Try the full study dashboard free, no signup: practice, flashcards and your Exam Readiness Score. Open it →
Home / Study guides / ASNT 9712 Level III MT
Study guide · Last updated November 2026

ASNT 9712 Level III MT Exam Study Guide (2026)

Everything the ASNT 9712 Level III Magnetic Particle Testing (MT), written parts tests, topic by topic: what each section covers, the facts that come up most, and how to study it. Pair it with the free 15-question practice test.

The exam at a glance

QuestionsFour written elements: Basic 135 multiple-choice items, Basic Supplemental 55, MT Method 90, and Procedure Preparation (writing a complete MT procedure to a supplied standard). Bench and yoke practical exams are also required
Time12 hours of written exams: Basic 4 hours, Basic Supplemental 2 hours, MT Method 2 hours, Procedure Preparation 4 hours
Passing scoreAt least 70% on every written exam and at least 80% on practical exams (ASNT 9712 Program Document Rev 02). The Procedure Preparation exam is marked against ASNT's weighting table (Table D.3)
FormatComputer-based with an on-screen calculator. ISO 9712 allows the codes part of the Method exam and the Procedure Preparation exam to be open book, with aids specified by ASNT; ASNT's candidate pages do not list the aids, so confirm with ASNT. Procedure Preparation is a written procedure, not multiple choice; practice here uses 4-option items. This prep covers only the written parts, not the hands-on bench and yoke practicals
Certifying bodyASNT Certification Services LLC (American Society for Nondestructive Testing)
Test providerWritten exams at Pearson VUE test centers or ASNT Authorized Exam Centers (computer-based); practical exams (bench and yoke) only at Authorized Exam Centers

Mind map: the whole exam on one screen

ASNT 9712 Level III MT
MT Principles, Theory and Demagnetization
a90/95Why a ring's circular residual field reads near zeroHow to demagnetize a contained circular fieldCurrent type best for near-surface flaws
MT Equipment and Materials
ISO 3059 UV-A minimum for fluorescent MTISO 3059 ambient light limit for fluorescent viewingISO 3059 minimum illuminance for color contrast MTMedium for hot surfaces
Interpreting, Evaluating and Documenting MT Results
Typical location of a forging lapDefinition of a linear indicationIndication caused by a part touching another magnetized partHow to confirm a weld toe indication
MT Codes, Standards, Procedures and Techniques
7 key facts
MT Training and Certification Programs
7 key facts
Basic and Basic Supplemental: ISO 9712, Materials and Other Methods
7 key facts
Procedure Preparation (Item F)
7 key facts
Free with an account

Read the complete ASNT 9712 Level III MT study notes for “MT Principles, Theory and Demagnetization”

Our first full set of comprehensive notes, about 15 minutes of reading: Fields and flaw orientation · Current types and depth · Developing techniques and POD · Choosing demagnetization, a worked exam example, the traps examiners use and a one-minute recap. Create a free account to read it and see how premium notes work before you decide.

Open the free dashboard

1. MT Principles, Theory and Demagnetization

MT method exam domain 1 (90 items, 2 hours): develop or evaluate new MT techniques, prepare technical demonstrations, assist in POD studies and select demagnetization methods. ASNT does not publish domain weights.

Key facts

  • Indications form where a discontinuity crosses the flux and creates leakage that attracts particles; best detection is with the flaw at 90° to the field, poor below about 45°.
  • Circular fields come from current through the part or a central conductor; longitudinal fields from coils and yokes.
  • AC concentrates flux at the surface (skin effect) for surface cracks; rectified DC and half-wave DC give deeper penetration for near-surface flaws.
  • POD studies plot detection probability against flaw size and quote a90/95 (90% POD at 95% confidence) using hit/miss or signal-response data.
  • Circular residual fields in closed shapes are contained and read near zero on a field meter; convert them to longitudinal before demagnetizing.
  • Demagnetization uses a reversing field that decreases to zero; DC methods reach deeper residual fields than AC because AC is surface-limited.
  • Heating above the Curie temperature (about 770 °C for iron) fully demagnetizes but is rarely practical.

