Try the full study dashboard free, no signup: practice, flashcards and your Exam Readiness Score. Open it →
Home / Practice tests / ASNT 9712 Level III RT
ASNT · Last updated November 2026

ASNT 9712 Level III Radiographic Testing (RT), written parts: free practice test

ASNT's ISO 9712-based Level III certification in radiography. Candidates need 15 days of Level II and 5 days of Level III training (plus radiation safety training) and 270 to 540 days of experience, then pass the Basic, Basic Supplemental, RT Method and Procedure Preparation exams and the gamma and X-ray practicals. The RT Method exam follows a revised four-domain outline for exams after 18 August 2026; this prep covers only the written parts, not the practicals.

Watch the free 4:25 video lesson: the key ASNT 9712 Level III RT concepts →

Premium: 3,000 practice questions, 6 full mock exams, 800 flashcards and 60 comprehensive key notes, topic by topic. See the study path ·

Or open the free ASNT 9712 Level III RT study dashboard: flashcards, notes and your Readiness Score, no signup →

About the ASNT 9712 Level III RT exam

ASNT's ISO 9712-based Level III certification in radiography. Candidates need 15 days of Level II and 5 days of Level III training (plus radiation safety training) and 270 to 540 days of experience, then pass the Basic, Basic Supplemental, RT Method and Procedure Preparation exams and the gamma and X-ray practicals. The RT Method exam follows a revised four-domain outline for exams after 18 August 2026; this prep covers only the written parts, not the practicals.

What's on the exam

ASNT 9712 Level III RT
RT Principles and Theory
7 key facts
RT Equipment and Materials
7 key facts
RT Interpretation and Evaluation
7 key facts
Safety and Health Standards
7 key facts
Procedure Preparation
6 key facts
Basic Exam: NDT Methods, Materials and Programs
6 key facts
Basic Supplemental: ASNT 9712 Certification System
7 key facts

Each branch is a topic in the official outline. Members see every key fact on the full mind map. Read the free study guide →

How to pass the ASNT 9712 Level III RT exam

  • Check which exams your approval letter lists. A valid Level III holder is exempt from the Basic exam, and ASNT's fee table charges current ASNT NDT Level III holders only for Basic Supplemental, Procedure Preparation and the practicals.
  • The RT Method outline for exams after 18 August 2026 is written around the Level III job: approving techniques, verifying equipment calibration, auditing film quality, setting acceptance criteria when none exist and auditing jobsite safety.
  • In Procedure Preparation, performance of the test carries 40% of the marks and materials and equipment 20%. Practice writing a complete RT procedure from a standard in under 4 hours, with every parameter stated, not left to judgment.
  • Each written element needs 70% on its own. After a first failure you wait 30 days; after a second, 90 days plus 7 hours of training; all elements must be finished within 2 years of the first failure.

Save your results and get your Readiness Score

Create a free account after the test: your score by topic, a mistakes bank, the complete study notes for the first topic, flashcards and the NDT Level III Formula Sheet.

Take the test first

What's in the premium ASNT 9712 Level III RT prep

Premium ASNT 9712 Level III RT prep is studied one topic at a time. Each step starts with that topic's key notes and flashcard deck, then its own question sets of 25, so you master one topic before you move to the next. When every topic is strong, the 6 full mock exams show you're ready.

3,000practice questions, every answer explained
6full-length mock exams, 135 questions each, timed
800flashcards with spaced repetition, sorted by topic
60comprehensive key notes across 7 topics

Your step-by-step study path

  1. 1
    RT Principles and Theory9 key notes, 115 flashcards, then 450 practice questions in 18 sets of 25
    Notes free with an account
  2. 2
    RT Equipment and Materials9 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  3. 3
    RT Interpretation and Evaluation9 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  4. 4
    Safety and Health Standards9 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  5. 5
    Procedure Preparation8 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  6. 6
    Basic Exam: NDT Methods, Materials and Programs8 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  7. 7
    Basic Supplemental: ASNT 9712 Certification System8 key notes, 110 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  8. Final step: 6 full mock exams135 questions each, timed like test day. Pass them, then book your exam.
    Premium
Free with an account

Read the complete ASNT 9712 Level III RT study notes for “RT Principles and Theory”

Our first full set of comprehensive notes, about 15 minutes of reading: Contrast and definition · Interaction and attenuation · Sources and exposure · Geometry and unsharpness, a worked exam example, the traps examiners use and a one-minute recap. Create a free account to read it and see how premium notes work before you decide.

