Try the full study dashboard free, no signup: practice, flashcards and your Exam Readiness Score. Open it →
Home / Study guides / RT Level III
Study guide · Last updated November 2026

RT Level III Exam Study Guide (2026)

Everything the ASNT NDT Level III Radiographic Testing (RT) Exam tests, topic by topic: what each section covers, the facts that come up most, and how to study it. Pair it with the free 15-question practice test.

The exam at a glance

Questions135 multiple-choice questions (some are unscored pretest items)
Time4 hours
Passing scoreNot published per exam. Aim for 80% or higher in practice (ASNT says its criterion-referenced cut scores are typically 70% to 80%)
FormatClosed book, computer-based, with an on-screen calculator
Certifying bodyASNT Certification Services LLC (American Society for Nondestructive Testing)
Test providerPearson VUE test centers and ASNT Authorized Exam Centers (in person, computer-based)

Mind map: the whole exam on one screen

RT Level III
Radiation Physics and Sources
Ir-192 half-lifeCo-60 half-life and energiesWhat does kV control?What does mA control?
Equipment, Film and Digital Detectors
Finer-grain filmLead screen functionsCR detectorDR detector
Exposure Calculations and Geometry
Exposure time versus distanceFilm density formulaDensity 2.0 transmitsGeometric unsharpness
Image Quality and Technique Development
6 key facts
Interpretation and Evaluation
6 key facts
Radiation Safety and Regulations
6 key facts
Codes, Procedures and RT Program Management
6 key facts
Free with an account

Read the complete RT Level III study notes for “Radiation Physics and Sources”

Our first full set of comprehensive notes, about 15 minutes of reading: X-ray sources · Gamma sources · Decay calculations · Interaction with matter · Attenuation, HVL and TVL, a worked exam example, the traps examiners use and a one-minute recap. Create a free account to read it and see how premium notes work before you decide.

Open the free dashboard

1. Radiation Physics and Sources

X-ray generation, gamma isotopes, decay and the interaction of radiation with matter. Decay calculations and isotope facts are reliable exam points.

Key facts

  • X-rays come from electrons striking a target: kV sets the energy spectrum (penetration), mA sets the intensity.
  • Gamma rays come from radioactive decay. Common isotopes: Ir-192 (half-life about 74 days, about 0.2 to 0.6 MeV), Co-60 (about 5.27 years, 1.17 and 1.33 MeV), Se-75 (about 120 days, lower energy).
  • Decay: A = A0 × (1/2)^(t ÷ T½). Specific activity (Ci per gram) affects source size: higher specific activity means a smaller source for the same activity.
  • Interactions: photoelectric absorption (dominant at low energy), Compton scattering (dominant in the industrial range) and pair production (above 1.02 MeV).
  • Attenuation: I = I0 e^(−μx). The half-value layer (HVL) halves intensity; the tenth-value layer (TVL) cuts it to one tenth.
  • Scattered radiation lowers contrast; it is controlled with lead screens, masking, collimation and filters.

Flashcards

Ir-192 half-lifeAbout 74 days.
Co-60 half-life and energiesAbout 5.27 years; 1.17 and 1.33 MeV.
What does kV control?Energy (penetrating power) and contrast.
What does mA control?Intensity only.

Exam tip: For decay questions, count half-lives first. If the time isn't a whole number of half-lives, use the formula with the calculator.

2. Equipment, Film and Digital Detectors

X-ray tubes and gamma cameras, film types and screens, processing, and computed (CR) and digital (DR) radiography.

Key facts

  • Smaller focal spots give sharper images; tube rating limits kV and mA, and duty cycle limits exposure length.
  • Gamma exposure devices (cameras) use guide tubes and a drive cable; the source must be surveyed back into the shielded position after every exposure.
  • Film speed rises with grain size: faster films need less exposure but give coarser grain and lower definition.
  • Lead screens intensify by emitting electrons and filter scatter; fluorescent screens emit light and cut exposure but reduce definition.
  • Film processing: develop, stop, fix, wash, dry. Developer temperature and time control density and must follow the manufacturer's data.
  • CR uses reusable phosphor imaging plates read by a laser scanner; DR uses flat-panel detectors read directly. Digital image quality is judged by signal-to-noise ratio and spatial resolution.

Flashcards

Finer-grain filmSlower speed, better definition.
Lead screen functionsIntensification and scatter filtering.
CR detectorReusable photostimulable phosphor imaging plate.
DR detectorFlat-panel detector read out directly.

