux. An induction coil's voltage is proportional to the rate of change of flux through it, which for a moving tool scales with velocity. At one tenth of the speed the amplitude drops roughly tenfold, so coil-based data need velocity correction. Hall-effect sensors measure the field itself and are largely speed independent.
4. A wire rope examination must report both broken wires and gradual loss of metallic cross-section from uniform wear. Which measurement detects the gradual loss of metallic area?
Answer: Hall sensors measuring the main flux through the rope. Localized faults such as broken wires create short leakage fields that surface coils pick up. A slow, uniform loss of steel area produces almost no leakage; it shows as a reduction in the total main flux through the rope, measured with Hall or similar flux sensors (the LMA channel in ASTM E1571 terms). Differential coils also cancel slow changes.
5. A Level III reviews an in-line tool specification because small isolated pits are being missed or undersized. Which design change most directly improves this?
Answer: Reduce the circumferential sensor spacing and axial sampling interval. A pit smaller than the gap between sensors, or shorter than a few axial samples, may fall between measurement points and be missed or undersized. Denser sensors and finer sampling capture its peak. More lift-off weakens signals, and going far past saturation adds background without resolving small features.
6. An axial-field MFL tool has run a pipeline with known axial seam-weld cracking and reports nothing at the seam. What should the Level III recommend?
Answer: Run a circumferential (transverse) field MFL tool. Leakage is greatest when a flaw lies across the flux. Narrow axial cracks and axial slotting run parallel to an axial field and produce very little leakage, so axial MFL can miss them. A transverse (circumferential) field tool turns the flux across these features.
7. A tank floor MFL scanner is standardized on a bare reference plate. The floor to be examined has a 3 mm (0.12 in) coating. What should be done before scanning?
Answer: Repeat the standardization with nonmagnetic shims equal to the coating thickness. Coating acts as lift-off, and leakage fields fall off quickly with distance, so a bare-plate standardization overstates sensitivity on coated floors. Standardizing with nonmagnetic shims (or a coated reference plate) at the same thickness sets thresholds that reflect the real condition. Raising the threshold would make things worse.
8. At the periodic check during production MFL of tubes, the reference standard notch no longer triggers the alarm. The fault is found and fixed. What happens to the tubes tested since the previous check?
Answer: All tubes since the last acceptable check are retested. If standardization fails, the system's sensitivity since the last good check is unknown. Standard practice (ASTM E570 and similar tubular specs) requires restandardizing and retesting every tube examined since the last acceptable check. Sampling or relying on the repair leaves possibly rejectable tubes in the accepted lot.
9. In the radial (normal) component trace from an isolated metal-loss feature, which characteristic tracks the feature's axial length most closely?
Answer: The spacing between the positive and negative peaks. The radial component changes sign across the feature, with peaks roughly over its two ends, so peak separation follows axial length. Amplitude depends mainly on depth (and also on length, lift-off and magnetization), which is why sizing models combine several signal features rather than reading one directly.
10. A DC MFL tool reports metal loss, and the operator needs to know whether it is internal or external. Which data best answers this?
Answer: Whether the internal-surface eddy current channel also shows it. A DC field near saturation produces leakage from both internal and external metal loss, so the main MFL channel alone can't separate them. Tools carry an ID/OD discrimination channel, often a high-frequency eddy current or weak-field sensor that responds only to the internal surface. A hit on both channels means internal; MFL only means external.
11. Under the Pipeline Operators Forum dimension classes, a metal-loss feature in 8 mm wall pipe is 6 mm long and 5 mm wide. How is it classed?
Answer: Pinhole. The POF geometric parameter A equals the wall thickness, but not less than 10 mm, so here A is 10 mm. A feature with both length and width below 1A is a pinhole. Pitting needs length and width of at least 1A, and slotting needs one dimension of 1A or more.
12. A mill will test seamless steel casing by flux leakage to a specification that calls up ASTM E570. What reference standard should the procedure specify?
Answer: Same size and grade of tube with the specified notches or holes. The reference standard must match the product in diameter, wall and magnetic properties so the field and signal response are the same, with the notch or drilled hole types, locations and sizes the purchaser specifies. Natural flaws are not reproducible, and a plate or different size changes the magnetic circuit.
13. Which document sets the qualification and certification requirements for the analysts who evaluate MFL in-line inspection data on a gas pipeline?
Answer: ANSI/ASNT ILI-PQ. ANSI/ASNT ILI-PQ is the personnel qualification standard for in-line inspection, covering technicians and data analysts. API 1163 qualifies the ILI system and its performance claims and refers to ILI-PQ for personnel. ASTM E570 covers tubular products and API 653 covers aboveground storage tanks.
14. A storage tank floor MFL procedure is being written. What should it require for indications above the reporting threshold before repair decisions are made?
Answer: Prove-up of each indication with ultrasonic thickness measurement. Floor MFL is a screening method: its depth estimate is affected by lift-off, plate thickness and whether the loss is top side or bottom side. Indications above threshold are proved up with UT to measure the remaining thickness, which then drives the repair decision, consistent with API 653 tank bottom practice.
15. An ILI vendor changes the magnetizer and sensor array on its MFL tool between runs on the same pipeline. What should the Level III require before the new data are used for growth comparison?
Answer: Re-verification of the new tool's sizing performance. Changing the magnetizer or sensors alters field level, lift-off and signal response, so the tool's sizing performance must be re-verified (pull tests, dig verification or known features, in line with API 1163). Without that, apparent growth between runs may simply be a difference in tool response.

