Try the full study dashboard free, no signup: practice, flashcards and your Exam Readiness Score. Open it →
Home / Study guides / ASNT 9712 Level II PT
Study guide · Last updated November 2026

ASNT 9712 Level II PT Exam Study Guide (2026)

Everything the ASNT 9712 Level II, Liquid Penetrant Testing (PT), written parts tests, topic by topic: what each section covers, the facts that come up most, and how to study it. Pair it with the free 15-question practice test.

The exam at a glance

Questions110 written items over three computer-based elements: General 50, Specific 40 (Pre- and In-Service) and Instruction Preparation 20. A practical exam (post-emulsifiable, solvent-removable or water-washable, 2 parts) is also required
Time5 hours of written exams: General 2 hours, Specific 2 hours, Instruction Preparation 1 hour. Practicals add 1.5 hours (post-emulsifiable or water-washable) or 1 hour (solvent-removable) each
Passing scoreAt least 70% on each written element (General, Specific and Instruction Preparation) and at least 80% on each practical specimen
FormatComputer-based with an on-screen calculator. ASNT's candidate pages do not state the reference-material rules, so confirm them with ASNT. Instruction Preparation uses multiple-choice and multiple-response items. This prep covers only the written parts, with 4-option practice items; it does not cover the hands-on practical exam
Certifying bodyASNT Certification Services LLC (American Society for Nondestructive Testing)
Test providerWritten exams at Pearson VUE test centers or ASNT Authorized Exam Centers (computer-based); practical exams only at Authorized Exam Centers

Mind map: the whole exam on one screen

ASNT 9712 Level II PT
Review of PT Principles
Force that pulls penetrant into a flawHow developer helps make flaws visibleWavelength of UV-A commonly used for fluorescent PTMain limitation of PT
Selection of the Appropriate PT Method
ASTM E1417 Type IIMethod D in ASTM E1417Highest sensitivity level for fluorescent penetrantASTM E1417 developer Form a
PT Processing Steps and Materials
Maximum Article 6 water-wash pressureArticle 6 minimum dwell for weldsArticle 6 dwell at 40 to 50 °FEmulsifier applied without a water prerinse
Inspection and Evaluation of Indications
7 key facts
Inspection Procedures and Standards
7 key facts
Specific Exam: Pre- and In-Service Applications
6 key facts
Instruction Preparation
6 key facts
Free with an account

Read the complete ASNT 9712 Level II PT study notes for “Review of PT Principles”

Our first full set of comprehensive notes, about 12 minutes of reading: What PT can and cannot do · Capillary action and wetting · Viscosity and temperature · Developer action · Fluorescent and visible penetrants, a worked exam example, the traps examiners use and a one-minute recap. Create a free account to read it and see how premium notes work before you decide.

Open the free dashboard

1. Review of PT Principles

The first of four General exam topics listed by ASNT for PT: how penetrants work and what limits the method. ASNT publishes no percentage weights.

Key facts

  • PT finds discontinuities open to the surface on nonporous materials. It does not find subsurface flaws.
  • Capillary action draws penetrant into flaws; low surface contact angle (good wetting) helps entry.
  • Viscosity affects the rate of penetration more than the ability to enter a flaw.
  • Developer draws penetrant from flaws by reverse capillary action and gives a contrasting background.
  • Fluorescent penetrants glow under UV-A at about 365 nm and give higher contrast than visible dye.
  • Heavily porous surfaces give excessive background and are not suited to PT.
  • Cold temperatures slow penetration; hot surfaces can dry or degrade penetrant.

Flashcards

Force that pulls penetrant into a flawCapillary action.
How developer helps make flaws visibleIt draws penetrant out and gives a contrasting background.
Wavelength of UV-A commonly used for fluorescent PTAbout 365 nm.
Main limitation of PTIt finds only flaws open to the surface.

Exam tip: Keep wetting and viscosity apart: wetting decides whether penetrant can enter, viscosity decides how fast.

2. Selection of the Appropriate PT Method

The second General exam topic: choosing penetrant type, removal method, sensitivity and developer for a given part and setting.

Key facts

  • Type I is fluorescent and Type II is visible dye.
  • Method A is water-washable, B is lipophilic post-emulsifiable, C is solvent-removable and D is hydrophilic post-emulsifiable.
  • ASTM E1417 sensitivity levels for fluorescent penetrants run 1/2, 1, 2, 3 and 4, with 4 the highest.
  • Developer forms: a dry powder, b water-soluble, c water-suspendable, d nonaqueous for Type I, e nonaqueous for Type II, f special application.
  • Solvent-removable kits suit field work and small areas; they are slower over large areas.
  • Water-washable systems suit rough surfaces and large part counts, but overwashing can remove penetrant from shallow flaws.
  • Post-emulsifiable systems give the best control over removal and suit fine, shallow flaws.

Flashcards

ASTM E1417 Type IIVisible dye.
Method D in ASTM E1417Hydrophilic post-emulsifiable.
Highest sensitivity level for fluorescent penetrantLevel 4.
ASTM E1417 developer Form aDry powder.

