Try the full study dashboard free, no signup: practice, flashcards and your Exam Readiness Score. Open it →
Home / Study guides / ASNT NDT Level II RT
Study guide · Last updated November 2026

ASNT NDT Level II RT Exam Study Guide (2026)

Everything the ASNT NDT Level II, Radiographic Testing (RT) tests, topic by topic: what each section covers, the facts that come up most, and how to study it. Pair it with the free 15-question practice test.

The exam at a glance

QuestionsTwo multiple-choice exams: General 50 items and Specific 40 items (general industry or pressure equipment sector)
TimeGeneral 2 hours; Specific 2 hours (4 hours in total)
Passing scoreNot published by ASNT for this exam. ASNT says its criterion-referenced cut scores are typically 70% to 80%. Both the General and the Specific exam must be passed, so aim for 80% or higher on each in practice
FormatComputer-based multiple choice with a scientific calculator provided by ASNT. ASNT does not publish whether any reference is supplied during these exams; confirm with ASNT. This prep covers only the written General and Specific exams, not the employer's visual acuity, practical or job-specific exams
Certifying bodyASNT Certification Services LLC (American Society for Nondestructive Testing)
Test providerPearson VUE test centers and ASNT Authorized Exam Centers (in person, computer-based, no walk-ins)

Mind map: the whole exam on one screen

ASNT NDT Level II RT
Radiographic Principles and Radiation Sources
What tube current changesHalf-life of Co-60Inverse square lawMain interaction in steel at Ir-192 energies
Exposure Geometry and Image Quality
Formula for geometric unsharpnessTwo components of radiographic contrastReciprocity rule for X-ray exposureFilm density formula
Film, Screens, Darkroom and Processing
Purpose of the stop bathPurpose of fixerLook of a static markCause of reticulation
Indications, Discontinuities and Defects
6 key facts
Manufacturing Processes and Associated Discontinuities
6 key facts
Radiological Safety Principles
6 key facts
Codes, Procedures and Specific Exam Application
6 key facts
Free with an account

Read the complete ASNT NDT Level II RT study notes for “Radiographic Principles and Radiation Sources”

Our first full set of comprehensive notes, about 14 minutes of reading: Producing X-rays · Gamma ray sources · Interaction with matter · Distance and attenuation · What changes what, a worked exam example, the traps examiners use and a one-minute recap. Create a free account to read it and see how premium notes work before you decide.

Open the free dashboard

1. Radiographic Principles and Radiation Sources

The physics half of ASNT's General topic Review of Basic Radiographic Principles. ASNT publishes no percentage weights for RT. Know how X-rays and gamma rays are produced and how they interact with matter.

Key facts

  • X-rays come from electrons striking a target in a tube; gamma rays come from the decay of radioactive isotopes such as Ir-192, Co-60 and Se-75.
  • Tube voltage (kV) sets penetrating power. Tube current (mA) sets intensity without changing beam quality.
  • Gamma energy is fixed by the isotope. Activity falls with time and is measured in curies or becquerels.
  • Half-lives: Ir-192 about 74 days, Co-60 about 5.27 years, Se-75 about 120 days.
  • Attenuation in steel at common energies is dominated by Compton scattering. Pair production needs at least 1.02 MeV.
  • Intensity falls with the square of distance, and each half-value layer of absorber halves the transmitted intensity.

Flashcards

What tube current changesBeam intensity, not penetrating power.
Half-life of Co-60About 5.27 years.
Inverse square lawIntensity varies inversely with the square of the distance from the source.
Main interaction in steel at Ir-192 energiesCompton scattering.

Exam tip: Whenever a question changes one factor, ask whether it changes quality (kV, isotope) or quantity (mA, activity, time, distance). That sorts most principle items.

2. Exposure Geometry and Image Quality

The image-side half of ASNT's General topic Review of Basic Radiographic Principles; no percentage weight is published. Expect exposure arithmetic, unsharpness and the factors behind contrast and definition.

Key facts

  • Geometric unsharpness equals source size times object-to-film distance divided by source-to-object distance.
  • Reduce unsharpness with a smaller focal spot, a longer source-to-object distance and the film close to the part.
  • Exposure in mA-minutes or curie-minutes must rise with the square of the distance to hold density.
  • Radiographic contrast is subject contrast combined with film contrast.
  • Fine-grain, slower film and low scatter improve definition and the detail you can see.
  • Film density is the log of incident light divided by transmitted light, so density 2.0 transmits 1% of the light.

Flashcards

Formula for geometric unsharpnessUg = F x d / D.
Two components of radiographic contrastSubject contrast and film contrast.
Reciprocity rule for X-ray exposuremA times time stays constant for the same exposure.
Film density formulaD = log (incident light / transmitted light).

Exam tip: Write the formula before you touch the calculator, and square the distance ratio before anything else. Most errors here are a forgotten square.

