ASNT NDT Level II PT Exam Study Guide (2026)
Everything the ASNT NDT Level II, Liquid Penetrant Testing (PT) tests, topic by topic: what each section covers, the facts that come up most, and how to study it. Pair it with the free 15-question practice test.
The exam at a glance
| Questions | Two multiple-choice exams: General 50 items and Specific 40 items (general industry or pressure equipment sector) |
|---|---|
| Time | General 2 hours; Specific 2 hours (4 hours in total) |
| Passing score | Not published by ASNT for this exam. ASNT says its criterion-referenced cut scores are typically 70% to 80%. Both the General and the Specific exam must be passed, so aim for 80% or higher on each in practice |
| Format | Computer-based multiple choice with a scientific calculator provided by ASNT. ASNT does not publish whether any reference is supplied during these exams; confirm with ASNT. This prep covers only the written General and Specific exams, not the employer's visual acuity, practical or job-specific exams |
| Certifying body | ASNT Certification Services LLC (American Society for Nondestructive Testing) |
| Test provider | Pearson VUE test centers and ASNT Authorized Exam Centers (in person, computer-based, no walk-ins) |
Mind map: the whole exam on one screen
Read the complete ASNT NDT Level II PT study notes for “PT Principles and Capillary Action”
Our first full set of comprehensive notes, about 12 minutes of reading: What PT can and cannot do · Capillary action · Properties of a good penetrant · Reverse capillary action and developers · Fluorescent and visible contrast, a worked exam example, the traps examiners use and a one-minute recap. Create a free account to read it and see how premium notes work before you decide.
1. PT Principles and Capillary Action
Maps to ASNT's first PT General topic, Review PT Principles. ASNT publishes no percentage weights for PT. Expect the physics of how penetrant enters and leaves a discontinuity, and what the method cannot find.
Key facts
- PT finds discontinuities open to the surface of nonporous materials. Subsurface flaws and porous parts are outside the method.
- Capillary pressure rises with surface tension and the cosine of the contact angle, and rises as the opening gets narrower.
- A contact angle below 90 degrees means the liquid wets the surface; above 90 degrees capillary forces push it out.
- Viscosity controls how fast penetrant enters and drains, not whether it can enter.
- Developer forms a fine porous layer that draws penetrant back out by reverse capillary action and gives a contrasting background.
- An indication is wider than the discontinuity that caused it because penetrant spreads in the developer.
Flashcards
Exam tip: When a question compares two openings, go back to the capillary relationship: narrower means higher driving pressure, but slower filling.
2. Penetrant Materials and Classification
Part of ASNT's General topic Selection of the Appropriate PT Method; no percentage weight is published. Know the type, method, sensitivity and developer classification, and which contaminants matter for which alloys.
Key facts
- Type I penetrant is fluorescent and Type II is visible (color contrast).
- Methods: A water-washable, B lipophilic post-emulsifiable, C solvent-removable, D hydrophilic post-emulsifiable.
- AMS 2644 sensitivity levels run 1/2, 1, 2, 3 and 4, with level 4 the highest.
- Developer forms: a dry, b water-soluble, c water-suspendible, d nonaqueous Type I, e nonaqueous Type II, f special application.
- Lipophilic emulsifier is oil-based and diffuses into the penetrant film. Hydrophilic remover is a water-based detergent used after a prerinse.
- ASME Article 6 controls sulfur for nickel-base alloys and chlorine and fluorine for austenitic and duplex stainless steels and titanium.
Flashcards
Exam tip: Say the four methods out loud in order until A, B, C, D come without thinking. Most classification items are lost by swapping B and D.
3. Selecting the Appropriate PT Process
The second half of ASNT's General topic Selection of the Appropriate PT Method; no percentage weight is published. Items give you a part, a location and a required sensitivity, then ask which process fits.
Key facts
- Fluorescent systems are more sensitive than visible dye and need a darkened area and a UV-A source.
- Water-washable systems suit large volumes and rough surfaces, but overwashing can remove penetrant from shallow openings.
- Post-emulsifiable systems give better control on shallow discontinuities and finer finishes, at the cost of an extra timed step.
- Solvent-removable visible dye is the portable choice for spot work where water and power are unavailable.
- Rough surfaces hold background penetrant, so very high sensitivity is often impractical on them.
- ASME Article 6 does not allow fluorescent examination to follow color contrast examination on the same surface.
Flashcards
Exam tip: Read the stem for constraints first: location, surface finish and the required sensitivity usually eliminate two options straight away.
Test yourself on these topics
Take the free 15-question ASNT NDT Level II PT test, then save your results to unlock your Readiness Score and the mistakes bank.
4. Process Steps, Dwell and Excess Removal
Covers the processing side of ASNT's General topic Inspection and Evaluation of Indications; no percentage weight is published. Order of operations and timing limits are heavily tested.
Key facts
- The usual sequence is pre-clean, dry, apply penetrant, dwell, remove excess, dry as needed, develop, interpret, post-clean.
- ASME Article 6 requires cleaning of the area and at least 1 in. of adjacent surface before penetrant is applied.
Flashcards
Exam tip: Memorize the sequence and then the numbers attached to each step. Scenario items usually hide a single step done out of order.
5. Inspection and Evaluation of Indications
ASNT's General topic Inspection and Evaluation of Indications; no percentage weight is published. Know how each discontinuity looks, the viewing conditions and how to separate relevant, nonrelevant and false indications.
Key facts
- Cracks give sharp, often jagged lines; porosity gives scattered round dots; cold shuts give smooth, tight lines.