Exam tip: Read the job limits first: water, power, darkness, part surface and flaw size usually eliminate two options quickly.

3. PT Processing Steps and Materials

Covers cleaning, penetrant application, dwell, removal and development, which fall under ASNT's PT topics on selection and procedures. Numbers below follow ASME Section V Article 6.

Key facts

  • Standard temperature range is 40 to 125 °F (5 to 52 °C). A nonstandard temperature needs a qualified procedure.
  • Article 6 minimum dwell is 5 minutes for castings and welds and 10 minutes for wrought forms such as plate and forgings. From 40 to 50 °F, use twice the listed dwell.
  • Penetrant must not dry during the dwell; if it dries, the examination is voided and must be repeated from cleaning.
  • Water-wash limits: 50 psi or less and 110 °F (43 °C) or less.
  • Lipophilic emulsifier goes on directly after the dwell; hydrophilic emulsifier is applied after a water prerinse.
  • Mechanical cleaning such as blasting can smear flaws closed, and etching may be needed to reopen them.
  • Don't flush solvent over the part after the dwell, because it can remove penetrant from flaws.

Flashcards

Maximum Article 6 water-wash pressure50 psi (350 kPa).
Article 6 minimum dwell for welds5 minutes.
Article 6 dwell at 40 to 50 °FTwice the listed minimum.
Emulsifier applied without a water prerinseLipophilic.

Exam tip: Process questions often hide a skipped step. Walk through clean, dry, apply, dwell, remove, develop, interpret, post-clean.

Test yourself on these topics

Take the free 15-question ASNT 9712 Level II PT test, then save your results to unlock your Readiness Score and the mistakes bank.

Start the free test

4. Inspection and Evaluation of Indications

The third General exam topic listed by ASNT for PT: lighting and viewing conditions and evaluation of indications.

Key facts

  • Article 6 final interpretation is not less than 10 minutes and not more than 60 minutes after the developer is dry, unless bleed-out does not alter the results.
  • Fluorescent work needs UV-A of at least 1,000 µW/cm² at the surface, a darkened area and at least 5 minutes of eye adaptation.
5 more key facts, 9 key notes, 115 flashcards and 425 practice questions for this topic are in premium.

Flashcards

Eye adaptation time before fluorescent PTAt least 5 minutes.

Exam tip: An indication's shape suggests a cause, but the location, the process history and the part's service tell you which is most likely.

5. Inspection Procedures and Standards

The fourth General exam topic: working to written procedures and applying standards such as ASME Section V Article 6, ASTM E165 and ASTM E1417.

Key facts

  • Article 6 says how to examine. Acceptance criteria come from the referencing code, such as Section VIII Division 1 Appendix 8.
  • Appendix 8: indications over 1/16 in are relevant; linear means a length greater than three times the width.
5 more key facts, 8 key notes, 115 flashcards and 425 practice questions for this topic are in premium.

Flashcards

Appendix 8 rule for four or more rounded indications in a lineReject if within 1/16 in of each other, edge to edge.

Exam tip: Find the document that governs the question first, then apply the rule. Acceptance almost never comes from Article 6.

6. Specific Exam: Pre- and In-Service Applications

The 40-item, 2-hour Specific exam covers codes, applications and techniques for the single ASNT 9712 Pre- and In-Service sector, including manufacturing, castings, forgings and welds.

Key facts

  • Fluorescent PT must not follow color contrast PT on the same surface under Article 6.
  • Article 6 requires certified contaminant content: sulfur for nickel-base alloys, and chlorine plus fluorine for austenitic and duplex stainless steels and titanium.
4 more key facts, 8 key notes, 115 flashcards and 425 practice questions for this topic are in premium.

Flashcards

Contaminant certified for austenitic stainless steelTotal chlorine and fluorine.

Exam tip: Check the material in the stem before answering. Alloy family decides contaminant limits and sometimes the process itself.

7. Instruction Preparation

A separate 20-item, 1-hour computer-based element with multiple-choice and multiple-response items, testing the creation of a written instruction. Weighting: foreword 5%, personnel 5%, equipment and media 5%, product 10%, test conditions 10%, detailed instructions 40%, recording and classifying results 20%, reporting 5%.

Key facts

  • A PT instruction gives the exact process steps, including materials and times, for one test.
  • The largest share of the weighting, 40%, is for detailed instructions and settings.
4 more key facts, 8 key notes, 110 flashcards and 425 practice questions for this topic are in premium.

Flashcards

Items and time for the PT Instruction Preparation element20 items in 1 hour.

Exam tip: Test each line of your instruction by asking whether a Level I could carry it out without making a decision.