Open the free dashboard

Study tools included

3,000 practice questions

3,000 exam-style questions per exam, organized topic by topic in sets of 25. Every answer explained, with the rule it comes from.

6 full mock exams

6 full-length timed mock exams per exam, with real question counts and time limits, so test day feels like practice day.

Exam Readiness Score

One 0 to 100 number that tells you when you're ready to book. Reach 80 and you're covered by our Pass Guarantee.

800 flashcards + spaced repetition

800 flashcards per exam, in a deck for each topic, that come back right before you'd forget them. Five minutes a day keeps every number fresh.

60 comprehensive key notes

60 key notes per exam, split across its topics and each explained in full: the concepts, worked exam examples, the traps examiners use and a quick recap. Your first set is free with an account.

Mind maps

See the whole exam on one screen: every topic and the facts under it.

Sample questions with answers

These are the questions in the free test above, with answers. Try the test first. You'll learn more by getting some wrong.

1. A film radiograph of a weld is reshot on the same film type with exposure increased so that the area of interest reads 3.0 instead of 1.8. Everything else is unchanged. How does radiographic contrast change?
Answer: It rises, because film gradient increases with density. Radiographic contrast is subject contrast multiplied by film contrast. Subject contrast depends on the part and the energy, which did not change, but the film gradient rises with density over the usable range, so the same thickness difference gives a larger density difference. This is why codes set minimum densities.
2. A contractor proposes Co-60 for 3/8 in (10 mm) steel butt welds because exposure times would be short. As Level III, what is your main technical objection?
Answer: Its photon energy gives low subject contrast in thin steel. Co-60 emits 1.17 and 1.33 MeV photons, so a thin steel section attenuates very little and the thickness differences that reveal flaws produce almost no contrast. Its 5.27-year half-life is long, not short. Lower-energy sources such as Se-75 or Ir-192, or X-rays, suit thin steel.
3. A digital detector array with 200 µm pixels is used at a geometric magnification of 2 with an X-ray tube whose focal spot is 0.4 mm. What is the geometric unsharpness in the detector plane?
Answer: 0.4 mm. With magnification, geometric unsharpness is focal spot size times (M − 1): 0.4 × (2 − 1) = 0.4 mm. Taking focal spot times M gives 0.8 mm, a common slip. Magnification improves effective pixel size but only helps if the focal spot is small enough to keep unsharpness in check.
4. Steel piping welds with a 0.3 in (8 mm) wall must be radiographed in a busy operating plant. Ir-192 and Se-75 sources of similar activity are available. Which choice best balances image quality and site safety?
Answer: Se-75, for better contrast and a smaller controlled area. Se-75 emits lower-energy gamma rays than Ir-192, so it gives better subject contrast on thin steel and a lower dose rate per curie, which shrinks the barricaded area. Exposures are longer, but Se-75 is well suited to steel of about this thickness. Higher energy reduces contrast, it does not improve it.
5. During an audit you find that a densitometer used for ASME Section V Article 2 film work was last fully calibrated 5 months ago, although the step wedge check has been done at the start of every shift. What is your finding?
Answer: Not compliant: calibration is required every 90 days. Article 2 requires densitometers to be calibrated at least every 90 days during use, with periodic verification checks against a step wedge film at the start of each shift and at the other listed triggers. The shift check verifies the instrument between calibrations; it does not replace the 90-day calibration.
6. A digital detector array shows a faint image of the previous high-dose exposure superimposed on the next part's image. What is this and what should the Level III require?
Answer: Image lag; allow recovery and recalibrate before use. A residual ghost of an earlier exposure is image lag (burn-in), a known DDA property characterized under ASTM E2597. The detector must be allowed to recover and the offset and gain calibration rerun before production images are accepted. Backscatter raises background density but does not reproduce the previous part.
7. A specification requires 2-2T sensitivity on a 1.0 in steel weld. The radiographer can only show a 1-4T hole with a hole-type IQI. Using equivalent IQI sensitivity, how does 1-4T compare?
Answer: About 1.4%, more demanding than 2-2T. Equivalent sensitivity is (100/X) × √(T × H / 2). For 2-2T: √(0.02 × 0.04 / 2) = 2.0%. For 1-4T: √(0.01 × 0.04 / 2) = 1.41%. A lower percentage is a more demanding level, so 1-4T at least meets the 2-2T requirement where the specification allows equivalent levels.
