ASNT NDT Level II VT Exam Study Guide (2026)
Everything the ASNT NDT Level II, Visual Testing (VT) tests, topic by topic: what each section covers, the facts that come up most, and how to study it. Pair it with the free 15-question practice test.
The exam at a glance
| Questions | 90 multiple-choice questions over two exams: General 50 and Specific 40 (General Industry or Pressure Equipment sector). ASNT forms can include unscored pretest items |
|---|---|
| Time | 4 hours in total: 2 hours for the General exam and 2 hours for the Specific exam |
| Passing score | Not published for this program (the program document says exams are graded by accepted psychometric principles). ASNT says its exams are typically in the 70% to 80% range; aim for 80% or higher in practice and confirm with ASNT |
| Format | Computer-based with an on-screen calculator. ASNT's exam pages do not state the reference-material rules, so confirm them with ASNT. This prep covers only the written General and Specific exams; visual acuity, practical and job-specific exams are carried out by the employer |
| Certifying body | ASNT Certification Services LLC (American Society for Nondestructive Testing) |
| Test provider | Pearson VUE test centers and ASNT Authorized Exam Centers (in person, computer-based, no walk-ins) |
Mind map: the whole exam on one screen
Read the complete ASNT NDT Level II VT study notes for “VT Principles and Theory”
Our first full set of comprehensive notes, about 12 minutes of reading: What VT can and cannot do · The eye and vision · Light and contrast · Magnification · Oversight of VT personnel, a worked exam example, the traps examiners use and a one-minute recap. Create a free account to read it and see how premium notes work before you decide.
1. VT Principles and Theory
First domain of the General exam outline in effect after 18 October 2026: applying the principles of VT and training and overseeing VT personnel. ASNT does not publish percentage weights for Level II topics.
Key facts
- VT detects surface conditions that can be seen, with or without aids. It cannot see below the surface and can miss tight cracks closed by smeared metal or coating.
- Cones, concentrated in the fovea, give detail and color in bright light. Rods, outside the fovea, dominate in dim light and give no color.
- Peak eye sensitivity in bright light is at about 555 nm (yellow-green).
- Inverse square law: illuminance E = I ÷ d². Doubling the distance gives a quarter of the light. 1 fc is about 10.76 lx.
- Detection depends on size, contrast, lighting, surface condition and viewing time. Low-angle light raises contrast on surface relief; shiny surfaces need glare control.
- Simple magnifier power is about 10 ÷ focal length in inches. Lens power in diopters is 1 ÷ focal length in meters.
- Field of view and depth of field both shrink as magnification rises.
- A Level II provides on-the-job guidance and oversight for trainees and Level I personnel.
Flashcards
Exam tip: Most principle questions combine one number with one effect. Write the inverse square and magnifier formulas on your note board before starting.
2. VT Equipment and Materials
Covers setting up and characterizing equipment, confirming working order, verifying calibration and white light intensity, keeping inventory, and keeping the work area clean and orderly. No percentage weight is published.
Key facts
- Rigid borescopes give a sharp image through a straight access path; flexible fiberscopes and videoprobes go around bends.
- A fiberscope has a coherent image bundle, whose fibers keep their position, and a separate light guide bundle, which need not be coherent.
- Direction of view (forward, side or oblique) is not the same as field of view, which is the angular width seen.
- Weld gauges: fillet leaf gauges check leg size and contour, bridge cam gauges check undercut, reinforcement and angle, and hi-lo gauges check internal misalignment.
- Calipers and micrometers are verified with traceable gage blocks. A failed check means removing the tool and reviewing work since the last good check.
- White light is verified at the examination surface with a calibrated meter, not at the lamp or from its rated output.
- Equipment and consumables, including abrasives and cleaning supplies, are kept in inventory and in working order.
Flashcards
Exam tip: When an equipment question gives a failed check, the answer is rarely a quick correction. Think remove from use, then review earlier work.