How to pass

  • ASNT lists four General topics for PT and no percentage weights, so split your time evenly across principles, selection, evaluation and procedures.
  • Know the ASME Section V Article 6 numbers and how each is triggered: 40 to 125 °F, dwell minimums by product form, and the 10 to 60 minute interpretation window.
  • Each written element has its own 70% minimum. Treat the 1-hour Instruction Preparation element as a separate exam, not an afterthought.
  • Learn the process order for each method by heart. Many questions turn on which step comes next or which step has been skipped.

Frequently asked questions

How long should I study for the ASNT 9712 Level II PT exam?

Most working candidates need 4 to 8 weeks at 45 to 60 minutes a day. Book your exam once your Readiness Score has stayed at 80 or higher for about a week.

Can I take the ASNT 9712 Level II PT exam online?

No. ASNT NDT Level III exams are taken in person, on a computer, at Pearson VUE test centers or ASNT Authorized Exam Centers. Format: computer-based with an on-screen calculator. asnt's candidate pages do not state the reference-material rules, so confirm them with asnt. instruction preparation uses multiple-choice and multiple-response items. this prep covers only the written parts, with 4-option practice items; it does not cover the hands-on practical exam. Check ASNT's current exam information for the rules.

What score do I need to pass the ASNT 9712 Level II PT exam?

At least 70% on each written element (General, Specific and Instruction Preparation) and at least 80% on each practical specimen. The exam has 110 written items over three computer-based elements: general 50, specific 40 (pre- and in-service) and instruction preparation 20. a practical exam (post-emulsifiable, solvent-removable or water-washable, 2 parts) is also required and a time limit of 5 hours of written exams: general 2 hours, specific 2 hours, instruction preparation 1 hour. practicals add 1.5 hours (post-emulsifiable or water-washable) or 1 hour (solvent-removable) each.

What are the most tested topics?

The outline covers review of pt principles, selection of the appropriate pt method, pt processing steps and materials, inspection and evaluation of indications, inspection procedures and standards, specific exam: pre- and in-service applications, instruction preparation. Use the free practice test to see which ones you need most.

The premium ASNT 9712 Level II PT study path

Premium ASNT 9712 Level II PT prep is studied one topic at a time. Each step starts with that topic's key notes and flashcard deck, then its own question sets of 25, so you master one topic before you move to the next. When every topic is strong, the 6 full mock exams show you're ready.

3,000practice questions, every answer explained
6full-length mock exams, 110 questions each, timed
800flashcards with spaced repetition, sorted by topic
60comprehensive key notes across 7 topics

Your step-by-step study path

  1. 1
    Review of PT Principles9 key notes, 115 flashcards, then 450 practice questions in 18 sets of 25
    Notes free with an account
  2. 2
    Selection of the Appropriate PT Method9 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  3. 3
    PT Processing Steps and Materials9 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  4. 4
    Inspection and Evaluation of Indications9 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  5. 5
    Inspection Procedures and Standards8 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  6. 6
    Specific Exam: Pre- and In-Service Applications8 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  7. 7
    Instruction Preparation8 key notes, 110 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  8. Final step: 6 full mock exams110 questions each, timed like test day. Pass them, then book your exam.
    Premium

Get every note, flashcard and question

Most popular · cancel anytime

Premium Monthly

$147/month
per exam
About $4.83 a day · less than a retake fee, for the certification that lets you approve procedures and certify technicians
  • One ASNT Level III exam of your choice: Basic, UT, RT or MT
  • 3,000 practice questions + 6 full mock exams per exam
  • 800 flashcards + 60 key notes per exam, by topic, plus mind maps
  • Spaced repetition + mistakes bank
  • Readiness Score & detailed reports
  • Video lessons as they release
  • Content updates during your access
  • 5 bonuses: NDT formula sheet, discontinuity atlas, study planner and more
  • Pass Guarantee: complete the prep, pass or 100% back

Renews monthly until you cancel. Cancel in two clicks from your account; you keep access until the end of the month you've paid for. No minimum term.

Best value · 3 months free

Premium Yearly

$1,323/year
per exam
Pay for 9 months, get 12. Save $441 against paying monthly.
  • One ASNT Level III exam of your choice: Basic, UT, RT or MT
  • 3,000 practice questions + 6 full mock exams per exam
  • 800 flashcards + 60 key notes per exam, by topic, plus mind maps
  • Spaced repetition + mistakes bank
  • Readiness Score & detailed reports
  • Video lessons as they release
  • Content updates during your access
  • 5 bonuses: NDT formula sheet, discontinuity atlas, study planner and more
  • Pass Guarantee: complete the prep, pass or 100% back

Renews once a year until you cancel. We email you before each renewal. Cancel any time from your account; you keep access until the end of the year you've paid for.

Pass Guarantee. Complete the full prep, sit your exam within 60 days, and if you don't pass we refund 100% of your subscription payments. See the requirements
Secure checkout by Stripe Card, Apple Pay, Google Pay Pass Guarantee

Summarized from ASNT's official candidate information and the rules cited, checked October 2026. Confirm current requirements with ASNT Certification Services LLC (American Society for Nondestructive Testing).

Start the free test