3. Film, Screens, Darkroom and Processing

ASNT's General topic Darkroom Facilities, Techniques and Processing; no percentage weight is published and the topic remains listed. Know the bath sequence, what each bath does and how to read film artifacts.

Key facts

  • Manual sequence: develop, stop bath, fix, wash, wetting agent, dry.
  • Developer converts exposed silver halide to metallic silver; activity rises with temperature, commonly controlled near 68°F (20°C) with time set by the film maker.
  • Stop bath is a weak acid that neutralizes developer. Fixer removes unexposed silver halide and hardens the emulsion.
  • Fixing time is commonly set at about twice the clearing time. Poor washing leaves fixer that stains film over time.
  • Lead screens intensify exposure and absorb scatter; fine-grain film has lower speed but better definition.
  • Check safelights and film storage, because light leaks and radiation exposure both add fog.

Flashcards

Purpose of the stop bathNeutralizes developer and stops development.
Purpose of fixerRemoves unexposed silver halide and hardens the emulsion.
Look of a static markDark, branching, tree-like lines.
Cause of reticulationSharp temperature difference between processing baths.

Exam tip: Learn film artifacts as pairs, such as crimped before and after exposure. The exam likes the opposite-looking twin as the distractor.

Test yourself on these topics

Take the free 15-question ASNT NDT Level II RT test, then save your results to unlock your Readiness Score and the mistakes bank.

Start the free test

4. Indications, Discontinuities and Defects

ASNT's General topic Indication, Discontinuities and Defects; no percentage weight is published. Read density, shape and location together to name the discontinuity.

Key facts

  • Dark areas mean less absorption or missing metal; light areas mean extra absorption such as tungsten or excess reinforcement.
  • Cracks appear as fine, dark, jagged lines, and show best when the beam is aligned with the crack plane.
4 more key facts, 9 key notes, 115 flashcards and 425 practice questions for this topic are in premium.

Flashcards

Appearance of slag in a weldDark, irregular shape, often elongated along the pass.

Exam tip: Ask three things in order: is it darker or lighter, what shape is it, and where is it relative to the root and fusion lines.

5. Manufacturing Processes and Associated Discontinuities

ASNT's General topic Manufacturing Processes and Associated Discontinuities; no percentage weight is published. Link each process to the flaws it produces and how RT shows them.

Key facts

  • Casting flaws include gas porosity, shrinkage, hot tears, cold shuts, inclusions and core shift.
  • Welding flaws include porosity, slag, tungsten inclusions, lack of fusion, incomplete penetration and cracks.
4 more key facts, 8 key notes, 115 flashcards and 425 practice questions for this topic are in premium.

Flashcards

Casting flaw caused by inadequate feedingShrinkage.

Exam tip: Match the process first. If the stem says casting, you can immediately strike laps, and if it says GTAW, tungsten is back in play.

6. Radiological Safety Principles

ASNT's General topic Radiological Safety Principles Review; no percentage weight is published. US rules below come from 10 CFR Parts 20 and 34; state regulations may also apply.

Key facts

  • ALARA uses time, distance and shielding to keep dose as low as reasonably achievable.
  • 10 CFR 20 limits occupational total effective dose equivalent to 5 rem per year.
4 more key facts, 8 key notes, 115 flashcards and 425 practice questions for this topic are in premium.

Flashcards

Three means of ALARA dose controlTime, distance and shielding.

Exam tip: Use the mrem and rem units the US rules state. Trap items swap 5 mrem and 100 mrem area limits, so memorize both with the 30 cm distance.

7. Codes, Procedures and Specific Exam Application

ASNT's Specific exam lists only Codes, Applications and Techniques for general industry or pressure equipment, with no percentage weights published. ASME Section V Article 2 and Section VIII acceptance rules are typical references.

Key facts

  • Article 2 density: minimum 1.8 for X-ray and 2.0 for gamma on single-film viewing, maximum 4.0.
  • Density in the area of interest must stay within minus 15% to plus 30% of the density through the IQI body or adjacent to the designated wire.
4 more key facts, 8 key notes, 110 flashcards and 425 practice questions for this topic are in premium.

Flashcards

ASME Article 2 minimum density for X-ray1.8 on single-film viewing.

Exam tip: Separate Article 2 questions, which ask whether the film is valid, from construction-code questions, which ask whether the weld is acceptable.

How to pass

  • Expect exposure arithmetic. Practice inverse square, mA-minute and half-life problems on a scientific calculator, because ASNT provides one and asks you not to bring your own.
  • ASNT's RT General topics still include darkroom facilities and processing, with no dated outline change listed as of 9 Nov 2026. Study film processing even if your job is digital, and recheck the ASNT page before you book.
  • ASNT publishes no cut score for this exam. The 70% per exam and 80% composite figures often quoted come from employer programs under SNT-TC-1A, so treat 80% on each exam as your practice target.
  • This certificate does not replace radiation safety credentials. US radiographers working with sealed sources also need the training and certification that 10 CFR Part 34 requires, so check your state's rules.

