PCN Level 3 (PCN24/GEN and method appendices): free practice test
BINDT's ISO 9712 Level 3 certification: a multiple-choice basic examination (Parts A, B and C) followed by a main method examination (Parts D, E and F) for each method and sector. Each part has a 70% pass mark, and certificates are valid for five years. This prep covers only the multiple-choice knowledge parts and background for Part F; it does not cover assessed procedure drafting or the Level 2 practical.
Watch the free 4:32 video lesson: the key PCN Level 3 (PCN24/GEN) concepts →
Premium: 3,000 practice questions, 6 full mock exams, 800 flashcards and 60 comprehensive key notes, topic by topic. See the study path ·
- Lesson 2: Steelmaking, alloying and carbon equivalentHow composition and the IIW carbon equivalent predict hardenability and cracking risk.
- Lesson 3: Heat treatment and its effect on microstructureAnnealing, normalising, hardening, tempering and stress relief, and what each changes.
- Lesson 4: Welding processes and weld discontinuitiesPorosity, slag, lack of fusion, cracks and how each process creates them.
- Lesson 5: Castings: shrinkage, porosity, cold shuts and hot tearsHow casting flaws form, where they sit and which method finds them.
- Lesson 6: Wrought products: laminations, laps, seams and burstsForming defects in plate, forgings and bar, with orientation and detection.
- Lesson 7: In-service damage: fatigue, creep and corrosionMechanisms, typical locations and NDT selection for each damage type.
- Lesson 8: Level 3 duties and PCN24 scheme structureWhat a Level 3 may authorise, and how PCN24/GEN and its appendices fit.
- Lesson 9: Training, experience and vision requirementsMinimum training days, Level 3 experience routes and annual vision checks.
- Lesson 10: Examinations, re-examination and certificate validityPass rules, retake limits, basic result validity, renewal and recertification.
- Lesson 11: Ultrasonic testing at Level 2 standardWave modes, velocity, skip distance, calibration and flaw detection for Part C.
- Lesson 12: Radiographic testing at Level 2 standardExposure, unsharpness, IQIs, film and digital imaging, and radiation safety.
- Lesson 13: Magnetic particle and penetrant testing at Level 2Field directions, viewing conditions, penetrant process steps and their traps.
- Lesson 14: Eddy current and visual testing at Level 2Depth of penetration, lift-off, impedance basics and visual access and lighting.
- Lesson 15: Level 3 UT: beam theory and Snell's lawNear field, beam spread, refraction and mode conversion with worked calculations.
- Lesson 16: Level 3 UT: TOFD, phased array and TFMHow advanced techniques work, where they beat pulse-echo and their limits.
- Lesson 17: Level 3 RT: exposure design and image qualityExposure charts, source and energy selection, contrast, definition and IQI sensitivity.
- Lesson 18: Level 3 surface methods: technique selectionChoosing MT, PT, ET or VT, magnetisation calculations and sensitivity control.
- Lesson 19: Validating techniques and reporting resultsHow a Level 3 proves a technique works and what a report must contain.
- Lesson 20: Weld NDT standards: ISO 17635 and testing levelsLinking ISO 5817 quality levels to method choice, testing and acceptance levels.
- Lesson 21: Acceptance standards for UT, RT, MT and PTISO 11666, 10675-1, 23278 and 23277 applied to real indications.
- Lesson 22: Writing an NDT procedure that can be repeatedScope, equipment, sensitivity, coverage, acceptance and reporting, section by section.
- Lesson 23: Critical review of an existing NDT procedureFinding technical and editorial gaps the way a Part F examiner does.
Keep going after the free lesson. Every topic gets its own lesson, plus the full question bank, timed simulations and study tools.
About the PCN Level 3 (PCN24/GEN) exam
BINDT's ISO 9712 Level 3 certification: a multiple-choice basic examination (Parts A, B and C) followed by a main method examination (Parts D, E and F) for each method and sector. Each part has a 70% pass mark, and certificates are valid for five years. This prep covers only the multiple-choice knowledge parts and background for Part F; it does not cover assessed procedure drafting or the Level 2 practical.
What's on the exam
Each branch is a topic in the official outline. Members see every key fact on the full mind map. Read the free study guide →
How to pass the PCN Level 3 (PCN24/GEN) exam
- Part C is the largest part, at 60 questions from four methods you choose. At least one must be volumetric (UT or RT), so choose the methods you know best and check them with your AQB.
- Each part is graded separately at 70%. A strong average cannot rescue a weak Part B, and Part B has only 10 questions, so memorise PCN24/GEN.
- BINDT's own documents differ on timing. Confirm minutes per question and Part F time with your AQB, and practise at the shorter allowance.
- Passing the basic exam stays valid only if your first main method examination is passed within five years, so plan your Parts D, E and F early.
Save your results and get your Readiness Score
Create a free account after the test: your score by topic, a mistakes bank, the complete study notes for the first topic, flashcards and the NDT Level III Formula Sheet.