Get the full ASNT NDT Level III MFL prep

Most popular · cancel anytime

Premium Monthly

$147/month
per exam
About $4.83 a day · less than a retake fee, for the certification that lets you approve procedures and certify technicians
  • One ASNT Level III exam of your choice: Basic, UT, RT or MT
  • 3,000 practice questions + 6 full mock exams per exam
  • 800 flashcards + 60 key notes per exam, by topic, plus mind maps
  • Spaced repetition + mistakes bank
  • Readiness Score & detailed reports
  • Video lessons as they release
  • Content updates during your access
  • 5 bonuses: NDT formula sheet, discontinuity atlas, study planner and more
  • Pass Guarantee: complete the prep, pass or 100% back

Renews monthly until you cancel. Cancel in two clicks from your account; you keep access until the end of the month you've paid for. No minimum term.

Best value · 3 months free

Premium Yearly

$1,323/year
per exam
Pay for 9 months, get 12. Save $441 against paying monthly.
  • One ASNT Level III exam of your choice: Basic, UT, RT or MT
  • 3,000 practice questions + 6 full mock exams per exam
  • 800 flashcards + 60 key notes per exam, by topic, plus mind maps
  • Spaced repetition + mistakes bank
  • Readiness Score & detailed reports
  • Video lessons as they release
  • Content updates during your access
  • 5 bonuses: NDT formula sheet, discontinuity atlas, study planner and more
  • Pass Guarantee: complete the prep, pass or 100% back

Renews once a year until you cancel. We email you before each renewal. Cancel any time from your account; you keep access until the end of the year you've paid for.

Pass Guarantee. Complete the full prep, sit your exam within 60 days, and if you don't pass we refund 100% of your subscription payments. See the requirements
Secure checkout by Stripe Card, Apple Pay, Google Pay Pass Guarantee

ASNT NDT Level III MFL exam FAQ

How many questions are on the ASNT NDT Level III MFL exam?

90 multiple-choice questions (some are unscored pretest items), with a time limit of 2 hours. Format: computer-based multiple choice with an on-screen calculator. asnt does not publish reference-material rules on its exam page; confirm with asnt. certification also needs the ndt level iii basic exam.

What is the passing score for ASNT NDT Level III MFL?

Not published per exam. ASNT sets criterion-referenced cut scores and says its exams are typically in the 70% to 80% range; aim for 80% or higher in practice.

How much does the ASNT NDT Level III MFL exam cost?

US$525 for ASNT members, US$605 for nonmembers (retake US$455 / US$535). ASNT fees differ for members and nonmembers and can change, so confirm on the ASNT certification website before you apply.

Which languages is the ASNT NDT Level III MFL exam offered in?

English only (an online NDT terminology dictionary covers Korean, Mandarin, Spanish, UK English and Arabic).

Where do I take the ASNT NDT Level III MFL exam?

Pearson VUE test centers and ASNT Authorized Exam Centers (in person, computer-based); no practical exam.

Is this ASNT NDT Level III MFL practice test free?

Yes. The 15-question practice test on this page is free, with an explanation for every answer and no signup. A free account also unlocks the complete study notes for the first topic. The full ASNT NDT Level III MFL prep is Premium at $147 a month for this exam.

What's in the premium ASNT NDT Level III MFL prep?

3,000 practice questions organized topic by topic (MFL Principles and Theory: 500; MFL Equipment and Sensing Elements: 500; Techniques, Field Strength and Standardization: 500; Interpretation, Characterization and Process Control: 500; MFL Standards and Specifications: 500; MFL Procedures and Applications: 500), 6 full-length timed mock exams of 90 questions, 800 flashcards and 60 comprehensive key notes split across all 6 topics, plus a mistakes bank and the Readiness Score.

Related practice tests

Exam details are summarized from the official candidate information available in October 2026. ASNT changes formats and fees, so confirm with ASNT Certification Services LLC (American Society for Nondestructive Testing) before you book. NDTLevel3Exam is not affiliated with ASNT or Pearson VUE.

Start the free test