Format at a glance
All exams are multiple choice and include some unscored pretest items. ASNT doesn't publish a fixed pass mark; its cut scores are set by the Angoff or IRT method and are typically in the 70% to 80% range.
| Exam | Questions | Time |
|---|---|---|
| NDT Basic | 135 | 4 hours |
| UT, RT, ET, AE, LT | 135 | 4 hours |
| MT, PT, VT, IR, MFL | 90 | 2 hours |
What the Basic covers
- NDT certification: qualification and certification processes, written practices, exams, audits (SNT-TC-1A 2024, CP-189 2024).
- Application of NDT methods: choosing and validating methods and techniques across AE, ET, IR, LT, MFL, MT, NR, PT, RT, UT and VT.
- NDT training: developing and approving programs, instruction, on-the-job training and mentoring.
- Materials science and process technology: flaws by material and process, failure investigation, destructive test samples.
- Codes, standards, specifications and procedures: interpreting requirements, writing and approving procedures, acceptance criteria, external audits.
What changed in 2026
Basic exams taken after 1 January 2026 use the 2024 editions of SNT-TC-1A and CP-189 in place of the 2020 editions. UT exams after 15 July 2026 and RT exams after 18 August 2026 follow task-based outlines that put more weight on the Level III's job: writing and qualifying procedures, evaluating equipment, training and certifying technicians, and auditing. ASNT has said revised outlines are coming for other methods too, so check the exam page before you book.
See where you stand in 10 minutes
Take the free NDT Basic practice test. 15 questions, every answer explained.
Pacing
Four-hour exams give about 1 minute 45 seconds per question; two-hour method exams about 80 seconds. Recall questions should take 30 seconds so you have time for calculations (Snell's law, exposure, unsharpness, coil current). Flag anything over 3 minutes and come back.
A 12-week plan
- Weeks 1-3: certification programs (SNT-TC-1A and CP-189), training and exams. Flashcards daily.
- Weeks 4-6: all 11 methods at Level II depth: principle, application, limitation.
- Weeks 7-8: materials, processes and discontinuities; codes and procedures. First full timed Basic mock.
- Weeks 9-11: your method exam topics, calculation drills and a full method mock.
- Week 12: mistakes bank until it's empty, second full mocks, light review in the last two days.
Frequently asked questions
How many questions are on the ASNT NDT Level III Basic exam?
135 multiple-choice questions in 4 hours, closed book and computer-based.
What is the passing score for ASNT Level III exams?
ASNT doesn't publish one fixed score. It sets a criterion-referenced cut score for each exam, typically in the 70% to 80% range.
Can I take the ASNT Level III exams online?
No. They are in-person, computer-based exams at Pearson VUE test centers or ASNT Authorized Exam Centers. No practical exam is required.
Do I have to take the Basic again for each method?
No. The Basic is needed once for initial certification. Additional methods only need their method exam, and recertification before expiry can be by method exams.
What happens if I fail?
You can retake after 30 days following a first failure and after 90 days following a second. After a third failure you wait one year and reapply. You can't sit any exam more than three times in two years.
Official sources
- ASNT: NDT Level III examinations
- ASNT: NDT Level III certification and fees
- ASNT: Psychometrics information
Practice tests for these certifications
This guide is general information, checked November 2026, not legal advice. ASNT rules change; confirm with ASNT before you apply.