What's in the premium PCN Level 3 (PCN24/GEN) prep
Premium PCN Level 3 (PCN24/GEN) prep is studied one topic at a time. Each step starts with that topic's key notes and flashcard deck, then its own question sets of 25, so you master one topic before you move to the next. When every topic is strong, the 6 full mock exams show you're ready.
Your step-by-step study path
- 1Part A: Materials and Product Technology9 key notes, 115 flashcards, then 450 practice questions in 18 sets of 25Notes free with an account
- 2Part B: PCN24 Qualification and Certification9 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25Premium
- 3Part C: Volumetric Methods at Level 2 Standard (UT and RT)9 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25Premium
- 4Part C: Surface and Electromagnetic Methods (MT, PT, VT, ET)9 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25Premium
- 5Part D: Level 3 Method Knowledge8 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25Premium
- 6Part E: Codes, Standards and Sector Application8 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25Premium
- 7Part F: NDT Procedure Drafting8 key notes, 110 flashcards, then 425 practice questions in 17 sets of 25Premium
- Final step: 6 full mock exams100 questions each, timed like test day. Pass them, then book your exam.Premium
Read the complete PCN Level 3 (PCN24/GEN) study notes for “Part A: Materials and Product Technology”
Our first full set of comprehensive notes, about 18 minutes of reading: Steels and microstructure · Welding discontinuities · Casting discontinuities · Wrought and in-service discontinuities, a worked exam example, the traps examiners use and a one-minute recap. Create a free account to read it and see how premium notes work before you decide.
Study tools included
3,000 practice questions
3,000 exam-style questions per exam, organized topic by topic in sets of 25. Every answer explained, with the rule it comes from.
6 full mock exams
6 full-length timed mock exams per exam, with real question counts and time limits, so test day feels like practice day.
Exam Readiness Score
One 0 to 100 number that tells you when you're ready to book. Reach 80 and you're covered by our Pass Guarantee.
800 flashcards + spaced repetition
800 flashcards per exam, in a deck for each topic, that come back right before you'd forget them. Five minutes a day keeps every number fresh.
60 comprehensive key notes
60 key notes per exam, split across its topics and each explained in full: the concepts, worked exam examples, the traps examiners use and a quick recap. Your first set is free with an account.
Mind maps
See the whole exam on one screen: every topic and the facts under it.
Sample questions with answers
These are the questions in the free test above, with answers. Try the test first. You'll learn more by getting some wrong.
1. A specification requires a delay of 48 hours after welding before final UT of a butt weld in 30 mm carbon-manganese steel. What is the main reason for this delay?
2. An irregular, jagged-walled cavity is found near a heavy section junction in a steel casting, at the last point to solidify. Which discontinuity is this most likely to be?
3. A steel has C 0.20, Mn 1.20, Cr 0.15, Mo 0.05, V 0.00, Ni 0.30 and Cu 0.15 (all wt%). Using the IIW formula CE = C + Mn/6 + (Cr+Mo+V)/5 + (Ni+Cu)/15, what is the carbon equivalent?
4. A candidate scores 85% in Part A, 65% in Part B and 90% in Part C of the basic examination. Under PCN24/GEN, what is the position?
5. A holder of valid PCN Level 3 RT (Welds) applies for PCN Level 3 RT (Castings). Under PCN24/GEN, which parts are exempt?
6. A 60-degree shear wave probe is used on a 20 mm steel plate. Ignoring the probe index, what is the full skip distance along the surface?
7. A radiograph is taken with a 3 mm source, 600 mm from source to object and 25 mm from object to film. What is the geometric unsharpness?
8. A single-V butt weld is radiographed with the beam perpendicular to the plate. Which imperfection is most likely to be missed?
9. A steel shaft is magnetised in a coil so that the magnetic field runs along its length. Which discontinuity orientation does this set-up detect best?
10. A fluorescent penetrant viewing booth measures 8 W/m2 UV-A at the inspection surface and 15 lx ambient visible light. How does this compare with ISO 3059?
11. In eddy current testing, the test frequency is increased by a factor of 4 on the same material. What happens to the standard depth of penetration?
12. A 4 MHz compression probe with a 10 mm diameter crystal is used on steel with a velocity of 5,960 m/s. What is the near-field length, using N = D squared / (4 x wavelength)?
13. A radiographic exposure of 20 Ci-min at 600 mm gives the required density. The source is now 10 Ci and the source-to-film distance is increased to 900 mm. What exposure time is needed for the same density?
14. A contract calls for ultrasonic testing of steel butt welds to BS EN ISO 17640. Which standard gives the ultrasonic acceptance levels for welds?
15. A draft UT procedure for butt welds states probe types, scanning pattern and reporting level, but gives no method for setting sensitivity and no reference reflector. What is the main consequence?
