Try the full study dashboard free, no signup: practice, flashcards and your Exam Readiness Score. Open it →
Home / Practice tests / ASNT NDT Level III VT
ASNT · Last updated November 2026

ASNT NDT Level III Visual Testing (VT): free practice test

The ASNT Level III visual testing method exam: 90 questions in 2 hours. ASNT's outline lists 35 topics, from vision and light, optical aids and remote systems through materials, joining, in-service and coating applications to interpretation variables, documentation and safety. Passing it with the NDT Level III Basic exam gives ASNT NDT Level III certification in VT.

Watch the free 4:34 video lesson: the key ASNT NDT Level III VT concepts →

Premium: 3,000 practice questions, 6 full mock exams, 800 flashcards and 60 comprehensive key notes, topic by topic. See the study path ·

Or open the free ASNT NDT Level III VT study dashboard: flashcards, notes and your Readiness Score, no signup →

About the ASNT NDT Level III VT exam

The ASNT Level III visual testing method exam: 90 questions in 2 hours. ASNT's outline lists 35 topics, from vision and light, optical aids and remote systems through materials, joining, in-service and coating applications to interpretation variables, documentation and safety. Passing it with the NDT Level III Basic exam gives ASNT NDT Level III certification in VT.

What's on the exam

ASNT NDT Level III VT
Fundamentals, Vision and Lighting
8 key facts
Direct and Remote Visual Equipment
7 key facts
Dimensional Tools, Replication and Other Aids
7 key facts
Materials, Processes and Fabrication Discontinuities
7 key facts
In-Service Inspection and Coatings
7 key facts
Variables Affecting Interpretation and Evaluation
7 key facts
Requirements, Documentation and Safety
7 key facts

Each branch is a topic in the official outline. Members see every key fact on the full mind map. Read the free study guide →

How to pass the ASNT NDT Level III VT exam

  • 90 questions in 2 hours is 80 seconds each. Practise the short calculations: magnifier power, resolution at a distance, foreshortening, film thickness and sampling percentages.
  • The outline is broad: about a third covers equipment and aids (magnifiers to lasers), so know what each tool measures and its limits.
  • Expect weld and casting discontinuity recognition plus in-service damage such as erosion, pitting and coating failures, not only welds.
  • Know ASME Section V Article 9 direct and remote rules and its essential variables, plus how acceptance codes such as AWS D1.1 and ASME B31.3 are applied.

Save your results and get your Readiness Score

Create a free account after the test: your score by topic, a mistakes bank, the complete study notes for the first topic, flashcards and the NDT Level III Formula Sheet.

Take the test first

What's in the premium ASNT NDT Level III VT prep

Premium ASNT NDT Level III VT prep is studied one topic at a time. Each step starts with that topic's key notes and flashcard deck, then its own question sets of 25, so you master one topic before you move to the next. When every topic is strong, the 6 full mock exams show you're ready.

3,000practice questions, every answer explained
6full-length mock exams, 90 questions each, timed
800flashcards with spaced repetition, sorted by topic
60comprehensive key notes across 7 topics

Your step-by-step study path

  1. 1
    Fundamentals, Vision and Lighting9 key notes, 115 flashcards, then 450 practice questions in 18 sets of 25
    Notes free with an account
  2. 2
    Direct and Remote Visual Equipment9 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  3. 3
    Dimensional Tools, Replication and Other Aids9 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  4. 4
    Materials, Processes and Fabrication Discontinuities9 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  5. 5
    In-Service Inspection and Coatings8 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  6. 6
    Variables Affecting Interpretation and Evaluation8 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  7. 7
    Requirements, Documentation and Safety8 key notes, 110 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  8. Final step: 6 full mock exams90 questions each, timed like test day. Pass them, then book your exam.
    Premium
Free with an account

Read the complete ASNT NDT Level III VT study notes for “Fundamentals, Vision and Lighting”

Our first full set of comprehensive notes, about 15 minutes of reading: How the eye resolves detail · Light and its units · Lighting technique · Ambient conditions and the test object, a worked exam example, the traps examiners use and a one-minute recap. Create a free account to read it and see how premium notes work before you decide.

Open the free dashboard

Study tools included

3,000 practice questions

3,000 exam-style questions per exam, organized topic by topic in sets of 25. Every answer explained, with the rule it comes from.

6 full mock exams

6 full-length timed mock exams per exam, with real question counts and time limits, so test day feels like practice day.

Exam Readiness Score

One 0 to 100 number that tells you when you're ready to book. Reach 80 and you're covered by our Pass Guarantee.

800 flashcards + spaced repetition

800 flashcards per exam, in a deck for each topic, that come back right before you'd forget them. Five minutes a day keeps every number fresh.

60 comprehensive key notes

60 key notes per exam, split across its topics and each explained in full: the concepts, worked exam examples, the traps examiners use and a quick recap. Your first set is free with an account.

Mind maps

See the whole exam on one screen: every topic and the facts under it.

Sample questions with answers

These are the questions in the free test above, with answers. Try the test first. You'll learn more by getting some wrong.

