ASNT 9712 Level III Magnetic Particle Testing (MT), written parts: free practice test
ASNT's ISO 9712-based Level III certification in magnetic particle testing, requiring 5 days of Level II and 4 days of Level III training, 180 to 360 days of experience, four written exams and bench and yoke practicals. The MT method exam has five domains: principles and theory, equipment and materials, interpreting and documenting results, codes and procedures, and training and certification programs. This prep covers only the written parts, not the practical exams.
Watch the free 4:18 video lesson: the key ASNT 9712 Level III MT concepts →
Premium: 3,000 practice questions, 6 full mock exams, 800 flashcards and 60 comprehensive key notes, topic by topic. See the study path ·
- Lesson 2: Flux leakage and flaw orientation in depthWhy angle to the field matters and how leakage forms at discontinuities.
- Lesson 3: Circular versus longitudinal fields: choosing the techniqueDirect contact, central conductor, coils and yokes matched to flaw direction.
- Lesson 4: Current waveforms, skin effect and penetrationAC, half-wave and full-wave rectified current and what each finds.
- Lesson 5: Developing and demonstrating new MT techniquesProving a technique with known-flaw parts, shims and field measurements.
- Lesson 6: Running a probability of detection studyHit/miss data, POD curves and reading a90/95 correctly.
- Lesson 7: Selecting the right demagnetization methodReversing DC, AC decay, closed shapes and residual field limits.
- Lesson 8: Evaluating and selecting new MT equipmentBenches, yokes, prods and coils assessed against ISO 9934-3.
- Lesson 9: Choosing the inspection mediumWet versus dry, fluorescent versus colour contrast, temperature limits.
- Lesson 10: Viewing conditions and light meter controlISO 3059 UV-A and white light limits and meter checks.
- Lesson 11: Managing the equipment maintenance programAmmeter, timer, lift test and bath checks with out-of-tolerance actions.
- Lesson 12: Discontinuities by product formCastings, forgings, rolled products and welds and their typical indications.
- Lesson 13: Relevant versus non-relevant indicationsGeometry, magnetic writing and permeability changes, and how to confirm.
- Lesson 14: Evaluating indications against acceptance levelsLinear and rounded indications under ISO 23278 and ASME rules.
- Lesson 15: Reviewing and approving MT reportsWhat a report must contain so the test can be repeated.
- Lesson 16: Field strength calculations for every techniqueISO 9934-1 Annex A formulas for prods, coils and conductors.
- Lesson 17: ISO 17638 and testing weldsTwo examinations at right angles, coverage and weld-specific technique.
- Lesson 18: ASTM E709, E1444 and ASME Section VU.S.
- Lesson 19: Procedures, technique sheets and instructionsClient requirement review and the hierarchy of written practice documents.
- Lesson 20: Running an ISO 9712 based certification programTraining hours, experience, vision checks, exams and program audits.
- Lesson 21: Basic exam: materials, processes and other methodsMetallurgy, welding, and the limits of PT, RT, UT and VT.
- Lesson 22: Procedure Preparation: structure and weightingHow Table D.3 marks each section of your written procedure.
- Lesson 23: Procedure Preparation: a full worked procedureWriting a complete MT procedure to a supplied standard, step by step.
Keep going after the free lesson. Every topic gets its own lesson, plus the full question bank, timed simulations and study tools.
About the ASNT 9712 Level III MT exam
ASNT's ISO 9712-based Level III certification in magnetic particle testing, requiring 5 days of Level II and 4 days of Level III training, 180 to 360 days of experience, four written exams and bench and yoke practicals. The MT method exam has five domains: principles and theory, equipment and materials, interpreting and documenting results, codes and procedures, and training and certification programs. This prep covers only the written parts, not the practical exams.
What's on the exam
Each branch is a topic in the official outline. Members see every key fact on the full mind map. Read the free study guide →
How to pass the ASNT 9712 Level III MT exam
- If you already hold ASNT NDT Level III in MT, the new work is the 55-item Basic Supplemental (ISO 9712 rules) and the 4-hour Procedure Preparation exam. Put your time there.
- The MT method exam is written around Level III tasks: POD studies, choosing demagnetization, approving reports and technique sheets, and running training and exams. Expect decisions, not definitions.
- For Procedure Preparation, practise writing full procedures against an ISO or ASTM MT standard. Performance of the test carries 40% of the marks and equipment 20% in ASNT's Table D.3.
- ASNT says revised exam topics are rolling out for several methods. Check the 9712 Level III exam page for MT changes before you book.
Save your results and get your Readiness Score
Create a free account after the test: your score by topic, a mistakes bank, the complete study notes for the first topic, flashcards and the NDT Level III Formula Sheet.