8. A radiograph of a 3/4 in austenitic stainless steel weld shows a mottled pattern that could be mistaken for fine porosity or cracking. When the beam angle is changed by a few degrees, the pattern moves. What is it most likely to be?
Answer: Diffraction mottling from coarse grains. Coarse austenitic and nickel-alloy grains diffract X-rays and gamma rays, giving a mottled pattern that shifts with small changes in beam angle or energy. Real porosity and cracks stay fixed relative to the weld. Confirm by reshooting at a slightly different angle or kV before calling a rejectable flaw.
9. A 30 in pipe girth weld is radiographed in one panoramic exposure with the Ir-192 source on the pipe axis and 8 overlapping films around the circumference. Under ASME Section V Article 2, what is the minimum number of IQIs?
Answer: Three. When the source is on the axis and the whole circumference is shot in one exposure, Article 2 requires at least three IQIs spaced about 120° apart, however many films are used. One IQI per film would be the usual rule for separate exposures, which is the tempting error here.
10. An unshielded Co-60 source gives 240 mR/h at 20 ft. A collimator provides 2 tenth-value layers of shielding toward a public walkway. About how far from the source does the dose rate in the collimated beam fall to 2 mR/h?
Answer: About 22 ft. Two tenth-value layers cut the dose rate by 100, to 2.4 mR/h at 20 ft. By the inverse square law, d = 20 × √(2.4 / 2) ≈ 21.9 ft. Using only one TVL gives about 69 ft and ignoring the collimator gives about 219 ft. Always confirm the boundary with a calibrated survey meter.
11. During a jobsite safety audit under US NRC 10 CFR Part 34, you find a radiographer's alarming ratemeter preset to alarm at 1 R/h. What is required?
Answer: Reset it to alarm at no more than 500 mR/h. Part 34 requires alarming ratemeters to be preset to alarm at 500 mR/h, checked for alarm function at the start of each shift and calibrated at least yearly. The ratemeter is worn in addition to the direct-reading dosimeter and the personnel dosimeter, not instead of them.
12. In ASNT's weighting table for the 9712 Level III Procedure Preparation exam, which part of the written procedure carries the most marks?
Answer: Performance of the test. Performance of the test (method and technique, setting up, conducting the test and characterizing discontinuities) carries 40% under Table D.3 of the program document. Materials and equipment carry 20%, overall presentation 10% and acceptance criteria 7%. Spend your 4 hours where the marks are.
13. A candidate's draft RT procedure says only: 'Use an appropriate IQI and achieve acceptable film density.' Why does this lose marks?
Answer: It must state IQI designation, essential hole or wire, placement and density limits. A procedure must let a Level II set up and run the test with no guesswork, so it states the IQI designation and essential hole or wire, IQI placement and the density range drawn from the supplied standard. Vague wording loses marks under setting up and conducting the test. A signature does not repair missing content.
14. An aircraft operator needs to find fatigue cracks at fastener holes in the second layer of an aluminum lap joint without removing the fasteners. Which method should the Level III recommend?
Answer: Low-frequency eddy current testing. Low-frequency eddy currents penetrate through the top skin and around installed fasteners to detect cracks in a second layer. Penetrant and visual testing need open, accessible surfaces, and magnetic particle testing does not work on aluminum. Method selection by material, access and flaw location is a core Basic exam skill.
15. An ASNT 9712 Level III RT certificate holder leaves NDT work for a continuous 14 months to manage a non-NDT project. How does the ASNT 9712 Program Document treat this?
Answer: It is a significant interruption, so certification may be suspended. A significant interruption is a continuous break of more than 1 year from the certified duties, or two or more breaks totaling more than 2 years. ASNT may suspend certification and sets the conditions for revalidation. The 2-year figure applies to combined breaks, which is the tempting misreading.

Get the full ASNT 9712 Level III RT prep

Most popular · cancel anytime

Premium Monthly

$147/month
per exam
About $4.83 a day · less than a retake fee, for the certification that lets you approve procedures and certify technicians
  • One ASNT Level III exam of your choice: Basic, UT, RT or MT
  • 3,000 practice questions + 6 full mock exams per exam
  • 800 flashcards + 60 key notes per exam, by topic, plus mind maps
  • Spaced repetition + mistakes bank
  • Readiness Score & detailed reports
  • Video lessons as they release
  • Content updates during your access
  • 5 bonuses: NDT formula sheet, discontinuity atlas, study planner and more
  • Pass Guarantee: complete the prep, pass or 100% back

Renews monthly until you cancel. Cancel in two clicks from your account; you keep access until the end of the month you've paid for. No minimum term.

