Try the full study dashboard free, no signup: practice, flashcards and your Exam Readiness Score. Open it →
Home / Study guides / NDT Basic
Study guide · Last updated November 2026

NDT Basic Exam Study Guide (2026)

Everything the ASNT NDT Level III Basic Exam tests, topic by topic: what each section covers, the facts that come up most, and how to study it. Pair it with the free 15-question practice test.

The exam at a glance

Questions135 multiple-choice questions (some are unscored pretest items)
Time4 hours
Passing scoreNot published per exam. Aim for 80% or higher in practice (ASNT says its criterion-referenced cut scores are typically 70% to 80%)
FormatClosed book, computer-based, with an on-screen calculator
Certifying bodyASNT Certification Services LLC (American Society for Nondestructive Testing)
Test providerPearson VUE test centers and ASNT Authorized Exam Centers (in person, computer-based)

Mind map: the whole exam on one screen

NDT Basic
NDT Certification Programs (SNT-TC-1A, CP-189)
SNT-TC-1A in one lineCP-189 in one lineWho certifies under SNT-TC-1A?CP-189 Level III prerequisite
Training, Examinations and Personnel Programs
CP-105 isComposite grade under SNT-TC-1AThree exams for Level I/IINear-vision exam frequency (SNT-TC-1A)
Surface Methods: VT, PT and MT
PT detectsMT detectsMethod D penetrantMethod B penetrant
Volumetric Methods: RT and UT
6 key facts
Electromagnetic and Other Methods: ET, AE, LT, IR, MFL, NR
7 key facts
Materials, Processes and Discontinuities
7 key facts
Codes, Standards, Procedures and Audits
6 key facts
Free with an account

Read the complete NDT Basic study notes for “NDT Certification Programs (SNT-TC-1A, CP-189)”

Our first full set of comprehensive notes, about 15 minutes of reading: Recommended practice versus standard · Employer-based and central certification · Level III qualification: the key difference · What each level does · The written practice and records, a worked exam example, the traps examiners use and a one-minute recap. Create a free account to read it and see how premium notes work before you decide.

Open the free dashboard

1. NDT Certification Programs (SNT-TC-1A, CP-189)

The first domain of the Basic exam: how employer-based and central certification schemes work, what SNT-TC-1A and CP-189 each require, and what a Level III must do to run a compliant program. From 1 January 2026 the references are the 2024 editions.

Key facts

  • SNT-TC-1A is a recommended practice: guidelines ('should') that the employer adapts into a written practice. The written practice, once approved, is what the employer is audited against.
  • ANSI/ASNT CP-189 is a consensus standard: its requirements ('shall') are mandatory for an employer that adopts it, with less room to tailor.
  • Both are employer-based: the employer qualifies and certifies its own personnel. Certification ends when employment ends.
  • CP-189 requires an employer's Level III to hold a current ASNT NDT Level III certificate in the method; SNT-TC-1A lets the employer examine Level III candidates itself or use the ASNT certificate.
  • Central (third-party) schemes such as ASNT 9712 (ISO 9712-based) certify the person independently of the employer; the employer still authorizes them to work.
  • Three levels: Level I performs specific calibrations and tests under supervision; Level II sets up and calibrates equipment, interprets and evaluates results against codes and reports them; Level III establishes techniques and procedures, interprets codes and designates methods.
  • Records the employer keeps for each certified person include name, level and method, education and experience, training, exam results, vision exams and the dates of certification and expiry.

Flashcards

SNT-TC-1A in one lineA recommended practice the employer adapts into a written practice.
CP-189 in one lineAn ANSI consensus standard with mandatory requirements for employer certification.
Who certifies under SNT-TC-1A?The employer, according to its written practice.
CP-189 Level III prerequisiteA current ASNT NDT Level III certificate in the applicable method.

Exam tip: Watch the verbs. A question that says 'shall' or 'must' about SNT-TC-1A is usually the wrong option; SNT-TC-1A recommends.

2. Training, Examinations and Personnel Programs

The Level III as program owner: training hours and topical outlines (CP-105), experience, vision tests, written and practical exams, grading and recertification. Expect grading calculations and 'what does the written practice need' questions.

Key facts

  • ANSI/ASNT CP-105 holds the standard topical outlines (body of knowledge) for NDT training; ASNT builds its exam items from it.
  • Qualification needs training, experience and examination; the written practice sets the hours for each level and method, using SNT-TC-1A's recommendations as the baseline.
  • Vision: SNT-TC-1A recommends a near-vision acuity exam and a color contrast differentiation test, with the near-vision exam given annually.
  • Level I and II exams are general (written, method theory), specific (written, the employer's procedures, codes and equipment) and practical (hands-on).
  • SNT-TC-1A recommends a composite grade of at least 80% with no individual exam below 70%.
  • Recommended maximum recertification interval: 5 years for Levels I, II and III. Recertification can be by examination or by evidence of continuing satisfactory work, as the written practice allows.
  • The Level III designs training, approves instructors and course content, writes and administers exams, and keeps the records.

