Try the full study dashboard free, no signup: practice, flashcards and your Exam Readiness Score. Open it →
Home / Study guides / ASNT NDT Level II UT
Study guide · Last updated November 2026

ASNT NDT Level II UT Exam Study Guide (2026)

Everything the ASNT NDT Level II, Ultrasonic Testing (UT) tests, topic by topic: what each section covers, the facts that come up most, and how to study it. Pair it with the free 15-question practice test.

The exam at a glance

QuestionsTwo multiple-choice exams: General 50 items and Specific 40 items (general industry or pressure equipment sector)
TimeGeneral 2 hours; Specific 2 hours (4 hours in total)
Passing scoreNot published by ASNT for this exam. ASNT says its criterion-referenced cut scores are typically 70% to 80%. Both the General and the Specific exam must be passed, so aim for 80% or higher on each in practice
FormatComputer-based multiple choice with a scientific calculator provided by ASNT. ASNT does not publish whether any reference is supplied during these exams; confirm with ASNT. This prep covers only the written General and Specific exams, not the employer's visual acuity, practical or job-specific exams
Certifying bodyASNT Certification Services LLC (American Society for Nondestructive Testing)
Test providerPearson VUE test centers and ASNT Authorized Exam Centers (in person, computer-based, no walk-ins)

Mind map: the whole exam on one screen

ASNT NDT Level II UT
Review of Ultrasonic Techniques
Wavelength formulaNear field length formulaLongitudinal velocity of waterPurpose of a couplant
Evaluation of Base Material Product Forms
Flaw orientation in a forged partTypical first sign of a laminationBeam used for axial flaws in pipeTypical frequency direction for coarse castings
Evaluation of Weldments
Formula for surface distanceFull skip distance for a shear-wave beamPlanar weld discontinuitiesVolumetric weld discontinuities
Evaluation of Bonded Structures
6 key facts
Discontinuity Detection
6 key facts
General Evaluation
6 key facts
Codes, Procedures and Specific Exam Application
6 key facts
Free with an account

Read the complete ASNT NDT Level II UT study notes for “Review of Ultrasonic Techniques”

Our first full set of comprehensive notes, about 15 minutes of reading: Waves and velocity · Refraction and wave mode · Beam shape · Contact and immersion setups · Instruments and calibration, a worked exam example, the traps examiners use and a one-minute recap. Create a free account to read it and see how premium notes work before you decide.

Open the free dashboard

1. Review of Ultrasonic Techniques

ASNT's first UT General topic before 5 February 2027, and most of UT Principles and Techniques after that date. ASNT publishes no percentage weights. Covers waves, contact and immersion setups, search units and calibration.

Key facts

  • Wavelength equals velocity divided by frequency. Common steel velocities are 0.233 in/µs longitudinal and about 0.127 in/µs shear.
  • Snell's law sets refraction: sine of each angle divided by the velocity in that material is constant.
  • Near field length equals diameter squared times frequency divided by 4 times velocity. Amplitude is unreliable inside it.
  • Beam spread half angle to the first null has sin θ = 1.22 x wavelength / diameter.
  • A couplant replaces air between search unit and part. Article 4 limits sulfur for nickel alloys and halides for austenitic stainless and titanium to 250 ppm.
  • Calibration blocks set range and sensitivity; the IIW-type block is used for checking beam index and refracted angle.

Flashcards

Wavelength formulaWavelength = velocity / frequency.
Near field length formulaN = D² x f / (4 x V).
Longitudinal velocity of waterAbout 0.058 in/µs (1,480 m/s).
Purpose of a couplantReplaces air so sound can pass into the part.

Exam tip: Write the formula first, then substitute, and keep velocity units and frequency in matching form. Most errors are mismatched units or wrong wave mode.

2. Evaluation of Base Material Product Forms

ASNT's UT General topic before 5 February 2027, then part of Examination of Materials and Product Forms. No percentage weight is published. Match the flaw orientation to the product form and choose the beam.

Key facts

  • Plate is commonly scanned with straight beam to find laminations; loss of back wall is a key sign.
  • Forgings have flaws that lie along the grain flow, so scan perpendicular to that flow.
  • Bars can have central bursts, often found by radial straight-beam examination.
  • Castings have coarse grains and rough surfaces, so lower frequencies are usually needed.
  • Pipe and tube are usually examined with circumferential shear waves for axial flaws and axial shear waves for circumferential flaws.
  • A sudden drop in back-wall echo with no clear forward echo is a sign of a flaw that is angled or scatters sound.

Flashcards

Flaw orientation in a forged partAlong the grain flow.
Typical first sign of a laminationLoss of back-wall echo with an earlier echo.
Beam used for axial flaws in pipeCircumferential shear waves.
Typical frequency direction for coarse castingsLower, often about 1 MHz.