Best value · 3 months free

Premium Yearly

$1,323/year
per exam
Pay for 9 months, get 12. Save $441 against paying monthly.
  • One ASNT Level III exam of your choice: Basic, UT, RT or MT
  • 3,000 practice questions + 6 full mock exams per exam
  • 800 flashcards + 60 key notes per exam, by topic, plus mind maps
  • Spaced repetition + mistakes bank
  • Readiness Score & detailed reports
  • Video lessons as they release
  • Content updates during your access
  • 5 bonuses: NDT formula sheet, discontinuity atlas, study planner and more
  • Pass Guarantee: complete the prep, pass or 100% back

Renews once a year until you cancel. We email you before each renewal. Cancel any time from your account; you keep access until the end of the year you've paid for.

Pass Guarantee. Complete the full prep, sit your exam within 60 days, and if you don't pass we refund 100% of your subscription payments. See the requirements
Secure checkout by Stripe Card, Apple Pay, Google Pay Pass Guarantee

ASNT 9712 Level III RT exam FAQ

How many questions are on the ASNT 9712 Level III RT exam?

Four computer-based written elements: Basic 135 items, Basic Supplemental 55 items, RT Method 135 items, and Procedure Preparation (write one complete RT procedure to a supplied standard). Gamma and X-ray practical exams are also required, with a time limit of basic 4 hours, basic supplemental 2 hours, rt method 4 hours, procedure preparation 4 hours. Format: computer-based with an on-screen calculator. codes, standards and other aids are allowed only if asnt supplies or authorizes them; the standard for procedure preparation is supplied. procedure preparation is a written procedure, not multiple choice, graded on asnt's weighting table. this prep covers only the written knowledge parts, with 4-option practice items; it does not cover the gamma and x-ray practical exams.

What is the passing score for ASNT 9712 Level III RT?

At least 70% on each written element and at least 80% on each practical exam (ASNT 9712 Program Document Rev 02, section 8).

How much does the ASNT 9712 Level III RT exam cost?

US$1,460 for ASNT members, US$1,655 for nonmembers (Procedure Preparation and practical exams; current ASNT NDT Level III holders add the US$120 Basic Supplemental fee). Applicants without ASNT NDT Level III add US$1,210 / US$1,370 for the RT Method, Basic and Basic Supplemental exams. Retakes: Method US$475 / US$555, Procedure Preparation US$560 / US$655, each practical US$500 / US$590, RT Film Interpretation US$280. ASNT fees differ for members and nonmembers and can change, so confirm on the ASNT certification website before you apply.

Which languages is the ASNT 9712 Level III RT exam offered in?

English only (an online NDT terminology dictionary covers Korean, Mandarin, Spanish, UK English and Arabic).

Where do I take the ASNT 9712 Level III RT exam?

Written exams at Pearson VUE test centers or ASNT Authorized Exam Centers (computer-based); gamma and X-ray practical exams only at Authorized Exam Centers.

Is this ASNT 9712 Level III RT practice test free?

Yes. The 15-question practice test on this page is free, with an explanation for every answer and no signup. A free account also unlocks the complete study notes for the first topic. The full ASNT 9712 Level III RT prep is Premium at $147 a month for this exam.

What's in the premium ASNT 9712 Level III RT prep?

3,000 practice questions organized topic by topic (RT Principles and Theory: 450; RT Equipment and Materials: 425; RT Interpretation and Evaluation: 425; Safety and Health Standards: 425; Procedure Preparation: 425; Basic Exam: NDT Methods, Materials and Programs: 425; Basic Supplemental: ASNT 9712 Certification System: 425), 6 full-length timed mock exams of 135 questions, 800 flashcards and 60 comprehensive key notes split across all 7 topics, plus a mistakes bank and the Readiness Score.

Related practice tests

Exam details are summarized from the official candidate information available in October 2026. ASNT changes formats and fees, so confirm with ASNT Certification Services LLC (American Society for Nondestructive Testing) before you book. NDTLevel3Exam is not affiliated with ASNT or Pearson VUE.

Start the free test