Flashcards

CP-105 isThe standard topical outlines for NDT personnel training.
Composite grade under SNT-TC-1AAt least 80%, with no single exam below 70%.
Three exams for Level I/IIGeneral, specific and practical.
Near-vision exam frequency (SNT-TC-1A)Annually.

Exam tip: For grading questions, check both rules: the composite must reach 80% and every single exam must reach 70%. Distractors break one of them.

3. Surface Methods: VT, PT and MT

Visual, liquid penetrant and magnetic particle testing at Level II depth: how each works, what it finds, process steps and limits, and how to choose between them.

Key facts

  • VT is the first method on almost every job: direct (eye, magnifiers, mirrors) or remote (borescopes, video, cameras). Lighting, viewing angle and distance control its sensitivity.
  • PT finds discontinuities open to the surface in nonporous materials. Steps: precleaning, penetrant, dwell, excess removal, developer, interpretation, postcleaning.
  • ASTM E1417 / E165: Type I fluorescent, Type II visible; Method A water washable, B lipophilic post-emulsifiable, C solvent removable, D hydrophilic post-emulsifiable.
  • MT finds surface and slightly subsurface discontinuities in ferromagnetic materials only. Austenitic stainless steel, aluminum, copper and titanium can't be tested with MT.
  • MT works best when the discontinuity lies across the magnetic field, so each area is usually tested in two directions about 90° apart.
  • Surface condition matters most for PT: smeared metal from grinding or blasting can close cracks, so etching may be needed before PT on soft metals.

Flashcards

PT detectsSurface-breaking discontinuities in nonporous materials.
MT detectsSurface and near-surface discontinuities in ferromagnetic materials.
Method D penetrantPost-emulsifiable, hydrophilic emulsifier.
Method B penetrantPost-emulsifiable, lipophilic emulsifier.

Exam tip: On 'which method' questions, rule out by material first (magnetic? conductive? porous?), then by flaw location (surface, subsurface, volumetric).

Test yourself on these topics

Take the free 15-question NDT Basic test, then save your results to unlock your Readiness Score and the mistakes bank.

Start the free test

4. Volumetric Methods: RT and UT

Radiography and ultrasonics at Level II depth: physics basics, what each finds best, and the classic RT-versus-UT selection questions. Exposure and velocity math appears even on the Basic.

Key facts

  • RT records differences in radiation absorbed through the part. It suits volumetric flaws (porosity, slag, shrinkage) and planar flaws aligned with the beam.
  • Exposure time varies with the square of source-to-film distance; intensity varies inversely with the square of distance.
4 more key facts, 9 key notes, 115 flashcards and 425 practice questions for this topic are in premium.

Flashcards

RT is best forVolumetric discontinuities and planar ones aligned with the beam.

Exam tip: When a question gives flaw orientation, use it. Orientation, not size, usually decides between RT and UT.

5. Electromagnetic and Other Methods: ET, AE, LT, IR, MFL, NR

The methods candidates skip and then lose marks on. Know the principle, typical application and main limitation of each.

Key facts

  • ET induces eddy currents in conductive materials; changes in conductivity, permeability, geometry or flaws change the coil impedance. Used for tubing, surface cracks, conductivity and coating thickness.
  • Standard depth of penetration δ = 1 ÷ √(π f μ σ): higher frequency, conductivity or permeability means shallower penetration.
5 more key facts, 8 key notes, 115 flashcards and 425 practice questions for this topic are in premium.

Flashcards

ET needsAn electrically conductive material.

Exam tip: Learn one application and one limitation per method. Most Basic questions on these methods ask exactly that.

6. Materials, Processes and Discontinuities

Materials science and process technology: how metals are made and joined, which discontinuities each process creates, and how parts fail in service.

Key facts

  • Inherent discontinuities form when metal first solidifies (pipe, inclusions, porosity in ingots).
  • Casting: shrinkage, gas porosity, cold shuts, hot tears, inclusions, misruns.
5 more key facts, 8 key notes, 115 flashcards and 425 practice questions for this topic are in premium.

Flashcards

FlakesInternal hydrogen cracks in heavy steel forgings.

Exam tip: Sort every discontinuity by when it forms: inherent, processing or service. Many questions are just that classification.

7. Codes, Standards, Procedures and Audits

The Level III's paperwork: interpreting codes and specifications, writing and approving procedures and work instructions, acceptance criteria, and internal and external audits.

Key facts

  • Hierarchy: the contract and referencing code set what is required; the procedure says how; a technique sheet or work instruction gives the settings for a specific part.
  • Acceptance criteria come from the referencing code, standard or contract, never from the technician's judgment.
4 more key facts, 8 key notes, 110 flashcards and 425 practice questions for this topic are in premium.

Flashcards

Where do acceptance criteria come from?The referencing code, standard or contract specification.

Exam tip: If an answer lets a Level I or II set acceptance criteria or approve a procedure, it is almost always wrong.