3. VT Techniques and Surface Preparation
Covers selecting direct or remote technique, conducting surface preparation and conducting visual inspections. No percentage weight is published.
Key facts
- Direct VT under ASME Section V Article 9: eye within 24 in (600 mm) of the surface at an angle of at least 30°. Mirrors can help achieve this.
- Minimum illumination under Article 9 is 100 fc (1,000 lx) at the examination surface.
- Remote VT uses aids such as borescopes and cameras, and must have resolution at least equal to direct visual observation.
- Translucent VT uses artificial light directed through the part, for example on fiber-reinforced materials.
- Clean only as needed to see the surface. Don't smear, peen or grind away features under examination.
- Use tools dedicated to stainless steel on stainless steel to avoid iron contamination.
- Welds are checked before, during and after welding: fit-up and preheat, root and interpass passes, then the completed weld.
Flashcards
Exam tip: Check both limits on direct VT questions: 24 in and 30°. Examiners often make one value right and the other wrong.
Test yourself on these topics
Take the free 15-question ASNT NDT Level II VT test, then save your results to unlock your Readiness Score and the mistakes bank.
4. Interpreting, Evaluating and Documenting Results
Covers characterizing indications, determining surface finish, sizing visual indications, accepting or rejecting specimens, recording test data and reporting findings. No percentage weight is published.
Key facts
- An indication is what the examination shows; a discontinuity is an interruption in the material; a defect is a discontinuity that fails the acceptance criteria.
- Weld discontinuities visible at the surface include undercut, overlap, porosity, crater cracks, underfill and arc strikes.
Flashcards
Exam tip: Answer in the right order: identify the condition, size it, compare with the criteria, then record it. Questions often test which step comes next.
5. Codes, Standards, Specifications and Procedures
Covers complying with written procedures, such as manufacturing processes, and writing work instructions. No percentage weight is published.
Key facts
- SNT-TC-1A is a recommended practice. The employer's written practice sets how its personnel are qualified and certified.
- A code sets the requirements, a procedure says how they are met on the job, and a work instruction gives step-by-step directions.
Flashcards
Exam tip: Separate the documents in your head: code, procedure, work instruction, written practice. Many wrong options quote the right rule from the wrong document.
6. Safety and Health Standards
Covers applying environmentally sound work practices, applying safety protocols and disposing of soiled consumables. No percentage weight is published.
Key facts
- OSHA hazard communication requires labels and Safety Data Sheets (SDS) for hazardous chemicals such as cleaners and solvents.
- Permit-required confined space entry needs air testing first; oxygen below 19.5% or above 23.5% is hazardous.
Flashcards
Exam tip: The safest option is usually to stop until the hazard is controlled. Be wary of options that protect only against part of the hazard.
7. Specific Exam: Codes, Applications and Techniques
The 40-item, 2-hour Specific exam is offered for the General Industry or Pressure Equipment sector and covers codes, applications and techniques. ASNT publishes no further split.
Key facts
- You sit the Specific exam for one sector at first and can add the other sector for US$370 / US$410.
- Under AWS D1.1 Table 8.1, cracks are not allowed. Undercut and porosity limits vary with thickness, loading and direction of stress.
Flashcards
Exam tip: In Specific questions the stem decides the answer. Underline thickness, loading, weld length and the governing code before you look at the options.
How to pass
- Study the revised VT topics in effect since 18 October 2026. Older study lists are organized around vision, lighting and optics, which now sit inside a broader job-task outline.
- ASNT publishes topic lists but no percentage weights for Level II, so give all six General domains time, including safety and work instructions.
- Each exam gives 2 hours, so General allows 2.4 minutes per item and Specific 3 minutes. Spend the extra Specific time checking each answer against the exact wording of the code or procedure.
- Practice the short calculations by hand: inverse square law, magnifier power, footcandle to lux conversion and comparison sizing on a video image.