1. A normal eye resolves detail separated by about 1 minute of arc. About what is the smallest separation an inspector can resolve when viewing a surface from 24 in?
Answer: About 0.007 in. Resolution is distance × tan(1 arc minute): 24 × 0.000291 = 0.007 in. The 0.0035 in figure is the result at 12 in. Doubling viewing distance doubles the smallest detail you can see, which is why codes limit the viewing distance.
2. A polished stainless steel surface is lit by a single bright lamp, and glare from the reflection hides surface detail. What is the best correction?
Answer: Use diffuse lighting or move the lamp so the reflection misses the eye. Polished surfaces reflect specularly, so a point source sends its image straight to the eye and washes out contrast. Diffusing the light or changing the lighting angle removes the reflected glare. More intensity only adds glare.
3. A simple magnifier has a focal length of 2 in. Using the usual 10 in reference viewing distance, what is its magnifying power?
Answer: 5X. Magnifying power is 10 ÷ focal length in inches, so 10 ÷ 2 = 5X. Multiplying instead gives 20X. As power rises, field of view and depth of field fall, so use the lowest power that shows the detail.
4. With a videoscope inside a heat exchanger shell, no object of known size can be placed beside a crack. Which measurement technique still lets the inspector measure its length?
Answer: Stereo measurement. Stereo (and similar phase or 3D) measurement calculates true dimensions from two offset images, so no reference object is needed. Comparison measurement needs a known reference in the same plane and at the same distance as the indication.
5. A welding procedure sets a maximum interpass temperature of 450 °F. How should a temperature-indicating crayon be used to check it?
Answer: Mark with a 450 °F crayon: if it melts, wait before welding. A crayon melts when the surface reaches its rated temperature. For a maximum limit, use a crayon at that limit: if it melts, the joint is too hot and must cool. For a minimum preheat, the crayon at the minimum must melt.
6. An engineer wants evidence of creep cavitation on the outer surface of an in-service steam header without cutting a sample. Which visual aid fits?
Answer: Surface replication after polishing and etching. Field metallography by replication copies the polished and etched microstructure onto acetate film, which is then examined under a microscope for creep voids. Comparators measure finish, not microstructure, and a borescope cannot resolve cavities at the grain scale.
7. A steel casting shows a jagged, branching crack at the junction of a thick and a thin section, with an oxidized fracture face. What is the most likely discontinuity?
Answer: Hot tear. Hot tears form near the end of solidification when contraction is restrained, typically at section changes, and are ragged and branched with oxidized faces. Cold shuts are smooth lines where metal streams meet; a misrun is an incompletely filled section.
8. A continuous 5/16 in fillet weld, 40 in long, on a statically loaded connection (not a web-to-flange weld) measures 1/4 in over a total of 3.5 in. Under AWS D1.1 visual acceptance criteria, what is the result?
Answer: Accept: within 1/16 in for not more than 10% of length. D1.1 lets a continuous fillet weld underrun its nominal size by up to 1/16 in without correction if the undersize part does not exceed 10% of the weld length. Here 3.5 ÷ 40 = 8.75% at 1/16 in under, so it is acceptable. Web-to-flange welds have extra limits at the ends.
9. Visual examination of a flame-cut edge on a rolled steel plate shows a straight line separation running parallel to the plate surfaces near mid-thickness. What is it most likely to be?
Answer: Lamination. Laminations are flattened inclusions or porosity from the ingot, rolled into planes parallel to the surface, and appear on cut edges near mid-thickness. Seams and laps are on the rolled surface, and cold cracks are not parallel planar layers.
10. On an in-service carbon steel pipe carrying fluid with entrained solids, where should a Level III direct the visual examination for erosion at a long-radius elbow?
Answer: The outer radius (extrados) and just downstream. Particles keep moving straight when the flow turns, so they strike the outer radius of the elbow and the area just downstream. Erosion-corrosion thinning and grooving are worst there. The inner radius sees lower velocity at the wall.
11. A coating specification calls for a dry film thickness of 4 mils. The paint is 65% volume solids and is applied without thinning. What wet film thickness should be applied?
Answer: About 6.2 mils. Dry film thickness equals wet film thickness × volume solids, so wet = 4 ÷ 0.65 = 6.15, about 6.2 mils. Multiplying instead gives 2.6 mils, too thin. Thinning would raise the wet thickness needed further.
12. A videoscope views a crack lying flat on a surface at 60° from the surface normal, with the crack running in the plane of the tilt. Measured as if square to the view, it appears 5 mm long. About what is its true length?
Answer: 10 mm. Viewing at an angle foreshortens length by the cosine of the angle from the normal: apparent = true × cos 60° = true × 0.5, so the true length is 5 ÷ 0.5 = 10 mm. Measure square to the surface or correct for the viewing angle.
13. Audit records show that one inspector's detection rate on a 100% visual sort of small castings falls steadily in the last hours of each shift. What should the Level III change first?
Answer: Add rest breaks or task rotation to limit vigilance loss. Detection that falls with time on a repetitive task points to vigilance decrement and fatigue, a human factor. Scheduled breaks or task rotation address the cause. Lighting or magnification changes do not fix a time-related decline.
14. Under ASME Section V Article 9, which change to a written visual examination procedure is an essential variable requiring requalification?
Answer: A change from direct to remote visual examination. Article 9 treats a change in technique, such as direct to remote or to translucent examination, as essential, along with a decrease in lighting intensity. The lighting equipment, surface preparation tools and examination sequence are nonessential and need only a procedure revision.
15. Under ASME B31.3 random visual examination, one weld in the sample fails because of an unacceptable undercut. What does the code require next?
Answer: Examine two more welds of the same kind by the same welder. B31.3 progressive sampling requires two additional samples of the same kind, by the same welder or operator, for each defective item. If they pass, the lot is accepted after repair; if either fails, the examination escalates further.

