Try the full study dashboard free, no signup: practice, flashcards and your Exam Readiness Score. Open it →
Home / Study guides / AE Level III
Study guide · Last updated November 2026

AE Level III Exam Study Guide (2026)

Everything the ASNT NDT Level III Acoustic Emission Testing (AE) tests, topic by topic: what each section covers, the facts that come up most, and how to study it. Pair it with the free 15-question practice test.

The exam at a glance

Questions135 multiple-choice questions
Time4 hours
Passing scoreNot published per exam. Aim for 80% or higher in practice (ASNT says its criterion-referenced cut scores are typically 70% to 80%)
FormatClosed book, computer-based, with an on-screen calculator. No practical exam. You must also pass the NDT Basic exam to be certified
Certifying bodyASNT Certification Services LLC (American Society for Nondestructive Testing)
Test providerPearson VUE test centers and ASNT Authorized Exam Centers (in person, computer-based)

Mind map: the whole exam on one screen

AE Level III
AE Principles, Sources and Wave Propagation
Felicity ratioKaiser effectBurst versus continuous emissionFour causes of AE attenuation
Sensors, Cables and Signal Conditioning
Reference for the dBAE scaleVoltage ratio for 40 dBPurpose of a waveguideResonant versus wideband sensor
Signal Detection, Processing and Source Location
Hit feature unaffected by thresholdEffect of hit definition time set too shortHit lockout timeLinear location formula from sensor 1
Equipment Selection, Calibration and Loading
7 key facts
Noise, Data Display, Interpretation and Evaluation
7 key facts
Codes, Standards, Procedures and Societies
6 key facts
Applications of Acoustic Emission Testing
7 key facts
Free with an account

Read the complete AE Level III study notes for “AE Principles, Sources and Wave Propagation”

Our first full set of comprehensive notes, about 15 minutes of reading: What acoustic emission is · Load history: Kaiser and Felicity · Wave propagation · Frequency and sensor choice, a worked exam example, the traps examiners use and a one-minute recap. Create a free account to read it and see how premium notes work before you decide.

Open the free dashboard

1. AE Principles, Sources and Wave Propagation

What acoustic emission is, the sources that produce it, the Kaiser and Felicity effects, and how waves travel and attenuate. ASNT does not publish domain weights for the AE exam; this background runs through its instrumentation, technique and application areas.

Key facts

  • Acoustic emission is the transient elastic wave released by rapid energy release within a material, such as crack growth, plastic deformation, fiber breakage, corrosion or leaks.
  • AE is passive: the structure must be stimulated (load, pressure, heat) and only active sources emit. Static, non-growing flaws are silent.
  • Kaiser effect: no significant emission until the previous maximum load is exceeded. Felicity ratio = load at onset of emission ÷ previous maximum load.
  • A Felicity ratio below 1 (Felicity effect) indicates damage; it is a key criterion for fiber-reinforced plastics.
  • Burst emission is discrete events (cracking); continuous emission is overlapping signals (leaks, friction, plastic flow in some materials).
  • Attenuation comes from geometric spreading, absorption, dispersion, scattering and energy leaking into contained fluid.
  • In plates, Lamb waves travel as extensional (symmetric, faster at low frequency-thickness) and flexural (antisymmetric, slower, dispersive) modes.

Flashcards

Felicity ratioLoad at onset of significant AE ÷ previous maximum load.
Kaiser effectNo significant emission until the previous maximum load is exceeded.
Burst versus continuous emissionBurst: separate transient events. Continuous: overlapping signals, as from leaks.
Four causes of AE attenuationGeometric spreading, absorption, dispersion and scattering.

Exam tip: For any AE question, ask what the stimulus is. No change in load or other stimulus means no emission from cracks.

2. Sensors, Cables and Signal Conditioning

Piezoelectric sensors, couplants and mounting, waveguides, preamplifiers, filters, cables and the dBAE amplitude scale.

Key facts

  • Most AE sensors are piezoelectric. Resonant sensors give high sensitivity in a narrow band; wideband sensors give flatter response and better waveforms.
  • Couplant and mounting (magnetic hold-downs, clamps, adhesive) must give repeatable contact; verify after mounting with lead breaks.
  • Waveguides carry AE from hot, cold or inaccessible surfaces to a sensor within its rating, at the cost of attenuation.
  • Preamplifiers (often 40 dB, ×100) sit close to the sensor to drive long cables; integral-preamplifier sensors avoid a separate unit.
  • Band-pass filters remove low-frequency mechanical noise and high-frequency electrical noise.
  • dBAE = 20 log(V ÷ 1 µV) referred to the sensor output; 6 dB doubles voltage and 20 dB is ×10.
  • Differential sensors and shielded, grounded cables reduce electromagnetic interference.