Frequently asked questions
How long should I study for the ASNT NDT Level II VT exam?
Most working candidates need 4 to 8 weeks at 45 to 60 minutes a day. Book your exam once your Readiness Score has stayed at 80 or higher for about a week.
Can I take the ASNT NDT Level II VT exam online?
No. ASNT NDT Level III exams are taken in person, on a computer, at Pearson VUE test centers or ASNT Authorized Exam Centers. Format: computer-based with an on-screen calculator. asnt's exam pages do not state the reference-material rules, so confirm them with asnt. this prep covers only the written general and specific exams; visual acuity, practical and job-specific exams are carried out by the employer. Check ASNT's current exam information for the rules.
What score do I need to pass the ASNT NDT Level II VT exam?
Not published for this program (the program document says exams are graded by accepted psychometric principles). ASNT says its exams are typically in the 70% to 80% range; aim for 80% or higher in practice and confirm with ASNT. The exam has 90 multiple-choice questions over two exams: general 50 and specific 40 (general industry or pressure equipment sector). asnt forms can include unscored pretest items and a time limit of 4 hours in total: 2 hours for the general exam and 2 hours for the specific exam.
What are the most tested topics?
The outline covers vt principles and theory, vt equipment and materials, vt techniques and surface preparation, interpreting, evaluating and documenting results, codes, standards, specifications and procedures, safety and health standards, specific exam: codes, applications and techniques. Use the free practice test to see which ones you need most.
The premium ASNT NDT Level II VT study path
Premium ASNT NDT Level II VT prep is studied one topic at a time. Each step starts with that topic's key notes and flashcard deck, then its own question sets of 25, so you master one topic before you move to the next. When every topic is strong, the 6 full mock exams show you're ready.
Your step-by-step study path
- 1VT Principles and Theory9 key notes, 115 flashcards, then 450 practice questions in 18 sets of 25Notes free with an account
- 2VT Equipment and Materials9 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25Premium
- 3VT Techniques and Surface Preparation9 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25Premium
- 4Interpreting, Evaluating and Documenting Results9 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25Premium
- 5Codes, Standards, Specifications and Procedures8 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25Premium
- 6Safety and Health Standards8 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25Premium
- 7Specific Exam: Codes, Applications and Techniques8 key notes, 110 flashcards, then 425 practice questions in 17 sets of 25Premium
- Final step: 6 full mock exams90 questions each, timed like test day. Pass them, then book your exam.Premium
Get every note, flashcard and question
Premium Monthly
- One ASNT Level III exam of your choice: Basic, UT, RT or MT
- 3,000 practice questions + 6 full mock exams per exam
- 800 flashcards + 60 key notes per exam, by topic, plus mind maps
- Spaced repetition + mistakes bank
- Readiness Score & detailed reports
- Video lessons as they release
- Content updates during your access
- 5 bonuses: NDT formula sheet, discontinuity atlas, study planner and more
- Pass Guarantee: complete the prep, pass or 100% back
Renews monthly until you cancel. Cancel in two clicks from your account; you keep access until the end of the month you've paid for. No minimum term.
Premium Yearly
- One ASNT Level III exam of your choice: Basic, UT, RT or MT
- 3,000 practice questions + 6 full mock exams per exam
- 800 flashcards + 60 key notes per exam, by topic, plus mind maps
- Spaced repetition + mistakes bank
- Readiness Score & detailed reports
- Video lessons as they release
- Content updates during your access
- 5 bonuses: NDT formula sheet, discontinuity atlas, study planner and more
- Pass Guarantee: complete the prep, pass or 100% back
Renews once a year until you cancel. We email you before each renewal. Cancel any time from your account; you keep access until the end of the year you've paid for.
Summarized from ASNT's official candidate information and the rules cited, checked October 2026. Confirm current requirements with ASNT Certification Services LLC (American Society for Nondestructive Testing).