Get the full PCN Level 3 (PCN24/GEN) prep
Premium Monthly
- One ASNT Level III exam of your choice: Basic, UT, RT or MT
- 3,000 practice questions + 6 full mock exams per exam
- 800 flashcards + 60 key notes per exam, by topic, plus mind maps
- Spaced repetition + mistakes bank
- Readiness Score & detailed reports
- Video lessons as they release
- Content updates during your access
- 5 bonuses: NDT formula sheet, discontinuity atlas, study planner and more
- Pass Guarantee: complete the prep, pass or 100% back
Renews monthly until you cancel. Cancel in two clicks from your account; you keep access until the end of the month you've paid for. No minimum term.
Premium Yearly
- One ASNT Level III exam of your choice: Basic, UT, RT or MT
- 3,000 practice questions + 6 full mock exams per exam
- 800 flashcards + 60 key notes per exam, by topic, plus mind maps
- Spaced repetition + mistakes bank
- Readiness Score & detailed reports
- Video lessons as they release
- Content updates during your access
- 5 bonuses: NDT formula sheet, discontinuity atlas, study planner and more
- Pass Guarantee: complete the prep, pass or 100% back
Renews once a year until you cancel. We email you before each renewal. Cancel any time from your account; you keep access until the end of the year you've paid for.
PCN Level 3 (PCN24/GEN) exam FAQ
How many questions are on the PCN Level 3 (PCN24/GEN) exam?
Basic: at least 100 multiple-choice questions (Part A 30, Part B 10, Part C 60 made up of 15 for each of four methods). Main method: Part D 30 and Part E 20 multiple-choice questions, plus Part F drafting of one or more NDT procedures, with a time limit of pcn24/gen issue 4 sets 3 minutes per question for the basic exam (100 questions, 5 hours), 90 minutes for part d, 60 minutes for part e and 6 hours for part f. pcn24/gen/app/ut issue 3 gives 2 minutes per question for parts a, c and d, 3 minutes for parts b and e, and recommends 4 hours per part f procedure. these differ, so confirm the time with your aqb. Format: parts a to d are multiple choice with no outside material (candidates may hold only what the centre provides). part e may be open book for codes, standards and specifications. for part f the applicable codes are provided. this prep covers only the multiple-choice knowledge parts and background for part f. it does not cover drafting assessment or the level 2 practical required of candidates without current level 2 certification.
What is the passing score for PCN Level 3 (PCN24/GEN)?
70% in each examination part (A, B, C, D, E and F), with no averaging between parts. The former distinction grade was removed under PCN24. The basic exam must be passed before Part D onward is graded.
How much does the PCN Level 3 (PCN24/GEN) exam cost?
PCN24/PSL35 for 2026: examination fee for written exams conducted directly by BINDT GBP 236.00 ex VAT (GBP 283.20 inc VAT); PCN certification admin charge and examination levy GBP 95.00 ex VAT (GBP 114.00 inc VAT); PED admin charge GBP 50.00 ex VAT (GBP 60.00 inc VAT). A 20% administration charge applies to overseas invoices. Fees charged by AQBs are not published by BINDT; confirm with your AQB. ASNT fees differ for members and nonmembers and can change, so confirm on the ASNT certification website before you apply.
Which languages is the PCN Level 3 (PCN24/GEN) exam offered in?
Not published by BINDT as a list; PCN24/GEN allows up to 25% extra time for candidates whose first language is not the examination language. Confirm the language with your AQB.
Where do I take the PCN Level 3 (PCN24/GEN) exam?
BINDT or BINDT Authorised Qualifying Bodies and examination centres (paper-based or e-assessment, invigilated). Availability is listed in PCN24/PSL04.
Is this PCN Level 3 (PCN24/GEN) practice test free?
Yes. The 15-question practice test on this page is free, with an explanation for every answer and no signup. A free account also unlocks the complete study notes for the first topic. The full PCN Level 3 (PCN24/GEN) prep is Premium at $147 a month for this exam.
What's in the premium PCN Level 3 (PCN24/GEN) prep?
3,000 practice questions organized topic by topic (Part A: Materials and Product Technology: 450; Part B: PCN24 Qualification and Certification: 425; Part C: Volumetric Methods at Level 2 Standard (UT and RT): 425; Part C: Surface and Electromagnetic Methods (MT, PT, VT, ET): 425; Part D: Level 3 Method Knowledge: 425; Part E: Codes, Standards and Sector Application: 425; Part F: NDT Procedure Drafting: 425), 6 full-length timed mock exams of 100 questions, 800 flashcards and 60 comprehensive key notes split across all 7 topics, plus a mistakes bank and the Readiness Score.
Related practice tests
Exam details are summarized from the official candidate information available in October 2026. ASNT changes formats and fees, so confirm with British Institute of Non-Destructive Testing (BINDT), Certification Services (PCN scheme) before you book. NDTLevel3Exam is not affiliated with ASNT or Pearson VUE.