Flashcards

Reference for the dBAE scale0 dB = 1 µV at the sensor output, before amplification.
Voltage ratio for 40 dB×100.
Purpose of a waveguideCarries AE to a sensor away from extreme temperature or poor access.
Resonant versus wideband sensorResonant: more sensitive, narrow band. Wideband: flatter response, better waveforms.

Exam tip: Convert every amplitude problem back to the sensor: remove preamplifier and system gain before applying 20 log(V ÷ 1 µV).

3. Signal Detection, Processing and Source Location

Thresholds, hit-based features, timing parameters, waveform-based and advanced processing, and zone, linear and planar source location.

Key facts

  • Hit features: arrival time, peak amplitude, counts (threshold crossings), duration, rise time, energy (MARSE or true energy) and average frequency.
  • Counts, duration, rise time and threshold-based energy depend on the threshold; peak amplitude does not.
  • Peak definition time (PDT) finds the true peak; hit definition time (HDT) decides when a hit ends; hit lockout time (HLT) ignores reflections after the hit.
  • HDT too long merges events; HDT too short splits one event into several hits.
  • Zone location: the first-hit sensor defines the zone. Linear location: x from sensor 1 = (D − V × Δt) ÷ 2.
  • Planar location needs at least three sensors and solves for the position from time differences; accuracy depends on velocity and mode choice.
  • Advanced processing includes waveform (modal) analysis, frequency analysis, pattern recognition and clustering.

Flashcards

Hit feature unaffected by thresholdPeak amplitude.
Effect of hit definition time set too shortOne event is split into several hits.
Hit lockout timePeriod after a hit ends when the channel ignores reflections and late arrivals.
Linear location formula from sensor 1x = (D − V × Δt) ÷ 2.

Exam tip: Sketch the waveform with the threshold drawn on it. Most feature questions are answered by seeing which features begin and end at threshold crossings.

Test yourself on these topics

Take the free 15-question AE Level III test, then save your results to unlock your Readiness Score and the mistakes bank.

Start the free test

4. Equipment Selection, Calibration and Loading

Choosing equipment for the job, sensor and system verification, setting up the test and planning the loading sequence.

Key facts

  • Equipment choice depends on material, frequency range, attenuation, number of channels needed, environment and the governing code.
  • Sensor calibration: primary (ASTM E1106) and secondary (ASTM E1781); field checks with lead breaks per ASTM E976.
5 more key facts, 9 key notes, 115 flashcards and 425 practice questions for this topic are in premium.

Flashcards

Field check of sensor responsePencil lead break near each sensor after mounting and at the end of the test.

Exam tip: The exam expects you to treat verification as part of the test: check at the start, check at the end, and treat a failed check as invalidating data.

5. Noise, Data Display, Interpretation and Evaluation

Noise sources and how to identify and suppress them before and during the test, data displays, interpretation, evaluation against criteria and reports.

Key facts

  • Mechanical noise: rubbing, impacts, rain, flow, pumps, cavitation. Electrical noise: welding, switching, radio, ground loops.
  • Identify noise before the test by listening with no load applied; record background levels.
5 more key facts, 8 key notes, 115 flashcards and 425 practice questions for this topic are in premium.

Flashcards

Sign of EMI in AE dataSimultaneous arrival at all channels, very fast rise time.

Exam tip: When a stem describes odd data, decide first whether it obeys wave travel physics. If arrival times ignore distance, it is electrical.

6. Codes, Standards, Procedures and Societies

Guide-type standards (terminology, calibration), codified AE procedures, user-developed procedures and the societies active in AE.

Key facts

  • ASME Section V: Article 11 (FRP vessels during pressure test), Article 12 (metallic vessels during pressure test), Article 13 (continuous monitoring).
  • ASTM E1316 terminology; E976 sensor response reproducibility; E1106 and E1781 sensor calibration; E650 sensor mounting; E750 instrument characterization.
4 more key facts, 8 key notes, 115 flashcards and 425 practice questions for this topic are in premium.

Flashcards

ASME Section V article for AE of metallic vessels during pressure testingArticle 12.

Exam tip: Pair each code number with the structure it covers. The exam likes swapping Articles 11, 12 and 13.

7. Applications of Acoustic Emission Testing

Where AE is used and why: pressure vessels and tanks, piping, composites, bridges and structures, leak detection, and process and weld monitoring.

Key facts

  • Pressure vessels and spheres: global test during pressurization, much insulation can stay on, sources followed up locally.
  • Atmospheric storage tank floors: on-stream AE screening for corrosion and leaks to prioritize internal inspection.
5 more key facts, 8 key notes, 110 flashcards and 425 practice questions for this topic are in premium.

Flashcards

Main advantage of AE over local NDTGlobal monitoring of a large structure from a few fixed sensors.

Exam tip: Application questions often ask why AE was chosen. The answers are global coverage, on-line testing and detection of active damage.