Flashcards

a90/95Flaw size detected with 90% probability at 95% confidence.
Why a ring's circular residual field reads near zeroThe field is fully contained in the part, with no external leakage.
How to demagnetize a contained circular fieldOverride it with a stronger longitudinal field, then demagnetize longitudinally.
Current type best for near-surface flawsHalf-wave rectified DC (especially with dry powder).

Exam tip: Level III theory questions usually ask you to choose or defend a technique. Always state the field direction first, then which flaws it finds.

2. MT Equipment and Materials

MT method exam domain 2: evaluate new equipment, select equipment and inspection media, and manage the equipment maintenance program, including calibration intervals and media checks.

Key facts

  • Equipment checks include ammeter accuracy against a calibrated shunt, timer checks, yoke lift tests and light meter calibration.
  • An instrument out of tolerance is removed from service and the work done since the last good check is assessed.
  • Wet fluorescent particles give the highest sensitivity for fine surface cracks; dry powders suit rough or hot surfaces and near-surface flaws.
  • Media are only used within the temperature range stated by the manufacturer; wet suspensions and contrast paints have low limits.
  • ISO 9934-2 covers detection media and ISO 9934-3 covers equipment; ASTM E1444 and E709 give U.S. requirements.
  • Viewing per ISO 3059: fluorescent needs UV-A of at least 10 W/m² (1,000 µW/cm²) with ambient light of 20 lx or less; color contrast needs at least 500 lx.
  • Bath checks include concentration (settling test), contamination and, for fluorescent media, brightness against a retained sample.

Flashcards

ISO 3059 UV-A minimum for fluorescent MT10 W/m² (1,000 µW/cm²).
ISO 3059 ambient light limit for fluorescent viewing20 lx or less.
ISO 3059 minimum illuminance for color contrast MT500 lx.
Medium for hot surfacesDry powder rated by its maker for that temperature.

Exam tip: Equipment questions test the program, not just the device. Ask what happens to the work done before a failed check.

3. Interpreting, Evaluating and Documenting MT Results

MT method exam domain 3: determine flaw type by material and product form, confirm interpretations, verify evaluation against acceptance criteria, and review and approve MT reports.

Key facts

  • Castings: hot tears, shrinkage and cold shuts. Forgings: laps, bursts and flakes. Rolled products: seams and laminations. Welds: cracks, lack of fusion and porosity.
  • Laps form where metal folds over in forging, often at the flash line, giving sharp curved indications at a shallow angle.
  • Non-relevant indications come from section changes, magnetic writing, permeability changes and weld boundaries between dissimilar metals.
  • Confirm doubtful indications by removing the cause (dressing geometry, demagnetizing and retesting) or by another method.
  • Linear indications are those with length more than three times width in ISO 23278 and ASME Section VIII.
  • Reports must allow the test to be repeated: procedure, magnetization technique and values, field check, media, viewing conditions and results.
  • The Level III reviews and approves reports, confirming the acceptance criteria applied are the ones the contract requires.

Flashcards

Typical location of a forging lapAlong the flash line or a section change.
Definition of a linear indicationLength more than three times its width.
Indication caused by a part touching another magnetized partMagnetic writing (non-relevant).
How to confirm a weld toe indicationDress the toe smooth and re-examine.

Exam tip: Link each flaw to how the product was made. If a question says forging, casting or rolled bar, that is the biggest clue.

Test yourself on these topics

Take the free 15-question ASNT 9712 Level III MT test, then save your results to unlock your Readiness Score and the mistakes bank.

Start the free test

4. MT Codes, Standards, Procedures and Techniques

MT method exam domain 4: interpret code MT requirements, review client requirements, determine acceptance criteria, develop procedures and approve technique sheets. Covers ISO 9934-1, ISO 17638, ISO 23278, ISO 17635, ASTM E709/E1444 and ASME Section V.

Key facts

  • ISO 9934-1 sets general MT principles; a tangential field of about 2 kA/m is the usual target, verified by measurement or indicators.
  • ISO 17638 covers MT of welds, including two examinations at roughly 90° to each other for full flaw-orientation coverage.
5 more key facts, 9 key notes, 115 flashcards and 425 practice questions for this topic are in premium.