What's in the premium ASNT 9712 Level III MT prep
Premium ASNT 9712 Level III MT prep is studied one topic at a time. Each step starts with that topic's key notes and flashcard deck, then its own question sets of 25, so you master one topic before you move to the next. When every topic is strong, the 6 full mock exams show you're ready.
Your step-by-step study path
- 1MT Principles, Theory and Demagnetization9 key notes, 115 flashcards, then 450 practice questions in 18 sets of 25Notes free with an account
- 2MT Equipment and Materials9 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25Premium
- 3Interpreting, Evaluating and Documenting MT Results9 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25Premium
- 4MT Codes, Standards, Procedures and Techniques9 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25Premium
- 5MT Training and Certification Programs8 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25Premium
- 6Basic and Basic Supplemental: ISO 9712, Materials and Other Methods8 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25Premium
- 7Procedure Preparation (Item F)8 key notes, 110 flashcards, then 425 practice questions in 17 sets of 25Premium
- Final step: 6 full mock exams135 questions each, timed like test day. Pass them, then book your exam.Premium
Read the complete ASNT 9712 Level III MT study notes for “MT Principles, Theory and Demagnetization”
Our first full set of comprehensive notes, about 15 minutes of reading: Fields and flaw orientation · Current types and depth · Developing techniques and POD · Choosing demagnetization, a worked exam example, the traps examiners use and a one-minute recap. Create a free account to read it and see how premium notes work before you decide.
Study tools included
3,000 practice questions
3,000 exam-style questions per exam, organized topic by topic in sets of 25. Every answer explained, with the rule it comes from.
6 full mock exams
6 full-length timed mock exams per exam, with real question counts and time limits, so test day feels like practice day.
Exam Readiness Score
One 0 to 100 number that tells you when you're ready to book. Reach 80 and you're covered by our Pass Guarantee.
800 flashcards + spaced repetition
800 flashcards per exam, in a deck for each topic, that come back right before you'd forget them. Five minutes a day keeps every number fresh.
60 comprehensive key notes
60 key notes per exam, split across its topics and each explained in full: the concepts, worked exam examples, the traps examiners use and a quick recap. Your first set is free with an account.
Mind maps
See the whole exam on one screen: every topic and the facts under it.
Sample questions with answers
These are the questions in the free test above, with answers. Try the test first. You'll learn more by getting some wrong.
1. A Level III runs a hit/miss probability of detection study for a new MT technique on cracked specimens. Which result is normally quoted as the technique's reliable detection capability?
2. After a central conductor shot, a gear's field indicator reads close to zero, but the gear later attracts swarf strongly during machining. What should the demagnetization procedure specify?
3. Repair welds must be checked for cracks between passes while the steel is at about 180 °C (356 °F). Which inspection medium should the Level III select?
4. During the periodic check of a bench unit, its ammeter reads 1,800 A while a calibrated reference shunt shows 2,100 A. The written equipment program allows ±10% of the reference reading. What should the Level III do?
5. MT of a closed-die forged connecting rod shows a sharp, curving indication along the flash line where metal has folded over onto the surface. What is it most likely to be?
6. A broad MT indication lies along the toe of a weld cap with a sharp notch-like profile. The Level III must decide whether it is a toe crack or a geometry effect. What is the best way to confirm?
7. A Level III reviewing an MT report for approval wants to be sure the examination could be repeated by someone else. Which content is most important for that?
8. A purchaser specifies weld quality level B to ISO 5817 but gives no MT acceptance level. Where should the Level III find the corresponding MT acceptance level?
9. A technique sheet based on ISO 9934-1 requires a tangential field of at least 2 kA/m. On a yoke qualification plate, a Hall probe reads 1.4 kA/m midway between the poles. What should be done?
10. Prod magnetization is proposed for final MT of welds in quenched and tempered high-strength steel. What is the main concern the Level III should raise?
11. A Level III is planning an ASNT 9712 training course for Level II MT candidates. What minimum Level II MT training does the ASNT 9712 program require?
12. A 9712 Level III MT candidate scores 72% on Basic, 68% on the MT Method exam and 81% on Procedure Preparation in a first attempt. What happens next?
13. An ASNT 9712 certified individual's last near-vision test was 14 months ago. What is the position under the ASNT 9712 program?
14. A welding specification for high-strength steel requires a hold time before final MT of the welds. What is the main reason for this hold?
15. In the Procedure Preparation exam, a candidate's MT procedure lists the yoke and detection medium but says nothing about checking them before use. Which Table D.3 area loses marks?
Get the full ASNT 9712 Level III MT prep
Premium Monthly
- One ASNT Level III exam of your choice: Basic, UT, RT or MT
- 3,000 practice questions + 6 full mock exams per exam
- 800 flashcards + 60 key notes per exam, by topic, plus mind maps
- Spaced repetition + mistakes bank
- Readiness Score & detailed reports
- Video lessons as they release
- Content updates during your access
- 5 bonuses: NDT formula sheet, discontinuity atlas, study planner and more
- Pass Guarantee: complete the prep, pass or 100% back
Renews monthly until you cancel. Cancel in two clicks from your account; you keep access until the end of the month you've paid for. No minimum term.