How to pass

  • 135 questions in 4 hours is about 1 minute 45 seconds each. Most items are short recall or 'which method fits' scenarios, so bank time early.
  • From 1 January 2026 the references are the 2024 editions of SNT-TC-1A and CP-189. Study the current editions, not the 2020 ones.
  • Know the difference between a recommended practice (SNT-TC-1A, 'should') and a standard (CP-189, 'shall'). Many certification questions turn on it.
  • The Basic covers all 11 methods at a Level II depth: what each detects, its limits and when to choose it. Don't skip AE, LT, IR, MFL and NR.

Frequently asked questions

How long should I study for the NDT Basic exam?

Most working candidates need 4 to 8 weeks at 45 to 60 minutes a day. Book your exam once your Readiness Score has stayed at 80 or higher for about a week.

Can I take the NDT Basic exam online?

No. ASNT NDT Level III exams are taken in person, on a computer, at Pearson VUE test centers or ASNT Authorized Exam Centers. Format: closed book, computer-based, with an on-screen calculator. Check ASNT's current exam information for the rules.

What score do I need to pass the NDT Basic exam?

Not published per exam. Aim for 80% or higher in practice (ASNT says its criterion-referenced cut scores are typically 70% to 80%). The exam has 135 multiple-choice questions (some are unscored pretest items) and a time limit of 4 hours.

What are the most tested topics?

The outline covers ndt certification programs (snt-tc-1a, cp-189), training, examinations and personnel programs, surface methods: vt, pt and mt, volumetric methods: rt and ut, electromagnetic and other methods: et, ae, lt, ir, mfl, nr, materials, processes and discontinuities, codes, standards, procedures and audits. Use the free practice test to see which ones you need most.

The premium NDT Basic study path

Premium NDT Basic prep is studied one topic at a time. Each step starts with that topic's key notes and flashcard deck, then its own question sets of 25, so you master one topic before you move to the next. When every topic is strong, the 6 full mock exams show you're ready.

3,000practice questions, every answer explained
6full-length mock exams, 135 questions each, timed
800flashcards with spaced repetition, sorted by topic
60comprehensive key notes across 7 topics

Your step-by-step study path

  1. 1
    NDT Certification Programs (SNT-TC-1A, CP-189)9 key notes, 115 flashcards, then 450 practice questions in 18 sets of 25
    Notes free with an account
  2. 2
    Training, Examinations and Personnel Programs9 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  3. 3
    Surface Methods: VT, PT and MT9 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  4. 4
    Volumetric Methods: RT and UT9 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  5. 5
    Electromagnetic and Other Methods: ET, AE, LT, IR, MFL, NR8 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  6. 6
    Materials, Processes and Discontinuities8 key notes, 115 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  7. 7
    Codes, Standards, Procedures and Audits8 key notes, 110 flashcards, then 425 practice questions in 17 sets of 25
    Premium
  8. Final step: 6 full mock exams135 questions each, timed like test day. Pass them, then book your exam.
    Premium

Get every note, flashcard and question

Most popular · cancel anytime

Premium Monthly

$147/month
per exam
About $4.83 a day · less than a retake fee, for the certification that lets you approve procedures and certify technicians
  • One ASNT Level III exam of your choice: Basic, UT, RT or MT
  • 3,000 practice questions + 6 full mock exams per exam
  • 800 flashcards + 60 key notes per exam, by topic, plus mind maps
  • Spaced repetition + mistakes bank
  • Readiness Score & detailed reports
  • Video lessons as they release
  • Content updates during your access
  • 5 bonuses: NDT formula sheet, discontinuity atlas, study planner and more
  • Pass Guarantee: complete the prep, pass or 100% back

Renews monthly until you cancel. Cancel in two clicks from your account; you keep access until the end of the month you've paid for. No minimum term.

Best value · 3 months free

Premium Yearly

$1,323/year
per exam
Pay for 9 months, get 12. Save $441 against paying monthly.
  • One ASNT Level III exam of your choice: Basic, UT, RT or MT
  • 3,000 practice questions + 6 full mock exams per exam
  • 800 flashcards + 60 key notes per exam, by topic, plus mind maps
  • Spaced repetition + mistakes bank
  • Readiness Score & detailed reports
  • Video lessons as they release
  • Content updates during your access
  • 5 bonuses: NDT formula sheet, discontinuity atlas, study planner and more
  • Pass Guarantee: complete the prep, pass or 100% back

Renews once a year until you cancel. We email you before each renewal. Cancel any time from your account; you keep access until the end of the year you've paid for.

Pass Guarantee. Complete the full prep, sit your exam within 60 days, and if you don't pass we refund 100% of your subscription payments. See the requirements
Secure checkout by Stripe Card, Apple Pay, Google Pay Pass Guarantee

Summarized from ASNT's official candidate information and the rules cited, checked October 2026. Confirm current requirements with ASNT Certification Services LLC (American Society for Nondestructive Testing).

Start the free test