Frequently asked questions

How long should I study for the ASNT NDT Level II RT exam?

Most working candidates need 4 to 8 weeks at 45 to 60 minutes a day. Book your exam once your Readiness Score has stayed at 80 or higher for about a week.

Can I take the ASNT NDT Level II RT exam online?

No. ASNT NDT Level III exams are taken in person, on a computer, at Pearson VUE test centers or ASNT Authorized Exam Centers. Format: computer-based multiple choice with a scientific calculator provided by asnt. asnt does not publish whether any reference is supplied during these exams; confirm with asnt. this prep covers only the written general and specific exams, not the employer's visual acuity, practical or job-specific exams. Check ASNT's current exam information for the rules.

What score do I need to pass the ASNT NDT Level II RT exam?

Not published by ASNT for this exam. ASNT says its criterion-referenced cut scores are typically 70% to 80%. Both the General and the Specific exam must be passed, so aim for 80% or higher on each in practice. The exam has two multiple-choice exams: general 50 items and specific 40 items (general industry or pressure equipment sector) and a time limit of general 2 hours; specific 2 hours (4 hours in total).

What are the most tested topics?

The outline covers radiographic principles and radiation sources, exposure geometry and image quality, film, screens, darkroom and processing, indications, discontinuities and defects, manufacturing processes and associated discontinuities, radiological safety principles, codes, procedures and specific exam application. Use the free practice test to see which ones you need most.

The premium ASNT NDT Level II RT study path

Premium ASNT NDT Level II RT prep is studied one topic at a time. Each step starts with that topic's key notes and flashcard deck, then its own question sets of 25, so you master one topic before you move to the next. When every topic is strong, the 6 full mock exams show you're ready.

3,000practice questions, every answer explained
6full-length mock exams, 50 questions each, timed
800flashcards with spaced repetition, sorted by topic
60comprehensive key notes across 7 topics

Your step-by-step study path

  1. 1
    Radiographic Principles and Radiation Sources9 key notes, 115 flashcards, then 450 practice questions in 18 sets of 25
    Notes free with an account
  2. 2
    Exposure Geometry and Image Quality9 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  3. 3
    Film, Screens, Darkroom and Processing9 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  4. 4
    Indications, Discontinuities and Defects9 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  5. 5
    Manufacturing Processes and Associated Discontinuities8 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  6. 6
    Radiological Safety Principles8 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  7. 7
    Codes, Procedures and Specific Exam Application8 key notes, 110 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  8. Final step: 6 full mock exams50 questions each, timed like test day. Pass them, then book your exam.
    Premium

Get every note, flashcard and question

Most popular · cancel anytime

Premium Monthly

$147/month
per exam
About $4.83 a day · less than a retake fee, for the certification that lets you approve procedures and certify technicians
  • One ASNT Level III exam of your choice: Basic, UT, RT or MT
  • 3,000 practice questions + 6 full mock exams per exam
  • 800 flashcards + 60 key notes per exam, by topic, plus mind maps
  • Spaced repetition + mistakes bank
  • Readiness Score & detailed reports
  • Video lessons as they release
  • Content updates during your access
  • 5 bonuses: NDT formula sheet, discontinuity atlas, study planner and more
  • Pass Guarantee: complete the prep, pass or 100% back

Renews monthly until you cancel. Cancel in two clicks from your account; you keep access until the end of the month you've paid for. No minimum term.

Best value · 3 months free

Premium Yearly

$1,323/year
per exam
Pay for 9 months, get 12. Save $441 against paying monthly.
  • One ASNT Level III exam of your choice: Basic, UT, RT or MT
  • 3,000 practice questions + 6 full mock exams per exam
  • 800 flashcards + 60 key notes per exam, by topic, plus mind maps
  • Spaced repetition + mistakes bank
  • Readiness Score & detailed reports
  • Video lessons as they release
  • Content updates during your access
  • 5 bonuses: NDT formula sheet, discontinuity atlas, study planner and more
  • Pass Guarantee: complete the prep, pass or 100% back

Renews once a year until you cancel. We email you before each renewal. Cancel any time from your account; you keep access until the end of the year you've paid for.

Pass Guarantee. Complete the full prep, sit your exam within 60 days, and if you don't pass we refund 100% of your subscription payments. See the requirements
Secure checkout by Stripe Card, Apple Pay, Google Pay Pass Guarantee

Summarized from ASNT's official candidate information and the rules cited, checked October 2026. Confirm current requirements with ASNT Certification Services LLC (American Society for Nondestructive Testing).

Start the free test