How to pass

  • 135 questions in 4 hours is about 106 seconds each. Keep the dB, location and Felicity ratio arithmetic quick so you have time for the long scenario stems.
  • Learn the hit features (amplitude, counts, duration, rise time, energy) and which of them depend on the threshold. Many questions turn on that.
  • Know the timing parameters: peak definition time, hit definition time and hit lockout time, and what goes wrong when each is set too short or too long.
  • Know which ASME Section V article covers which job: FRP vessels, metallic vessels during pressure testing, and continuous monitoring.

Frequently asked questions

How long should I study for the AE Level III exam?

Most working candidates need 4 to 8 weeks at 45 to 60 minutes a day. Book your exam once your Readiness Score has stayed at 80 or higher for about a week.

Can I take the AE Level III exam online?

No. ASNT NDT Level III exams are taken in person, on a computer, at Pearson VUE test centers or ASNT Authorized Exam Centers. Format: closed book, computer-based, with an on-screen calculator. no practical exam. you must also pass the ndt basic exam to be certified. Check ASNT's current exam information for the rules.

What score do I need to pass the AE Level III exam?

Not published per exam. Aim for 80% or higher in practice (ASNT says its criterion-referenced cut scores are typically 70% to 80%). The exam has 135 multiple-choice questions and a time limit of 4 hours.

What are the most tested topics?

The outline covers ae principles, sources and wave propagation, sensors, cables and signal conditioning, signal detection, processing and source location, equipment selection, calibration and loading, noise, data display, interpretation and evaluation, codes, standards, procedures and societies, applications of acoustic emission testing. Use the free practice test to see which ones you need most.

The premium AE Level III study path

Premium AE Level III prep is studied one topic at a time. Each step starts with that topic's key notes and flashcard deck, then its own question sets of 25, so you master one topic before you move to the next. When every topic is strong, the 6 full mock exams show you're ready.

3,000practice questions, every answer explained
6full-length mock exams, 135 questions each, timed
800flashcards with spaced repetition, sorted by topic
60comprehensive key notes across 7 topics

Your step-by-step study path

  1. 1
    AE Principles, Sources and Wave Propagation9 key notes, 115 flashcards, then 450 practice questions in 18 sets of 25
    Notes free with an account
  2. 2
    Sensors, Cables and Signal Conditioning9 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  3. 3
    Signal Detection, Processing and Source Location9 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  4. 4
    Equipment Selection, Calibration and Loading9 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  5. 5
    Noise, Data Display, Interpretation and Evaluation8 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  6. 6
    Codes, Standards, Procedures and Societies8 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  7. 7
    Applications of Acoustic Emission Testing8 key notes, 110 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  8. Final step: 6 full mock exams135 questions each, timed like test day. Pass them, then book your exam.
    Premium

Get every note, flashcard and question

Most popular · cancel anytime

Premium Monthly

$147/month
per exam
About $4.83 a day · less than a retake fee, for the certification that lets you approve procedures and certify technicians
  • One ASNT Level III exam of your choice: Basic, UT, RT or MT
  • 3,000 practice questions + 6 full mock exams per exam
  • 800 flashcards + 60 key notes per exam, by topic, plus mind maps
  • Spaced repetition + mistakes bank
  • Readiness Score & detailed reports
  • Video lessons as they release
  • Content updates during your access
  • 5 bonuses: NDT formula sheet, discontinuity atlas, study planner and more
  • Pass Guarantee: complete the prep, pass or 100% back

Renews monthly until you cancel. Cancel in two clicks from your account; you keep access until the end of the month you've paid for. No minimum term.

Best value · 3 months free

Premium Yearly

$1,323/year
per exam
Pay for 9 months, get 12. Save $441 against paying monthly.
  • One ASNT Level III exam of your choice: Basic, UT, RT or MT
  • 3,000 practice questions + 6 full mock exams per exam
  • 800 flashcards + 60 key notes per exam, by topic, plus mind maps
  • Spaced repetition + mistakes bank
  • Readiness Score & detailed reports
  • Video lessons as they release
  • Content updates during your access
  • 5 bonuses: NDT formula sheet, discontinuity atlas, study planner and more
  • Pass Guarantee: complete the prep, pass or 100% back

Renews once a year until you cancel. We email you before each renewal. Cancel any time from your account; you keep access until the end of the year you've paid for.

Pass Guarantee. Complete the full prep, sit your exam within 60 days, and if you don't pass we refund 100% of your subscription payments. See the requirements
Secure checkout by Stripe Card, Apple Pay, Google Pay Pass Guarantee

Summarized from ASNT's official candidate information and the rules cited, checked October 2026. Confirm current requirements with ASNT Certification Services LLC (American Society for Nondestructive Testing).

Start the free test