Get the full ASNT NDT Level III VT prep

Most popular · cancel anytime

Premium Monthly

$147/month
per exam
About $4.83 a day · less than a retake fee, for the certification that lets you approve procedures and certify technicians
  • One ASNT Level III exam of your choice: Basic, UT, RT or MT
  • 3,000 practice questions + 6 full mock exams per exam
  • 800 flashcards + 60 key notes per exam, by topic, plus mind maps
  • Spaced repetition + mistakes bank
  • Readiness Score & detailed reports
  • Video lessons as they release
  • Content updates during your access
  • 5 bonuses: NDT formula sheet, discontinuity atlas, study planner and more
  • Pass Guarantee: complete the prep, pass or 100% back

Renews monthly until you cancel. Cancel in two clicks from your account; you keep access until the end of the month you've paid for. No minimum term.

Best value · 3 months free

Premium Yearly

$1,323/year
per exam
Pay for 9 months, get 12. Save $441 against paying monthly.
  • One ASNT Level III exam of your choice: Basic, UT, RT or MT
  • 3,000 practice questions + 6 full mock exams per exam
  • 800 flashcards + 60 key notes per exam, by topic, plus mind maps
  • Spaced repetition + mistakes bank
  • Readiness Score & detailed reports
  • Video lessons as they release
  • Content updates during your access
  • 5 bonuses: NDT formula sheet, discontinuity atlas, study planner and more
  • Pass Guarantee: complete the prep, pass or 100% back

Renews once a year until you cancel. We email you before each renewal. Cancel any time from your account; you keep access until the end of the year you've paid for.

Pass Guarantee. Complete the full prep, sit your exam within 60 days, and if you don't pass we refund 100% of your subscription payments. See the requirements
Secure checkout by Stripe Card, Apple Pay, Google Pay Pass Guarantee

ASNT NDT Level III VT exam FAQ

How many questions are on the ASNT NDT Level III VT exam?

90 multiple-choice questions (some are unscored pretest items), with a time limit of 2 hours. Format: computer-based multiple choice with an on-screen calculator. asnt does not publish reference-material rules on its exam page; confirm with asnt. certification also needs the ndt level iii basic exam.

What is the passing score for ASNT NDT Level III VT?

Not published per exam. ASNT sets criterion-referenced cut scores (Angoff or IRT) and says its exams are typically in the 70% to 80% range; aim for 80% or higher in practice.

How much does the ASNT NDT Level III VT exam cost?

US$525 for ASNT members, US$605 for nonmembers (retake US$455 / US$535). ASNT fees differ for members and nonmembers and can change, so confirm on the ASNT certification website before you apply.

Which languages is the ASNT NDT Level III VT exam offered in?

English only (an online NDT terminology dictionary covers Korean, Mandarin, Spanish, UK English and Arabic).

Where do I take the ASNT NDT Level III VT exam?

Pearson VUE test centers and ASNT Authorized Exam Centers (in person, computer-based); no practical exam.

Is this ASNT NDT Level III VT practice test free?

Yes. The 15-question practice test on this page is free, with an explanation for every answer and no signup. A free account also unlocks the complete study notes for the first topic. The full ASNT NDT Level III VT prep is Premium at $147 a month for this exam.

What's in the premium ASNT NDT Level III VT prep?

3,000 practice questions organized topic by topic (Fundamentals, Vision and Lighting: 450; Direct and Remote Visual Equipment: 425; Dimensional Tools, Replication and Other Aids: 425; Materials, Processes and Fabrication Discontinuities: 425; In-Service Inspection and Coatings: 425; Variables Affecting Interpretation and Evaluation: 425; Requirements, Documentation and Safety: 425), 6 full-length timed mock exams of 90 questions, 800 flashcards and 60 comprehensive key notes split across all 7 topics, plus a mistakes bank and the Readiness Score.

Related practice tests

Exam details are summarized from the official candidate information available in October 2026. ASNT changes formats and fees, so confirm with ASNT Certification Services LLC (American Society for Nondestructive Testing) before you book. NDTLevel3Exam is not affiliated with ASNT or Pearson VUE.

Start the free test