Exam tip: In film-versus-speed questions, every gain in speed costs definition. Pick the option that trades them that way.

3. Exposure Calculations and Geometry

Inverse square law, exposure factors, film density and geometric unsharpness. Expect several of these on every RT exam.

Key facts

  • Intensity varies inversely with the square of distance: I1 ÷ I2 = D2² ÷ D1².
  • Exposure time varies with the square of distance: T2 = T1 × (D2 ÷ D1)².
  • Reciprocity: for film, exposure = intensity × time (mA × min or Ci × min) gives the same density.
  • Density D = log10 (I0 ÷ It): D 1.0 transmits 10%, D 2.0 transmits 1%, D 3.0 transmits 0.1%.
  • Geometric unsharpness Ug = F × t ÷ d (F source size, t object-to-film distance, d source-to-object distance).
  • To reduce Ug: smaller source, longer source-to-object distance, film closer to the part.

Flashcards

Exposure time versus distanceT2 = T1 × (D2 ÷ D1)².
Film density formulaD = log10 (incident ÷ transmitted light).
Density 2.0 transmits1% of the light.
Geometric unsharpnessUg = F × t ÷ d.

Exam tip: Check which distance a question gives: source-to-film or source-to-object. Ug needs source-to-object; the exposure law needs source-to-film.

Test yourself on these topics

Take the free 15-question RT Level III test, then save your results to unlock your Readiness Score and the mistakes bank.

Start the free test

4. Image Quality and Technique Development

Contrast, definition and sensitivity, IQIs, and choosing techniques for plate, pipe and complex shapes.

Key facts

  • Radiographic contrast = subject contrast (part, energy, scatter) × film contrast; definition depends on geometric, film and screen unsharpness.
  • Hole-type IQIs (ASTM E1025): sensitivity written as plaque thickness percentage and hole size, for example 2-2T. Wire IQIs (ASTM E747): the smallest visible wire.
4 more key facts, 9 key notes, 115 flashcards and 425 practice questions for this topic are in premium.

Flashcards

2-2T meansPlaque 2% of part thickness, with the 2T hole visible.

Exam tip: Keep contrast and definition separate. Energy and scatter affect contrast; geometry and grain affect definition.

5. Interpretation and Evaluation

Recognizing weld and casting discontinuities and film artifacts on radiographs, and evaluating them against acceptance criteria.

Key facts

  • Dark (higher density) images: porosity, slag, incomplete penetration, lack of fusion, cracks, undercut, burn-through.
  • Light (lower density) images: tungsten inclusions, excess penetration, spatter, weld reinforcement.
4 more key facts, 8 key notes, 115 flashcards and 425 practice questions for this topic are in premium.

Flashcards

Tungsten inclusion appearanceA light, sharply defined spot.

Exam tip: Ask 'denser or less dense than steel?' Anything denser images light; voids and lighter inclusions image dark.

6. Radiation Safety and Regulations

Time, distance and shielding, dose limits, area definitions and the US NRC rules for industrial radiography (10 CFR Parts 20 and 34).

Key facts

  • Time, distance, shielding: dose = rate × time; rate falls with the square of distance; shielding cuts it by half per HVL.
  • Occupational dose limit (10 CFR 20): 5 rem (0.05 Sv) total effective dose equivalent per year for adults. Members of the public: 0.1 rem (1 mSv) per year.
4 more key facts, 8 key notes, 115 flashcards and 425 practice questions for this topic are in premium.

Flashcards

Occupational annual dose limit (US)5 rem (0.05 Sv) TEDE.

Exam tip: For boundary-distance questions, the answer scales with the square root of the rate ratio, so 40 times less rate needs about 6.3 times the distance.

7. Codes, Procedures and RT Program Management

Applying ASME Section V Article 2 and other codes, writing techniques, auditing film quality and safety, and running RT training and certification.

Key facts

  • ASME Section V Article 2 covers RT technique requirements: IQI selection and placement, density limits for film, location markers, backscatter checks and geometric unsharpness.
  • IQIs go on the source side; if inaccessible, on the film side with a lead letter 'F' next to them.
4 more key facts, 8 key notes, 110 flashcards and 425 practice questions for this topic are in premium.

Flashcards

IQI placement when source side is inaccessibleFilm side, with a lead letter 'F'.

Exam tip: Code questions on the exam test common rules, not edition-specific numbers. Learn the principle behind each rule and you'll recognize the answer.