Premium Yearly
- One ASNT Level III exam of your choice: Basic, UT, RT or MT
- 3,000 practice questions + 6 full mock exams per exam
- 800 flashcards + 60 key notes per exam, by topic, plus mind maps
- Spaced repetition + mistakes bank
- Readiness Score & detailed reports
- Video lessons as they release
- Content updates during your access
- 5 bonuses: NDT formula sheet, discontinuity atlas, study planner and more
- Pass Guarantee: complete the prep, pass or 100% back
Renews once a year until you cancel. We email you before each renewal. Cancel any time from your account; you keep access until the end of the year you've paid for.
ASNT 9712 Level III MT exam FAQ
How many questions are on the ASNT 9712 Level III MT exam?
Four written elements: Basic 135 multiple-choice items, Basic Supplemental 55, MT Method 90, and Procedure Preparation (writing a complete MT procedure to a supplied standard). Bench and yoke practical exams are also required, with a time limit of 12 hours of written exams: basic 4 hours, basic supplemental 2 hours, mt method 2 hours, procedure preparation 4 hours. Format: computer-based with an on-screen calculator. iso 9712 allows the codes part of the method exam and the procedure preparation exam to be open book, with aids specified by asnt; asnt's candidate pages do not list the aids, so confirm with asnt. procedure preparation is a written procedure, not multiple choice; practice here uses 4-option items. this prep covers only the written parts, not the hands-on bench and yoke practicals.
What is the passing score for ASNT 9712 Level III MT?
At least 70% on every written exam and at least 80% on practical exams (ASNT 9712 Program Document Rev 02). The Procedure Preparation exam is marked against ASNT's weighting table (Table D.3).
How much does the ASNT 9712 Level III MT exam cost?
Without an ASNT NDT Level III: MT method fee US$1,190 for members / US$1,350 for nonmembers (includes Basic and Basic Supplemental) plus the practicals and Procedure Preparation package US$1,460 / US$1,655, so US$2,650 / US$3,005 in total. ASNT NDT Level III holders pay US$1,460 / US$1,655 plus US$120 for Basic Supplemental. Retakes: Method US$455 / US$535, Procedure Preparation US$560 / US$655, each practical US$500 / US$590. ASNT fees differ for members and nonmembers and can change, so confirm on the ASNT certification website before you apply.
Which languages is the ASNT 9712 Level III MT exam offered in?
English only (an online NDT terminology dictionary covers Korean, Mandarin, Spanish, UK English and Arabic).
Where do I take the ASNT 9712 Level III MT exam?
Written exams at Pearson VUE test centers or ASNT Authorized Exam Centers (computer-based); practical exams (bench and yoke) only at Authorized Exam Centers.
Is this ASNT 9712 Level III MT practice test free?
Yes. The 15-question practice test on this page is free, with an explanation for every answer and no signup. A free account also unlocks the complete study notes for the first topic. The full ASNT 9712 Level III MT prep is Premium at $147 a month for this exam.
What's in the premium ASNT 9712 Level III MT prep?
3,000 practice questions organized topic by topic (MT Principles, Theory and Demagnetization: 450; MT Equipment and Materials: 425; Interpreting, Evaluating and Documenting MT Results: 425; MT Codes, Standards, Procedures and Techniques: 425; MT Training and Certification Programs: 425; Basic and Basic Supplemental: ISO 9712, Materials and Other Methods: 425; Procedure Preparation (Item F): 425), 6 full-length timed mock exams of 135 questions, 800 flashcards and 60 comprehensive key notes split across all 7 topics, plus a mistakes bank and the Readiness Score.
Related practice tests
ASNT NDT Level II, Liquid Penetrant Testing (PT)
ASNT's third-party written certification for liquid penetrant technicians: a 50-item General exam and a 40-item Specific exam for the general industry or pressure equipment sector.
ASNT NDT Level II, Radiographic Testing (RT)
ASNT's third-party written certification for radiographic technicians: a 50-item General exam and a 40-item Specific exam for the general industry or pressure equipment sector.
ASNT NDT Level II, Ultrasonic Testing (UT)
ASNT's third-party written certification for ultrasonic technicians: a 50-item General exam and a 40-item Specific exam for the general industry or pressure equipment sector.
Exam details are summarized from the official candidate information available in October 2026. ASNT changes formats and fees, so confirm with ASNT Certification Services LLC (American Society for Nondestructive Testing) before you book. NDTLevel3Exam is not affiliated with ASNT or Pearson VUE.