Flashcards

ISO standard for MT of weldsISO 17638.

Exam tip: When a question names ISO 5817, think ISO 17635 for the link and ISO 23278 for the MT acceptance level.

5. MT Training and Certification Programs

MT method exam domain 5: manage qualification and certification programs, develop training, write and proctor exams, run program audits and evaluate personnel performance.

Key facts

  • ASNT 9712 MT training: 5 days for Level II and a further 4 days for Level III; a day is at least 7 hours and can be accumulated.
  • ASNT 9712 Level III MT experience: 180 days with higher education and Level II, 240 days with Level II, 360 days for direct access with higher education.
5 more key facts, 8 key notes, 115 flashcards and 425 practice questions for this topic are in premium.

Flashcards

ASNT 9712 Level II MT training5 days.

Exam tip: Exam-rule questions are easy marks if you learn the numbers in one table: training days, experience days, pass marks and retake waits.

6. Basic and Basic Supplemental: ISO 9712, Materials and Other Methods

The Basic exam (135 items, 4 hours) covers NDT certification, application of methods, training, materials and codes. The Basic Supplemental (55 items, 2 hours) adds materials and processes, the ASNT 9712 certification system and Level II knowledge of MT, PT, RT, UT and VT.

Key facts

  • Holders of a valid Level III certificate are exempt from retaking the Basic exam; ASNT NDT Level III holders add only the Basic Supplemental.
  • Near vision (Jaeger J1 or N4.5 at not less than 30 cm) is checked at certification and annually; color vision within the previous five years.
5 more key facts, 8 key notes, 115 flashcards and 425 practice questions for this topic are in premium.

Flashcards

ASNT 9712 near-vision requirementJ1 or N4.5 at not less than 30 cm, annually.

Exam tip: The Basic Supplemental rewards reading the ASNT 9712 Program Document. Know its definitions, vision rules and suspension grounds.

7. Procedure Preparation (Item F)

A 4-hour computer-based exam in which you write a complete MT procedure to a supplied standard. ASNT marks it against Table D.3: general 8%, personnel 2%, materials and equipment 20%, test piece 5%, performance of the test 40%, acceptance criteria 7%, post-test 3%, report 5%, presentation 10%.

Key facts

  • Performance of the test is 40%: techniques, setting up the equipment, conducting the test and characterizing discontinuities, 10% each.
  • Materials and equipment is 20%: main equipment with verification status and pre-test checks, and ancillary items such as indicators, media and meters.
5 more key facts, 8 key notes, 110 flashcards and 425 practice questions for this topic are in premium.

Flashcards

Largest Table D.3 sectionPerformance of the test, 40%.

Exam tip: Write to the marking scheme: use the Table D.3 headings as your section headings so nothing worth marks is left out.

How to pass

  • If you already hold ASNT NDT Level III in MT, the new work is the 55-item Basic Supplemental (ISO 9712 rules) and the 4-hour Procedure Preparation exam. Put your time there.
  • The MT method exam is written around Level III tasks: POD studies, choosing demagnetization, approving reports and technique sheets, and running training and exams. Expect decisions, not definitions.
  • For Procedure Preparation, practise writing full procedures against an ISO or ASTM MT standard. Performance of the test carries 40% of the marks and equipment 20% in ASNT's Table D.3.
  • ASNT says revised exam topics are rolling out for several methods. Check the 9712 Level III exam page for MT changes before you book.

Frequently asked questions

How long should I study for the ASNT 9712 Level III MT exam?

Most working candidates need 4 to 8 weeks at 45 to 60 minutes a day. Book your exam once your Readiness Score has stayed at 80 or higher for about a week.

Can I take the ASNT 9712 Level III MT exam online?

No. ASNT NDT Level III exams are taken in person, on a computer, at Pearson VUE test centers or ASNT Authorized Exam Centers. Format: computer-based with an on-screen calculator. iso 9712 allows the codes part of the method exam and the procedure preparation exam to be open book, with aids specified by asnt; asnt's candidate pages do not list the aids, so confirm with asnt. procedure preparation is a written procedure, not multiple choice; practice here uses 4-option items. this prep covers only the written parts, not the hands-on bench and yoke practicals. Check ASNT's current exam information for the rules.