Exam tip: Picture how the flaw is aligned before picking the beam. The beam wants to hit the flaw broadside, whatever the part shape.

3. Evaluation of Weldments

ASNT's UT General topic before 5 February 2027, later split across the Examination of Materials and Data Collection domains. No percentage weight is published. Expect skip geometry and telling flaws from weld geometry.

Key facts

  • Surface distance equals sound path times sine of the angle. Depth equals sound path times cosine, corrected for each skip.
  • Half skip distance is thickness times tangent of the angle; full skip is twice that.
  • Choose the angle that meets the suspected flaw most nearly at normal incidence.
  • Check the base metal in the scan path with straight beam, because laminations can block angle beams.
  • Cracks and lack of fusion are planar, while slag and porosity are volumetric.
  • Geometry such as a root bead, weld cap or mismatch can give repeatable echoes, so plot each signal.

Flashcards

Formula for surface distanceSound path x sine of the angle.
Full skip distance for a shear-wave beam2 x thickness x tangent of the angle.
Planar weld discontinuitiesCracks and lack of fusion.
Volumetric weld discontinuitiesSlag and porosity.

Exam tip: Sketch the plate and the beam for every geometry problem. Thirty seconds on the sketch saves you from calling a second-leg echo a first-leg one.

Test yourself on these topics

Take the free 15-question ASNT NDT Level II UT test, then save your results to unlock your Readiness Score and the mistakes bank.

Start the free test

4. Evaluation of Bonded Structures

ASNT's UT General topic before 5 February 2027. It does not appear as a separate heading on the revised outline after that date. No percentage weight is published. Learn how bonded and clad interfaces change the echo pattern.

Key facts

  • A good bond passes sound across the interface; a disbond is a strong air-backed reflector.
  • Over a disbond, skin reverberations strengthen and far-side echoes weaken or vanish.
4 more key facts, 9 key notes, 115 flashcards and 425 practice questions for this topic are in premium.

Flashcards

Screen change over a disbondStronger skin reverberations, weaker far-side echo.

Exam tip: Think of what is on the far side of the interface. Air sends the sound back; metal or good adhesive lets it pass.

5. Discontinuity Detection

ASNT's UT General topic before 5 February 2027, then part of the Materials and Product Forms and Data Collection domains. No percentage weight is published. Covers what controls whether a reflector is found at all.

Key facts

  • As a rule of thumb, reflectors smaller than about half a wavelength are hard to detect.
  • Higher frequency improves sensitivity and resolution but increases attenuation and scatter.
4 more key facts, 8 key notes, 115 flashcards and 425 practice questions for this topic are in premium.

Flashcards

Common detection threshold rule of thumbAbout half a wavelength.

Exam tip: When a stem says a flaw was missed, check orientation first, near-surface limits second and attenuation third.

6. General Evaluation

ASNT's UT General topic before 5 February 2027, and the core of UT Data Collection, Interpretation and Reporting after that date. No percentage weight is published. Covers amplitude, sizing and sorting real signals from false ones.

Key facts

  • Decibel difference equals 20 log of the amplitude ratio, so a factor of 2 is 6 dB and a factor of 10 is 20 dB.
  • A distance-amplitude correction curve shows the response of equal reflectors with distance.
4 more key facts, 8 key notes, 115 flashcards and 425 practice questions for this topic are in premium.

Flashcards

Amplitude ratio for 6 dBA factor of 2.

Exam tip: Bring every comparison to a common gain before calculating. Never compare amplitudes taken at different gains.

7. Codes, Procedures and Specific Exam Application

ASNT's Specific exam lists only Codes, Applications and Techniques for general industry or pressure equipment, with no percentage weights published. ASME Section V Article 4 and AWS D1.1 are typical references to practice applying.

Key facts

  • The Specific exam covers equipment, operating procedures and techniques, with specifications, codes and acceptance criteria used in the sector.
  • Article 4 calibration uses basic calibration blocks, with side-drilled holes the common weld reference.
4 more key facts, 8 key notes, 110 flashcards and 425 practice questions for this topic are in premium.

Flashcards

Common reference reflector for Article 4 weld calibrationSide-drilled holes.

Exam tip: On the Specific exam, read the procedure limit first, then apply the number. Answers usually depend on one defined limit, not on general UT theory.

How to pass

  • Check your exam date against 5 February 2027. Before it, the General exam follows six topics such as Evaluation of Weldments and Bonded Structures; after it, four domains covering principles and techniques, materials and product forms, data collection and reporting, and training, certification and safety.
  • The General exam allows 2.4 minutes per item. Know Snell's law, wavelength, near field, beam spread, decibels and skip geometry well enough to set each one up without hesitation on the ASNT calculator.
  • ASNT publishes no cut score for this exam. The 70% per exam and 80% composite figures often quoted come from employer programs under SNT-TC-1A, so treat 80% on each exam as your practice target.
  • After a failed exam you must reapply and wait 30 days. A passed Specific result stays valid for only 2 years if the General is not passed, so plan both exams close together.