How to pass

  • Exposure math is reliable points: inverse square law, source decay, exposure factor and geometric unsharpness. Practice them until each takes under a minute.
  • Know the isotopes cold: Ir-192 half-life about 74 days, Co-60 about 5.27 years, Se-75 about 120 days, and which steel thickness each suits.
  • The revised outline puts more weight on the Level III role: approving techniques, auditing film quality and radiation safety, and setting acceptance criteria when none exist.
  • Radiation safety questions use US NRC terms (radiation area, high radiation area, alarming ratemeters). Learn the definitions word for word.

Frequently asked questions

How long should I study for the RT Level III exam?

Most working candidates need 4 to 8 weeks at 45 to 60 minutes a day. Book your exam once your Readiness Score has stayed at 80 or higher for about a week.

Can I take the RT Level III exam online?

No. ASNT NDT Level III exams are taken in person, on a computer, at Pearson VUE test centers or ASNT Authorized Exam Centers. Format: closed book, computer-based, with an on-screen calculator. Check ASNT's current exam information for the rules.

What score do I need to pass the RT Level III exam?

Not published per exam. Aim for 80% or higher in practice (ASNT says its criterion-referenced cut scores are typically 70% to 80%). The exam has 135 multiple-choice questions (some are unscored pretest items) and a time limit of 4 hours.

What are the most tested topics?

The outline covers radiation physics and sources, equipment, film and digital detectors, exposure calculations and geometry, image quality and technique development, interpretation and evaluation, radiation safety and regulations, codes, procedures and rt program management. Use the free practice test to see which ones you need most.

The premium RT Level III study path

Premium RT Level III prep is studied one topic at a time. Each step starts with that topic's key notes and flashcard deck, then its own question sets of 25, so you master one topic before you move to the next. When every topic is strong, the 6 full mock exams show you're ready.

3,000practice questions, every answer explained
6full-length mock exams, 135 questions each, timed
800flashcards with spaced repetition, sorted by topic
60comprehensive key notes across 7 topics

Your step-by-step study path

  1. 1
    Radiation Physics and Sources9 key notes, 115 flashcards, then 450 practice questions in 18 sets of 25
    Notes free with an account
  2. 2
    Equipment, Film and Digital Detectors9 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  3. 3
    Exposure Calculations and Geometry9 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  4. 4
    Image Quality and Technique Development9 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  5. 5
    Interpretation and Evaluation8 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  6. 6
    Radiation Safety and Regulations8 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  7. 7
    Codes, Procedures and RT Program Management8 key notes, 110 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  8. Final step: 6 full mock exams135 questions each, timed like test day. Pass them, then book your exam.
    Premium

Get every note, flashcard and question

Most popular · cancel anytime

Premium Monthly

$147/month
per exam
About $4.83 a day · less than a retake fee, for the certification that lets you approve procedures and certify technicians
  • One ASNT Level III exam of your choice: Basic, UT, RT or MT
  • 3,000 practice questions + 6 full mock exams per exam
  • 800 flashcards + 60 key notes per exam, by topic, plus mind maps
  • Spaced repetition + mistakes bank
  • Readiness Score & detailed reports
  • Video lessons as they release
  • Content updates during your access
  • 5 bonuses: NDT formula sheet, discontinuity atlas, study planner and more
  • Pass Guarantee: complete the prep, pass or 100% back

Renews monthly until you cancel. Cancel in two clicks from your account; you keep access until the end of the month you've paid for. No minimum term.

Best value · 3 months free

Premium Yearly

$1,323/year
per exam
Pay for 9 months, get 12. Save $441 against paying monthly.
  • One ASNT Level III exam of your choice: Basic, UT, RT or MT
  • 3,000 practice questions + 6 full mock exams per exam
  • 800 flashcards + 60 key notes per exam, by topic, plus mind maps
  • Spaced repetition + mistakes bank
  • Readiness Score & detailed reports
  • Video lessons as they release
  • Content updates during your access
  • 5 bonuses: NDT formula sheet, discontinuity atlas, study planner and more
  • Pass Guarantee: complete the prep, pass or 100% back

Renews once a year until you cancel. We email you before each renewal. Cancel any time from your account; you keep access until the end of the year you've paid for.

Pass Guarantee. Complete the full prep, sit your exam within 60 days, and if you don't pass we refund 100% of your subscription payments. See the requirements
Secure checkout by Stripe Card, Apple Pay, Google Pay Pass Guarantee

Summarized from ASNT's official candidate information and the rules cited, checked October 2026. Confirm current requirements with ASNT Certification Services LLC (American Society for Nondestructive Testing).

Start the free test