What score do I need to pass the ASNT 9712 Level III MT exam?

At least 70% on every written exam and at least 80% on practical exams (ASNT 9712 Program Document Rev 02). The Procedure Preparation exam is marked against ASNT's weighting table (Table D.3). The exam has four written elements: basic 135 multiple-choice items, basic supplemental 55, mt method 90, and procedure preparation (writing a complete mt procedure to a supplied standard). bench and yoke practical exams are also required and a time limit of 12 hours of written exams: basic 4 hours, basic supplemental 2 hours, mt method 2 hours, procedure preparation 4 hours.

What are the most tested topics?

The outline covers mt principles, theory and demagnetization, mt equipment and materials, interpreting, evaluating and documenting mt results, mt codes, standards, procedures and techniques, mt training and certification programs, basic and basic supplemental: iso 9712, materials and other methods, procedure preparation (item f). Use the free practice test to see which ones you need most.

The premium ASNT 9712 Level III MT study path

Premium ASNT 9712 Level III MT prep is studied one topic at a time. Each step starts with that topic's key notes and flashcard deck, then its own question sets of 25, so you master one topic before you move to the next. When every topic is strong, the 6 full mock exams show you're ready.

3,000practice questions, every answer explained
6full-length mock exams, 135 questions each, timed
800flashcards with spaced repetition, sorted by topic
60comprehensive key notes across 7 topics

Your step-by-step study path

  1. 1
    MT Principles, Theory and Demagnetization9 key notes, 115 flashcards, then 450 practice questions in 18 sets of 25
    Notes free with an account
  2. 2
    MT Equipment and Materials9 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  3. 3
    Interpreting, Evaluating and Documenting MT Results9 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  4. 4
    MT Codes, Standards, Procedures and Techniques9 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  5. 5
    MT Training and Certification Programs8 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  6. 6
    Basic and Basic Supplemental: ISO 9712, Materials and Other Methods8 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  7. 7
    Procedure Preparation (Item F)8 key notes, 110 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  8. Final step: 6 full mock exams135 questions each, timed like test day. Pass them, then book your exam.
    Premium

Get every note, flashcard and question

Most popular · cancel anytime

Premium Monthly

$147/month
per exam
About $4.83 a day · less than a retake fee, for the certification that lets you approve procedures and certify technicians
  • One ASNT Level III exam of your choice: Basic, UT, RT or MT
  • 3,000 practice questions + 6 full mock exams per exam
  • 800 flashcards + 60 key notes per exam, by topic, plus mind maps
  • Spaced repetition + mistakes bank
  • Readiness Score & detailed reports
  • Video lessons as they release
  • Content updates during your access
  • 5 bonuses: NDT formula sheet, discontinuity atlas, study planner and more
  • Pass Guarantee: complete the prep, pass or 100% back

Renews monthly until you cancel. Cancel in two clicks from your account; you keep access until the end of the month you've paid for. No minimum term.

Best value · 3 months free

Premium Yearly

$1,323/year
per exam
Pay for 9 months, get 12. Save $441 against paying monthly.
  • One ASNT Level III exam of your choice: Basic, UT, RT or MT
  • 3,000 practice questions + 6 full mock exams per exam
  • 800 flashcards + 60 key notes per exam, by topic, plus mind maps
  • Spaced repetition + mistakes bank
  • Readiness Score & detailed reports
  • Video lessons as they release
  • Content updates during your access
  • 5 bonuses: NDT formula sheet, discontinuity atlas, study planner and more
  • Pass Guarantee: complete the prep, pass or 100% back

Renews once a year until you cancel. We email you before each renewal. Cancel any time from your account; you keep access until the end of the year you've paid for.

Pass Guarantee. Complete the full prep, sit your exam within 60 days, and if you don't pass we refund 100% of your subscription payments. See the requirements
Secure checkout by Stripe Card, Apple Pay, Google Pay Pass Guarantee

Summarized from ASNT's official candidate information and the rules cited, checked October 2026. Confirm current requirements with ASNT Certification Services LLC (American Society for Nondestructive Testing).

Start the free test