Frequently asked questions

How long should I study for the ASNT NDT Level II UT exam?

Most working candidates need 4 to 8 weeks at 45 to 60 minutes a day. Book your exam once your Readiness Score has stayed at 80 or higher for about a week.

Can I take the ASNT NDT Level II UT exam online?

No. ASNT NDT Level III exams are taken in person, on a computer, at Pearson VUE test centers or ASNT Authorized Exam Centers. Format: computer-based multiple choice with a scientific calculator provided by asnt. asnt does not publish whether any reference is supplied during these exams; confirm with asnt. this prep covers only the written general and specific exams, not the employer's visual acuity, practical or job-specific exams. Check ASNT's current exam information for the rules.

What score do I need to pass the ASNT NDT Level II UT exam?

Not published by ASNT for this exam. ASNT says its criterion-referenced cut scores are typically 70% to 80%. Both the General and the Specific exam must be passed, so aim for 80% or higher on each in practice. The exam has two multiple-choice exams: general 50 items and specific 40 items (general industry or pressure equipment sector) and a time limit of general 2 hours; specific 2 hours (4 hours in total).

What are the most tested topics?

The outline covers review of ultrasonic techniques, evaluation of base material product forms, evaluation of weldments, evaluation of bonded structures, discontinuity detection, general evaluation, codes, procedures and specific exam application. Use the free practice test to see which ones you need most.

The premium ASNT NDT Level II UT study path

Premium ASNT NDT Level II UT prep is studied one topic at a time. Each step starts with that topic's key notes and flashcard deck, then its own question sets of 25, so you master one topic before you move to the next. When every topic is strong, the 6 full mock exams show you're ready.

3,000practice questions, every answer explained
6full-length mock exams, 50 questions each, timed
800flashcards with spaced repetition, sorted by topic
60comprehensive key notes across 7 topics

Your step-by-step study path

  1. 1
    Review of Ultrasonic Techniques9 key notes, 115 flashcards, then 450 practice questions in 18 sets of 25
    Notes free with an account
  2. 2
    Evaluation of Base Material Product Forms9 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  3. 3
    Evaluation of Weldments9 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  4. 4
    Evaluation of Bonded Structures9 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  5. 5
    Discontinuity Detection8 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  6. 6
    General Evaluation8 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  7. 7
    Codes, Procedures and Specific Exam Application8 key notes, 110 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  8. Final step: 6 full mock exams50 questions each, timed like test day. Pass them, then book your exam.
    Premium

Get every note, flashcard and question

Most popular · cancel anytime

Premium Monthly

$147/month
per exam
About $4.83 a day · less than a retake fee, for the certification that lets you approve procedures and certify technicians
  • One ASNT Level III exam of your choice: Basic, UT, RT or MT
  • 3,000 practice questions + 6 full mock exams per exam
  • 800 flashcards + 60 key notes per exam, by topic, plus mind maps
  • Spaced repetition + mistakes bank
  • Readiness Score & detailed reports
  • Video lessons as they release
  • Content updates during your access
  • 5 bonuses: NDT formula sheet, discontinuity atlas, study planner and more
  • Pass Guarantee: complete the prep, pass or 100% back

Renews monthly until you cancel. Cancel in two clicks from your account; you keep access until the end of the month you've paid for. No minimum term.

Best value · 3 months free

Premium Yearly

$1,323/year
per exam
Pay for 9 months, get 12. Save $441 against paying monthly.
  • One ASNT Level III exam of your choice: Basic, UT, RT or MT
  • 3,000 practice questions + 6 full mock exams per exam
  • 800 flashcards + 60 key notes per exam, by topic, plus mind maps
  • Spaced repetition + mistakes bank
  • Readiness Score & detailed reports
  • Video lessons as they release
  • Content updates during your access
  • 5 bonuses: NDT formula sheet, discontinuity atlas, study planner and more
  • Pass Guarantee: complete the prep, pass or 100% back

Renews once a year until you cancel. We email you before each renewal. Cancel any time from your account; you keep access until the end of the year you've paid for.

Pass Guarantee. Complete the full prep, sit your exam within 60 days, and if you don't pass we refund 100% of your subscription payments. See the requirements
Secure checkout by Stripe Card, Apple Pay, Google Pay Pass Guarantee

Summarized from ASNT's official candidate information and the rules cited, checked October 2026. Confirm current requirements with ASNT Certification Services LLC (American Society for Nondestructive Testing).

Start the free test