- Hot tears appear as ragged, branching lines at section changes in castings; laps appear in forged or wrought material.
Flashcards
Exam tip: Classify every indication in order: real or false, then relevant or nonrelevant, then acceptance. Skipping the first question causes most wrong answers.
6. Procedures, Standards and Specific Exam Application
ASNT's General topic Inspection Procedures and Standards plus the Specific exam, which lists only Codes, Applications and Techniques for general industry or pressure equipment. No percentage weights are published.
Key facts
- The Specific exam tests equipment, procedures and techniques, and covers specifications, codes and acceptance criteria used in the sector.
- ASME Section V Article 6 says how to perform PT; the referencing construction code, such as Section VIII Division 1, sets acceptance.
Flashcards
Exam tip: Separate the two questions the code asks: how was it examined (Section V) and is it acceptable (the construction code). Then apply the numbers.
How to pass
- The General exam allows 2.4 minutes per item and the Specific exam 3 minutes. PT has little arithmetic, so spend the spare time on process-order and acceptance items, where one word changes the answer.
- ASNT publishes no cut score for this exam. The 70% per exam and 80% composite figures often quoted come from employer programs under SNT-TC-1A, so treat 80% on each exam as your practice target.
- ASNT's public page does not name the codes behind the Specific exam. ASME Section V Article 6 and ASTM E165 are the usual references for pressure equipment and general industry work, so learn how their limits are applied.
- After a failed exam you must reapply and wait 30 days. A passed General result stays valid for 5 years, but a passed Specific result only for 2 years, so don't leave a long gap between them.
Frequently asked questions
How long should I study for the ASNT NDT Level II PT exam?
Most working candidates need 4 to 8 weeks at 45 to 60 minutes a day. Book your exam once your Readiness Score has stayed at 80 or higher for about a week.
Can I take the ASNT NDT Level II PT exam online?
No. ASNT NDT Level III exams are taken in person, on a computer, at Pearson VUE test centers or ASNT Authorized Exam Centers. Format: computer-based multiple choice with a scientific calculator provided by asnt. asnt does not publish whether any reference is supplied during these exams; confirm with asnt. this prep covers only the written general and specific exams, not the employer's visual acuity, practical or job-specific exams. Check ASNT's current exam information for the rules.
What score do I need to pass the ASNT NDT Level II PT exam?
Not published by ASNT for this exam. ASNT says its criterion-referenced cut scores are typically 70% to 80%. Both the General and the Specific exam must be passed, so aim for 80% or higher on each in practice. The exam has two multiple-choice exams: general 50 items and specific 40 items (general industry or pressure equipment sector) and a time limit of general 2 hours; specific 2 hours (4 hours in total).
What are the most tested topics?
The outline covers pt principles and capillary action, penetrant materials and classification, selecting the appropriate pt process, process steps, dwell and excess removal, inspection and evaluation of indications, procedures, standards and specific exam application. Use the free practice test to see which ones you need most.
The premium ASNT NDT Level II PT study path
Premium ASNT NDT Level II PT prep is studied one topic at a time. Each step starts with that topic's key notes and flashcard deck, then its own question sets of 25, so you master one topic before you move to the next. When every topic is strong, the 6 full mock exams show you're ready.
Your step-by-step study path
- 1PT Principles and Capillary Action10 key notes, 135 flashcards, then 500 practice questions in 20 sets of 25Notes free with an account
- 2Penetrant Materials and Classification10 key notes, 135 flashcards, then 500 practice questions in 20 sets of 25Premium
- 3Selecting the Appropriate PT Process10 key notes, 135 flashcards, then 500 practice questions in 20 sets of 25Premium
- 4Process Steps, Dwell and Excess Removal10 key notes, 135 flashcards, then 500 practice questions in 20 sets of 25Premium
- 5Inspection and Evaluation of Indications10 key notes, 130 flashcards, then 500 practice questions in 20 sets of 25Premium
- 6Procedures, Standards and Specific Exam Application10 key notes, 130 flashcards, then 500 practice questions in 20 sets of 25Premium
- Final step: 6 full mock exams50 questions each, timed like test day. Pass them, then book your exam.Premium
Get every note, flashcard and question
Premium Monthly
- One ASNT Level III exam of your choice: Basic, UT, RT or MT
- 3,000 practice questions + 6 full mock exams per exam
- 800 flashcards + 60 key notes per exam, by topic, plus mind maps
- Spaced repetition + mistakes bank
- Readiness Score & detailed reports
- Video lessons as they release
- Content updates during your access
- 5 bonuses: NDT formula sheet, discontinuity atlas, study planner and more
- Pass Guarantee: complete the prep, pass or 100% back
Renews monthly until you cancel. Cancel in two clicks from your account; you keep access until the end of the month you've paid for. No minimum term.
Premium Yearly
- One ASNT Level III exam of your choice: Basic, UT, RT or MT
- 3,000 practice questions + 6 full mock exams per exam
- 800 flashcards + 60 key notes per exam, by topic, plus mind maps
- Spaced repetition + mistakes bank
- Readiness Score & detailed reports
- Video lessons as they release
- Content updates during your access
- 5 bonuses: NDT formula sheet, discontinuity atlas, study planner and more
- Pass Guarantee: complete the prep, pass or 100% back
Renews once a year until you cancel. We email you before each renewal. Cancel any time from your account; you keep access until the end of the year you've paid for.
Summarized from ASNT's official candidate information and the rules cited, checked October 2026. Confirm current requirements with ASNT Certification Services LLC (American Society for Nondestructive Testing).